基于VB环境的滚齿刀辅助设计系统

介绍了基于VB环境的滚齿刀CAD系统的构成与主要模块功能．该系统可对滚齿刀的齿形及结构参数进行设计计算，并将结果保存到数据库中进行管理，借助VB的强大功能和AutoCAD与高级语言的接口，可获AutoCAD的图形交换文件DXF，并自动生成滚齿刀的零件图纸等设计文件．     

萝卜播期和栽培密度对产量及性状的影响

以“泸优一号”白萝卜为试材,研究不同时期播种和不同种植群体对萝卜产量和开花的影响。结果表明:播期推迟,植株生长势减弱,肉质根产量下降;开花量减少,结实率下降。高产栽培的适宜播期为 8月下旬至 9月上旬,最佳种植规格50 cm×33 cm,每穴 2苗。萝卜不同栽培密度下的根长与横径之比、株高与开展度之比可作为根形和株型划分的依据。     

英汉广告文体的比较及其功能

经济全球化时代的广告语变得越来越重要。本文讨论英汉广告的主要句式、结构及其功能。通过英汉广告文体的对比分析，透视了英汉广告语体的特点，使我们更好地运用不同的语体传递所要传递的广告信息。     

恩施州劳务输出效应分析

结合实际情况和数据资料,分析了恩施州人口与劳动力现状、农村劳动力输出的情况,研究结果显示:农村剩余劳动力转移与区域经济增长明显正相关,对农民人均收入和GDP增长发挥着重要作用.     

2.5 G ATM IP宽带测试接口的研制

实现了国内首例全面实现2．5G ATM／POS、GE、FE的宽带网络测试接口的研制．测试接口采用一种产生分析模块，支持多种接口模块，之间使用标准接口连接，主要发送和分析逻辑采用FPCA(Field Programmable Gate Array)实现，对外通讯接口是以太网口．采用实时操作系统，进行系统的初始化配置等以及与终端的通讯．系统集成度高，控制灵活，易于软件和逻辑升级．     

Research and Application of All-Position Automatic Welding Machine

The all-position automatic welding machine system is the special welding system for pipeline girth automatic welding on site, which has been widely used in the long distance pipeline construction projects due to the advantages of automatic control for welding parameters at all position, moving speed of bugs and operating. This automatic pipeline welding system has been successfully used in several main pipeline projects in China, and has been approved by the constructors with the benefits of higher quality passing rate, higher welding efficiency and lower labor intensity.     

Non-Monomial Permutations with Differential Uniformity Six

In this paper, a family of non-monomial permutations over the finite field \({F_{{2^n}}}\) with differential uniformity at most 6 is proposed, where n is a positive integer. The algebraic degree of these functions is also determined.     

铆接结构中缺陷的脉冲远场涡流定量评估技术

针对飞机机身铆接结构检测中难以对缺陷进行定量评估的问题,将脉冲远场涡流检测技术运用于铆接结构缺陷检测之中。利用脉冲激励频谱成分丰富、可提取特征信息较多的优势对铆接结构中缺陷的定量评估技术展开研究。首先,建立铆接结构脉冲远场涡流三维检测模型,对缺陷进行检测,从而确定缺陷位置。在此基础上,分析缺陷类型、尺寸对检测信号的影响发现直接耦合分量幅值与上下表面缺陷深度之间具有不同的变化关系,从而实现对缺陷的分类识别。最终,利用信号的过零时间变化量实现对缺陷深度的定量,在缺陷深度已知的情况下,进一步利用直接耦合分量幅值变化对上表面缺陷长度进行定量;利用间接耦合分量幅值变化对下表面缺陷长度进行定量。     

Fabrication of homogeneously dispersed graphene/Al composites by solution mixing and powder metallurgy

Graphene-reinforced aluminum (Al) matrix composites were successfully prepared via solution mixing and powder metallurgy in this study. The mechanical properties of the composites were studied using microhardness and tensile tests. Compared to the pure Al alloy, the graphene/Al composites showed increased strength and hardness. A tensile strength of 255 MPa was achieved for the graphene/Al composite with only 0.3wt% graphene, which has a 25% increase over the tensile strength of the pure Al matrix. Raman spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy were used to investigate the morphologies, chemical compositions, and microstructures of the graphene and the graphene/Al composites. On the basis of fractographic evidence, a relevant fracture mechanism is proposed.     

TTAC-HPMo/SiO_2催化剂的表征及其氧化脱硫性能分析

以十四烷基三甲基氯化铵(TTAC)为模板剂,正硅酸乙酯(TEOS)为硅源,采用溶胶-凝胶法制备TTAC-HPMo/SiO_2催化剂,利用FTIR、XRD、SEM和N_2吸附-脱附等技术对其进行表征,并分析催化剂制备条件和反应条件对模型油氧化脱硫性能的影响。结果表明,在m(HPMo)/m(SiO_2)=15%、焙烧温度为400℃条件下所制TTAC-HPMo/SiO_2催化剂,其孔隙结构发达、氧化脱硫性能最佳;对于10mL以二苯并噻吩(DBT)为目标含硫化合物的模型油(硫含量为400μg/g),当m(TTAC-HPMo/SiO_2)/m(模型油)=0.43%、V(H_2O_2)/V(模型油)=0.2%、反应温度为60℃、反应时间为14min时,所制TTAC-HPMo/SiO_2催化剂对模型油中DBT的脱除率达到100%。