Joint Strength with Soldering of Al2O3 Ceramics After Ni-P Chemical Plating

Ni-P alloy was chemically plated on Al2O3 ceramics to produce uniform alloy coatings at temperatures below 70~C. Cu metal was electroplated onto the Ni-P coating to facilitate the soldering and shorten the chemical plating time. Then, the electroplated ceramic specimens were soldered with 60 wt.% Sn-40 wt.% Pb solder in active colophony. The highest shear strength was acquired after the heat treatment at 170℃ for 15 min. The joint fractures mostly propagated along the interface between the ceramics and the Ni-P coating, with some fracture in both the ceramics and the Ni-P coating near the interface and some along the interface between the Cu and Ni-P coatings. The results show that ceramic surface roughness and the chemical plating parameters influence the coating quality, and that suitable heat treatment before the soldering also improves the adhesion between the ceramics and Ni-P coatings, thus strengthening the joints.     

Bang bang control of unified chaotic system

The unified chaotic system contains the Lorenz system and the Chen system as two dual systems at the two extremes of its parameter spectrum. This paper presents the design of bang bang controller for unified system and multitude of numerical experiments under various control parameters. Numerical experiments meet the theoretic proof perfectly and convincingly demonstrated the controller can be effectively used for unified systems with uncertainty of the equilibrium points. The method enriches the applications of chaotic control. Foundation item: Supported by the National Natural Science Foundation of China(50209012) Biography: Deng Xiao-ming (1980-), male, Master candidate, research direction: chaos control.     

煤吸附解吸电磁改性及定量分析

用容量法对焦作朱村矿变质无烟煤在不同频率的交变电磁场中吸附解吸特征进行了研究。实验结果表明：不同频率的交变电磁场作用下，煤吸附C02、N2仍旧符合Langmiur方程；交变电磁场减弱了煤的吸附能力，减小了吸附常数b值，但饱和吸附量(a值)基本上不变．是典型的表面改性现象，并从量的角度分析其改性的程度。     

热力管网的阻力及平衡与调整

对集中供热管网的阻力及存在的不平衡现象，从理论上进行了分析和探讨，并结合实际运行情况进行了平衡调整，使热网的稳定性得到了改善和提高，收到了良好的效果。     

通过实测室温确定住宅的自然通风状况

住宅自然通风状况的研究有助于住宅设计,使之更加有利于改善空气品质和节能。通过分析比较实测室温和模拟室温,根据状态空间法逐时确定出房间的通风换气频率。并以北京市的3户住宅为研究对象,从以下几个方面讨论计算结果的有效性,模拟室温的计算误差满足精度要求;计算通风换气频率一般小于10h-1,但最高可达50h-1,同时,计算通风换气频率的变化表现出了风压和住户调节行为的影响。故计算通风换气频率大体上符合住宅实际的自然通风状况。     

管理系统的最经济控制问题

依据最经济控制问题的概念及其对无确定性数学模型系统分析存在的局限性，对现代管理系统最经济控制问题，提出了在满足系统基本要求前提下。实现控制功能及品质与控制成本比最佳或最划算的模型定义，并对管理系统的可靠性、ABC管理法、WSR方法论等方面的可靠性成本、运行成本和最佳收益等最经济控制问题进行了研究．     

矿区最优投资分配动态规划模型研究

应用动态规划的理论,针对矿区建设的特点,以投资呆滞损失和欠产损失为主优化目标,以初期投资少为次优化目标,建立了矿区建设投资最优分配的多阶段动态规划投资模型,并给出了模型的解法.最后以我国某矿区为实例,应用模型进行求解,得出了满意结果.     

闸河区周边重合断裂方位分布特征及其导水趋势分析

本文应用了遥感这一先进工具,在地壳表层现实资料及地球遥感影象特征基础上,发展了遥感地质灾害方面研究新理论——重合断裂方位破裂理论,来为防治水害直接提供导水断裂趋势分布特征.     

干部功能的模糊测评

利用模糊数学的分析方法对干部功能进行综合测评,确定干部的功能等级。     

KNA算法计算单零点多项式全部零点的复杂性

证明用KNA算法计算n次单零点多项式全部零点所需的多项式计值次数不超过O(n~3 log_2(n/ε)),其中ε是计算精度。