深锥浓密机底流浓度模型及动态压密机理分析

泥层高度和底流浓度是深锥浓密机最为重要的两个参数,因此有必要研究底流浓度随泥层高度的变化规律.采用自制小型深锥浓密机,对尾矿非连续/连续动态压密过程进行了物理实验;借助于有效孔隙比与泥层压强间遵循的Power函数关系,结合对尾矿颗粒的受力分析,推导出了底流浓度与泥层高度的数学模型,揭示了浓密机底流浓度与泥层高度的内在关系,并从尾矿颗粒空间结构的角度解释了该模型的变化规律;结合矿山生产对于底流浓度的要求,应用该数学模型,为其推荐了泥层高度的合理范围,验证了底流浓度数学模型的可靠性.该模型为深锥浓密机的设计和运行提供了理论依据.     

Thermal performance and reduction kinetic analysis of cold-bonded pellets with CO and H_2 mixtures

Cold-bonded pellets, to which a new type of inorganic binder was applied, were reduced by H2–CO mixtures with different H2/CO molar ratios(1:0, 5:2, 1:1, 2:5, and 0:1) under various temperatures(1023, 1123, 1223, 1323, and 1423 K) in a thermogravimetric analysis apparatus. The effects of gas composition, temperature, and binder ratio on the reduction process were studied, and the microstructure of reduced pellets was observed by scanning electron microscopy–energy-dispersive spectrometry(SEM-EDS). The SEM-EDS images show that binder particles exist in pellets in two forms, and the form that binder particles completely surround ore particles has a more significant hinder effect on the reduction. The reduction equilibrium constant, effective diffusion coefficient, and the reaction rate constant were calculated on the basis of the unreacted core model, and the promotion effect of temperature on reduction was further analyzed. The results show that no sintering phenomenon occurred at low temperatures and that the increasing reaction rate constant and high gas diffusion coefficient could maintain the promotion effect of temperature; however, when the sintering phenomenon occurs at high temperatures, gas diffusion is hindered and the promotion effect is diminished. The contribution of the overall equilibrium constant to the promotion effect depends on the gas composition.     

基于Jacobian矩阵的5UPS-RPS并联机构全域性能指标分析

提出一种由一个RPS约束分支和5个UPS主动分支构成的新型空间对称五自由度并联机构.为研究动平台和定平台半径变化对该五自由度并联机构速度性能指标的影响规律,利用虚设机构法求出机构一阶和二阶影响系数矩阵,并推导了速度和加速度表达式,利用推导的Jacobian矩阵对机构进行速度全域性能指标分析,并绘出上述性能指标图谱,得到动平台和定平台尺寸变化对并联机构性能的影响趋势,同时也得到所给动平台和定平台尺寸范围内速度性能较好的尺寸,为机构优化设计提供了理论依据.      

基于二进制熵的加解密函数定位方法

针对二进制程序模糊测试中加解密函数定位准确率低的问题,提出一种基于二进制熵的加解密函数定位方法.该方法对二进制程序的控制流信息进行模型构建以定位程序关键代码,提取关键代码前后的数据流并计算其二进制熵,通过前后二进制熵的关系确定被测代码中是否存在加解密函数.实验结果表明,该方法能够有效发现程序中的加解密函数,准确率大于99%;该方法可以用于提高模糊测试发现漏洞的能力,具有一定的实用价值.      

Improved dehydriding property of polyvinylpyrrolidone coated Mg-Ni hydrogen storage nano-composite prepared by hydriding combustion synthesis and wet mechanical milling

In this work, polyvinylpyrrolidone(PVP) coated Mg_(95)Ni_5 nano-composites were prepared by hydriding combustion synthesis(HCS) plus wet mechanical milling(WM) with tetrahydrofuran(THF) and donated as WM-x wt% PVP(x = 1, 3, 5 and 7) respectively. The phase compositions, microstructures and dehydriding property, as well as the co-effect of PVP and THF were investigated in detail. XRD results showed that the average crystal size of MgH_2 in the milled Mg_(95)Ni_5 decreased from 23 nm without PVP to 18 nm with 1 wt% PVP. The peak temperature of dehydrogenation of MgH_2 in the milled Mg_(95)Ni_5 decreased from 293.0 ℃ without THF to 250.4 ℃ with THF. The apparent activation energy for decomposition of MgH_2 in WM-7 wt% PVP was estimated to be 66.94 kJ/mol, which is 37.70 kJ/mol lower than that of milled Mg_(95)Ni_5 without THF and PVP. PVP and THF can facilitate the refinement of particle size during mechanical milling process. Attributed to small particle sizes and synergistic effect of PVP and THF, the composites exhibit markedly improved dehydriding properties.     

