Deep cleaning of a metallurgical zinc leaching residue and recovery of valuable metals

Huge quantities of zinc leaching residues (ZLRs) generated from zinc production are dumped continuously around the world and pose a potential environmental threat because of their considerable amounts of entrained heavy metals (mainly lead). Most ZLRs have not been properly treated and the valuable metals in them have not yet been effectively recovered. Herein, the deep cleaning of a ZLR and recovery of valuable metals via a hydrometallurgical route were investigated. The cleaning process consists of two essential stages:acid leaching followed by calcium chloride leaching. The optimum conditions for extracting zinc, copper, and indium by acid leaching were a sulfuric acid concentration of 200 g·L-1, a liquid/solid ratio of 4:1 (mL/g), a leaching time of 2 h, and a temperature of 90℃. For lead and silver extractions, the optimum conditions were a calcium chloride concentration of 400 g·L-1, a pH value of 1.0, a leaching time of 1 h, and a temperature of 30℃. After calcium chloride leaching, silver and lead were extracted out and the lead was finally recovered as electrolytic lead by electrowinning. The anglesite phase, which poses the greatest potential environmental hazard, was removed from the ZLR after deep cleaning, thus reducing the cost of environmental management of ZLRs. The treatment of chlorine and spent electrolyte generated in the process was discussed.     

Paleocurrent analysis on the basal conglomerate of the model Changzhougou formation in Qian’an

The paleoflow direction of the basal conglomerate of the Changzhougou formation is obtained by the paleocurrent analysis of certain sedimentary structures, and the ancient sedimentary environment of the Qian'an Region is determined by observing the psephicity and gradation of gravel in conglomerate. The results show that the paleoflow direction is from northwest to southwest, and the paleocurrent data manifest a single-peak style in a rose diagram. The average paleoflow direction in the Qian'an region is 265°. The basal conglomerate is of littoral facies, and the sediments of conglomerates are mainly sourced from Shanhaiguan.     

货币账户带时滞的期权定价

在股票价格过程和货币市场账户均受时滞影响时,利用无风险对冲原理和鞅定价原理,得到了标准欧式期权的价格公式.研究表明,时滞对期权价格公式有明显的影响.     

Development of liquid-nitrogen-cooling friction stir spot welding for AZ31 magnesium alloy joints

A liquid-nitrogen-cooling friction stir spot welding (C-FSSW) technology was developed for welding AZ31 magnesium alloy sheets. The liquid-nitrogen cooling degraded the deformability of the welded materials such that the width of interfacial cracks increased with increasing cooling time. The grain size of the stirred zone (SZ) and the heat-affected zone (HAZ) of the C-FSSW-welded joints decreased, whereas that of the thermomechanically affected zone (TMAZ) increased with increasing cooling time. The maximum tensile shear load of the C-FSSW-welded joints welded with a cooling time of 5 or 7 s was larger than that of the friction stir spot welding (FSSW)-welded joint, and the tensile shear load decreased with increasing cooling time. The microhardness of the C-FSSW-welded joints was greater than that of the FSSW-welded joint. Moreover, the microhardness of the SZ and the HAZ of the C-FSSW-welded joints increased, whereas that of the TMAZ decreased, with increasing cooling time.     

Studies on induction hardening of powder-metallurgy-processed Fe-Cr/Mo alloys

Induction hardening of dense Fe-Cr/Mo alloys processed via the powder-metallurgy route was studied. The Fe-3Cr-0.5Mo, Fe-1.5Cr-0.2Mo, and Fe-0.85Mo pre-alloyed powders were mixed with 0.4wt%, 0.6wt%, and 0.8wt% C and compacted at 500, 600, and 700 MPa, respectively. The compacts were sintered at 1473 K for 1 h and then cooled at 6 K/min. Ferrite with pearlite was mostly observed in the sintered alloys with 0.4wt% C, whereas a carbide network was also present in the alloys with 0.8wt% C. Graphite at prior particle boundaries led to deterioration of the mechanical properties of alloys with 0.8wt% C, whereas no significant induction hardening was achieved in alloys with 0.4wt% C. Among the investigated samples, alloys with 0.6wt% C exhibited the highest strength and ductility and were found to be suitable for induction hardening. The hardening was carried out at a frequency of 2.0 kHz for 2-3 s. A case depth of 2.5 mm was achieved while maintaining the bulk (interior) hardness of approximately HV 230. A martensitic structure was observed on the outer periphery of the samples. The hardness varied from HV 600 to HV 375 from the sample surface to the interior of the case hardened region. The best combination of properties and hardening depth was achieved in case of the Fe-1.5Cr-0.2Mo alloy with 0.6wt% C.     

