空基外辐射源定位系统的可观测性分析

针对空基外辐射源定位(airborne external transmitter location, AETL)系统的可观测性问题,建立了AETL系统的二维运动学模型与量测方程,基于离散化的非线性可观测理论求解系统的可观测矩阵,并分析证明了系统不可观测的条件。基于矩阵分析理论的条件数定义了系统的可观测度,并仿真分析了观测站运动参数以及目标和外辐射源的机动参数对系统可观测度的影响。结果表明,当观测站与目标和外辐射源共线或目标和外辐射源保持径向运动时系统不可观测;当系统可观测时,观测站与目标和外辐射源之间的相对速度越小,系统可观测度越大。研究结果可为观测站制定机动策略提高系统定位性能提供有效的参考依据。     

多精英采样与个体差分学习的分布估计算法

提出了基于多精英采样和差分搜索的分布估计算法EDA-M/D (Estimation distribution algorithm based on multiple elites sampling and individuals differential search)。EDA-M/D利用多精英个体独立采样生成子代来提升算法全局搜索能力,利用精英群体分布的σ²约束采样半径,实现种群从全局搜索逐步过度到局部搜索。当精英群体停滞时,劣势个体借助精英群体的μ和种群历史最优解进行差分搜索,帮助种群跳出局部最优解。通过多精英采样与差分搜索的自适应协同实现种群宏观信息与个体微观信息的有机融合。实验结果表明EDA-M/D在稳定性和搜索能力方面均表现出明显的优势。     

超启发式DE算法求解零等待发酵工艺调度

为解决具备间歇过程特点的零等待发酵工艺调度过程中易变质的难点,提出了一种超启发式差分算法,并将最小化最大完工时间设置为优化目标。此算法分为2层,高层为改进的自适应差分进化算法,来对低层的启发式操作进行选择排序。而低层组合排序成了新的算法对问题域进行操作,加入模拟退火算法避免陷入局部最优。所提出的方法具有学习的机制,对不同问题具有较强的泛化能力。通过测试算例和实际生产进行算法的比较和求解验证了此算法的有效性,结果表明所提出的算法比传统的启发式算法性能更优。     

Nuclear Norm Subspace System Identification and Its Application on a Stochastic Model of Plague

The discrete-time model of plague is deduced by zero-order holder based on the continuoustime model. Due to the existence of stochastic disturbances, the stochastic model is given corresponding to the discrete-time model. The state estimation and noise reduction of the stochastic model are achieved by designing Kalman filter. Nuclear norm minimization is to structure the low-rank matrix approximation instead of the singular value decomposition in the process of subspace system identification. According to the plague data from the World Health Organization, the system matrices and noise intensity of the model are identified. Simulations are carried out to show the higher approximation capability of the proposed method.     

A Constrained Interval-Valued Linear Regression Model: A New Heteroscedasticity Estimation Method

Linear regression models for interval-valued data have been widely studied. Most literatures are to split an interval into two real numbers, i.e., the left- and right-endpoints or the center and radius of this interval, and fit two separate real-valued or two dimension linear regression models. This paper is focused on the bias-corrected and heteroscedasticity-adjusted modeling by imposing order constraint to the endpoints of the response interval and weighted linear least squares with estimated covariance matrix, based on a generalized linear model for interval-valued data. A three step estimation method is proposed. Theoretical conclusions and numerical evaluations show that the proposed estimator has higher efficiency than previous estimators.

     

Distributed Second-Order Continuous-Time Optimization via Adaptive Algorithm with Nonuniform Gradient Gains

Journal of Systems Science and Complexity - This paper addresses the distributed adaptive optimization problem over second-order multi-agent networks (MANs) with nonuniform gradient gains. A...     

基于GIS、GPS、GSM的救护车智能管理系统研究

文章提出了一种救护车智能管理系统。该系统基于GIS、GPS、GSM技术,它能在发生紧急事故时,提供救护车到达出事地点,再从出事地点到达最近医院的最佳路径,该系统能够使救护车始终处于监控之下。我们通过设计有效的数据结构和算法来实现系统的上述功能。     

Design and validation of wireless acceleration sensor network for structural health monitoring

0IntroductionCivil engineeringstructures suffer damages caused byenvironmental loads,fatigue,caustic effect and materialaging;thus,their strength reduces inevitably during theservice time.In order to assess these damages and makeappropriate decisions to keep the structures in good ser-vice,itis essential toimplement a damage detectionstrat-egy,and the process is referred to as structural healthmonitoring(SHM)[1].In an SHMsystem,a set of sen-sors are mountedinstructuresto measurethe structure…     

Study on the application of active balancing device to solve the vibration problem for the rotor with bending fault

The rotor with bending faults that occurrs on the rotating machinery usually vibrates seriously. This paper investigates to apply the active balancing device on a flexible rotor with bending faults to solve the vibration problem. Two problems are studied by finite element method firstly： Where the balance actuator is fixed on the shaft and how much the balancing capacity of the active balancing device is needed. The experiment is then carried out on the test rig, which consists of a flexible rotor with bending faults. The test results indicate that the bending rotor peak vibration response can be decreased from 550~m to 40~tm below by using the active balancing device. The peak vibration response decreases approximately by 93 %. The synchronous vibration due to the rotor bending faults can be controlled effectively by using ac- tive balancing device. The active balancing device is especially adapted to solve the problem caused by thermal distortion with time-variation and randomness, which is varied with working conditions, thus it has good practical value in practice.