Mechanical characterization and strain-rate sensitivity measurement of Ti- 7333 alloy based on nanoindentation and crystal plasticity modeling

The relationship between crystal orientations and meso-mechanical properties of β phase Ti-7333 titanium was investigated through the combination of nanoindentation experiments and simulation. The crystal plasticity finite element(CPFE) model for nanoindentation of single body-centered cubic crystal was established based on the experimental data. And the crystal plasticity constitutive law was implemented to simulate the nanoindentation process, obtaining satisfied results with an acceptable error. From the simulated pileup morphology patterns with different crystal orientations, it was found that the β phase experienced a symmetrical and orientation-related deformation process. Meanwhile, the strain-rate sensitivity(SRS) of β phase was investigated through nanoindentation tests based on continuous stiffness measurement(CSM) under different strain rates,varying between 0.2, 0.05 and 0.01 s~(-1). Two grains with different orientations exhibited similar SRS exponents,m, calculated from the experimental results.     

WO3 nanoflakes decorated with CuO clusters for enhanced photoelectrochemical water splitting

The low quantum efficiency arising from poor charges transfer and insufficient light absorption is one of the critical challenges toward achieving highly efficient water splitting in photoelectrochemical cells. Three dimensions(3D) structures and heterojunctions have received intensive research interests recent years due to their excellent ability to separate photo-generated charges as well as the enhanced light harvesting property. Herein,3 D Cu O/WO_3 structure was fabricated through a facile solvothermal method followed by chemical bath deposition. The loading of Cu O clusters on WO_3 nanoflake arrays results in a much improved photocurrent density compared with that of pristine WO_3 nanoflake arrays, which reaches 1.8 m A/cm2 at 1.23 V vs. the reversible hydrogen electrode. The electrochemical impedance spectroscopy measurement demonstrates that the improved performance of Cu O/WO_3 electrode is attributed to the accelerated charge transfer kinetics as a result of the desirable band alignment in Cu O/WO_3 heterojunction. This work demonstrates a facile strategy to construct superior WO_3 electrode, which will ultimately allow for efficient storage of solar energy into hydrogen.     

基于碳量子点的TiO2改性及降解污染物性能

采用溶胶-凝胶法合成掺入碳量子点(CQDs)的TiO₂纳米复合光催化剂,通过荧光光谱、紫外-可见吸收光谱、X射线衍射、扫描电镜等进行表征,并在可见光下降解亚甲基蓝(MB)染料溶液以评价其光催化性能.研究表明,CQDs具备上转换荧光特性,掺入CQDs的TiO₂样品可见光响应明显提升.水热法180℃下反应6h制备的CQDs,其溶液加入量为10mL时TiO₂/CQDs样品光催化活性最高,115min后MB的降解率达80%.TiO₂/CQDs样品主要以锐钛矿相存在,颗粒呈球形,比表面积高达200m³·g^-1.     

C∞函数芽k完备的计算

在C∞函数芽的有限决定性理论中,如果芽f是k完备:Mk(∈)MJ(f),则f必有限k-决定.然而,给定一个芽f,去验证f是k完备的并找出满足条件Mk(∈)MJ(f)的最小正整数k是实际计算中的一个困难.我们将应用C∞函数芽环中的有限余维理想的某些性质和Nakayama引理去得出这一抽象的代数条件的计算方法.实例表明:在通常情况下,我们提出的方法是有效的.     

近年来CCA在气候分析与气候预测中的应用

详细论述了CCA方法应用于气候分析与预测中所取得的成果。着重分析了CCA方法在理论上和实践上所存在的优缺点。给出了CCA在我国汛期预报中应用的实例。