PP333和CCC对紫羊茅矮化效应的影响

分别采用不同浓度的PP333(多效唑)、CCC(矮壮素)对紫羊茅进行叶面喷施处理。结果表明，这2种药剂均减缓了紫羊茅地上部分的生长，抑制叶片增长，减少草坪修剪频率，促进分蘖形成，并使叶片增厚加宽，叶绿素含量提高，因此降低了生产管理成本，并提高了草坪的观赏效果。其中，以250mg／kg的多效唑的抑制效果最好，且药效可以持续一个月左右。     

从纸浆浮油中提取β-谷甾醇的工艺研究

研究了从纸浆浮油中提取β-谷甾醇的工艺路线，经正交试验对结晶和皂化条件进行了优选，并探索了副产品的综合利用．     

网络课件的技术分析与模型构想

借助于现代网络和多媒体技术开展远程教育是新形势下对高等教育的一种有效补充方式，也是拓宽网络应用领域的重要举措．探讨了网络教学辅助软件的开发模式和软件设计的几种形式，提出了一种基于Web的具有自适应能力的网络教学课件模型，并讨论了其实现过程中的关键技术．     

以兽疫链球菌NUF-036分批发酵生产透明质酸的工艺研究及其动力学模型的建立

研究了菌体生长、产物合成及底物消耗的最佳关系,通过5 L实验罐的正交试验,确定了以兽疫链球菌NUF-036分批发酵生产透明质酸的工艺条件通风量2.0 L/min,搅拌转速600r/min,pH=7.5,温度35℃.在此条件下,透明质酸的产量为3.7 g/L,分子质量为3.8×106Da.建立了兽疫链球菌NUF-036分批发酵生产透明质酸的动力学模型.     

《材料力学》CAI课件的设计思路及特点

针对《材料力学》传统教学中存在的问题,采用先进的多媒体CAI课件制作手段研制了《材料力学》多媒体CAI课件。文中介绍了《材料力学》多媒体CAI课件的设计思路及特点。并对下一步的研制工作提出展望。     

高等教育大众化阶段地方综合性大学精英教育的发展

大众教育和精英教育是高等教育发展的两个方向。地方综合性大学一方面要发展大众教育,另一方面要有选择地保留精英教育,参与拔尖创新人才的培养。文章对精英教育重要性、可行性进行了分析,对存在的问题和措施进行了探讨。     

H∞ control for stochastic systems with time-delay

The H∞-control problem of stochastic systems with time-delay is considered. The sufficient conditions are obtained, under which there are always state-feedback control and dynamic output-feedback control so that the resulting closed-loop system is internaly stable and L2 input-output stable in the sense of expectation. Furthermore, the explicit formulas of both kinds of controls are derived. An example is included to illustrate the correctness of theoretic results.     

微纳马达在生物医疗领域中的应用

 作为微纳尺度的动力装置,微纳马达具有体积小、质量轻和驱动力大等优点,在传感检测、微纳加工和环境治理等方面表现出突出的优势,特别是在生物医疗领域具有巨大应用前景。本文阐述了生物医用微纳马达的制备及驱动控制方法,总结了微纳马达在药物靶向运输、细胞识别捕捉、纳米手术、吸附毒素及溶解血栓等生物医疗领域中的应用,并讨论了其在生物医疗领域面临的挑战和未来的发展方向。     

Thermal performance and reduction kinetic analysis of cold-bonded pellets with CO and H_2 mixtures

Cold-bonded pellets, to which a new type of inorganic binder was applied, were reduced by H2–CO mixtures with different H2/CO molar ratios(1:0, 5:2, 1:1, 2:5, and 0:1) under various temperatures(1023, 1123, 1223, 1323, and 1423 K) in a thermogravimetric analysis apparatus. The effects of gas composition, temperature, and binder ratio on the reduction process were studied, and the microstructure of reduced pellets was observed by scanning electron microscopy–energy-dispersive spectrometry(SEM-EDS). The SEM-EDS images show that binder particles exist in pellets in two forms, and the form that binder particles completely surround ore particles has a more significant hinder effect on the reduction. The reduction equilibrium constant, effective diffusion coefficient, and the reaction rate constant were calculated on the basis of the unreacted core model, and the promotion effect of temperature on reduction was further analyzed. The results show that no sintering phenomenon occurred at low temperatures and that the increasing reaction rate constant and high gas diffusion coefficient could maintain the promotion effect of temperature; however, when the sintering phenomenon occurs at high temperatures, gas diffusion is hindered and the promotion effect is diminished. The contribution of the overall equilibrium constant to the promotion effect depends on the gas composition.     

腔镜热变形对高斯镜平凹腔激光场模式的影响

用边界元素法把具有高斯反射镜的平凹腔的衍射积分方程转化为有限阶的矩阵方程,并计算了具有高斯反射镜的平凹腔当平面输出镜发生呈高斯分布的镜面变形时谐振腔基模的场强、相位分布和本征值．结果表明,当变形量较小时,高斯镜平凹腔基模光场半径随腔镜变形量的增大而增大,但不发生畸变,远场分布基本上不受影响,本征值下降甚微,这有效地保持了激光束的质量和功率输出,并利于增益介质的利用．仅当变形量较大,如当中心变形量达到1．2λ以上时,光场分布才发生畸变,远场光斑聚焦特性和中心强度下降,基模冬征值也随变形量的增加大幅下降．