Cobalt doped titanate nanotubes: Synthesis and properties

Cobalt oxide doped titanate nanotubes are synthesized with a simple hydrothermal treatment of mixed Co_3O_4 and TiO_2 powders. The formed tubular nanostructure, chemical composition,and the elemental distribution are analyzed using TEM, BET, FTIR, XRD, and XPS. The electrocatalytic activity towards oxygen evolution reactions and photodegradation against Rhodamine B are investigated. It has been found out that the oxygen evolutions starts at 0.8 V and reaches 0.98 mA ·cm~(–1) at 1.4 V vs. SCE. For photodegradation of Rhodamine B, the concentration decreased to 24% after 1 h irradiation using the sample with a mass percentage of 5% cobalt. The results demonstrate that the cobalt oxide doped titanate nanotubes are good candidates as electrocatalysts and photocatalytic materials.     

Secure pairing with wearable devices by using ambient sound and light

Wearable devices usually work together with smart phones. To ensure only legitimate smart phones can read the data, they must conduct pairing to establish a shared key. Traditional pairing methods require that the pairing devices have a keyboard or screen for user interaction. However, due to the size limitation, keyboards or screens are hard to be installed in the wearable devices. To solve this problem, we propose a novel pairing method by using ambient sound and light. In this new scheme, any pairing request from smart phone will trigger wearable device vibration. Only after users press the confirm key on the device can the pairing process continues. Then pairing devices collect ambient sound and light at the predetermined time and establish a shared key by using the Diffie-Hellman protocol. To protect against potential man-in-the-middle attacks in the key establishment process, an improved interlock protocol with sound and light comparison is conducted to authenticate the key. If both the sound and light collected by the pairing devices are similar enough, the key is accepted. Otherwise, it is rejected. Compared with current context based pairing methods, our scheme does not impose strict synchronization on devices to collect ambient context data. Moreover, our scheme need not collect and exchange contextual information for multiple times to resist offline brute force attacks. The experimental results and security analysis prove the effectiveness of our scheme.     

井下车用零件多裂纹扩展的时变可靠性分析

针对工程中井下车用零件的多裂纹损伤问题，通过扭转疲劳试验模拟了车用零件中传动轴的疲劳损伤，并应用长焦显微镜与照相机相结合的测量法对零件一定疲劳循环次数后的表面裂纹进行了测量统计，同时以Paris模型及剩余强度估算模型对统计数据进行处理，得到了剩余强度.再应用所建立的时变可靠性数学模型，求取了零件时变强度的漂移率及波动率，并最终得出了该零件在一定疲劳循环后的可靠度.该方法从实际应用上解决了时变理论对零部件时变强度的动态检测问题，将时变理论向工程化应用推进一步，具有良好的应用前景.     

Benthic foraminiferal δ~(13)C minimum events in the southeastern Okhotsk Sea over the last 180 ka

A total of six d13C minimum events,i.e.,VI,V,IV,III,II,and I,were observed via a stable carbon and oxygen isotope analysis of infaunal benthic foraminifera Uvigerina spp.in gravity core OS03-1 in the southeastern Okhotsk Sea over the last 180 ka.These events occurred at112–109,102–90,85–76,57–54,44–40,and 17–10 ka BP.The largest negative excursions reached 2.5%in event V and were greater than 1%in the other events.We proposed that all d13C minimum events were caused by the increase in sea surface water productivity,the weakened formation of Okhotsk Sea intermediate water,and the enhancement of the oxygen minimum zone.The negative excursions were unaffected by methane hydrate destabilization and subsequent methane release based on the results obtained by using archaeal lipid markers.