加快制造业信息化工程技术研究中心的建设

本文围绕国家“十五”重大项目制造业信息化工程的要求,分析了建设和强化制造业信息化工程技术研究中心的重要性,提出了总体建设规划,论述了学术队伍建设和人才培养的基本构思,提出了科学研究发展的主要任务,阐明了学科和实验室建设发展规划和应采取的措施。     

基于VB环境的滚齿刀辅助设计系统

介绍了基于VB环境的滚齿刀CAD系统的构成与主要模块功能．该系统可对滚齿刀的齿形及结构参数进行设计计算，并将结果保存到数据库中进行管理，借助VB的强大功能和AutoCAD与高级语言的接口，可获AutoCAD的图形交换文件DXF，并自动生成滚齿刀的零件图纸等设计文件．     

萝卜播期和栽培密度对产量及性状的影响

以“泸优一号”白萝卜为试材,研究不同时期播种和不同种植群体对萝卜产量和开花的影响。结果表明:播期推迟,植株生长势减弱,肉质根产量下降;开花量减少,结实率下降。高产栽培的适宜播期为 8月下旬至 9月上旬,最佳种植规格50 cm×33 cm,每穴 2苗。萝卜不同栽培密度下的根长与横径之比、株高与开展度之比可作为根形和株型划分的依据。     

英汉广告文体的比较及其功能

经济全球化时代的广告语变得越来越重要。本文讨论英汉广告的主要句式、结构及其功能。通过英汉广告文体的对比分析，透视了英汉广告语体的特点，使我们更好地运用不同的语体传递所要传递的广告信息。     

催化剂、基底对ECR-CVD法制备碳纳米管的影响

采用电子回旋共振微波等离子体化学气相沉积技术(ECR CVD),CH4和H2为气源,分别以Fe3O4,Co纳米粒子及Fe(NO)3溶胶为催化剂在多孔硅基底上制备了碳纳米管;在Si(111)和石英基底上以Fe3O4纳米粒子为催化剂实现了碳纳米管的生长·使用扫描电子显微镜(SEM)、透射电子显微镜(TEM)对样品的形貌、尺寸及结构进行表征·讨论了催化剂和基底对碳纳米管形貌、密度和取向性的影响·结果表明:催化剂影响碳纳米管的成核密度和生长速度,基底通过影响催化剂的特性和分布均匀性,对碳纳米管的形貌和生长模式产生重要影响,以Fe3O4为催化剂在多孔硅上实现了碳纳米管的最优定向生长·     

恩施州劳务输出效应分析

结合实际情况和数据资料,分析了恩施州人口与劳动力现状、农村劳动力输出的情况,研究结果显示:农村剩余劳动力转移与区域经济增长明显正相关,对农民人均收入和GDP增长发挥着重要作用.     

2.5 G ATM IP宽带测试接口的研制

实现了国内首例全面实现2．5G ATM／POS、GE、FE的宽带网络测试接口的研制．测试接口采用一种产生分析模块，支持多种接口模块，之间使用标准接口连接，主要发送和分析逻辑采用FPCA(Field Programmable Gate Array)实现，对外通讯接口是以太网口．采用实时操作系统，进行系统的初始化配置等以及与终端的通讯．系统集成度高，控制灵活，易于软件和逻辑升级．     

Research and Application of All-Position Automatic Welding Machine

The all-position automatic welding machine system is the special welding system for pipeline girth automatic welding on site, which has been widely used in the long distance pipeline construction projects due to the advantages of automatic control for welding parameters at all position, moving speed of bugs and operating. This automatic pipeline welding system has been successfully used in several main pipeline projects in China, and has been approved by the constructors with the benefits of higher quality passing rate, higher welding efficiency and lower labor intensity.     

Non-Monomial Permutations with Differential Uniformity Six

In this paper, a family of non-monomial permutations over the finite field \({F_{{2^n}}}\) with differential uniformity at most 6 is proposed, where n is a positive integer. The algebraic degree of these functions is also determined.     

Fabrication of homogeneously dispersed graphene/Al composites by solution mixing and powder metallurgy

Graphene-reinforced aluminum (Al) matrix composites were successfully prepared via solution mixing and powder metallurgy in this study. The mechanical properties of the composites were studied using microhardness and tensile tests. Compared to the pure Al alloy, the graphene/Al composites showed increased strength and hardness. A tensile strength of 255 MPa was achieved for the graphene/Al composite with only 0.3wt% graphene, which has a 25% increase over the tensile strength of the pure Al matrix. Raman spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy were used to investigate the morphologies, chemical compositions, and microstructures of the graphene and the graphene/Al composites. On the basis of fractographic evidence, a relevant fracture mechanism is proposed.