Microstructural characterization and oxidation resistance of multicomponent equiatomic CoCrCuFeNi-TiO high-entropy alloy

CoCrCuFeNi-TiO was prepared by arc melting of the pure elements and Ti₂CO powder under an Ar atmosphere. Both CoCrCuFeNi and CoCrCuFeNi-TiO alloys are composed of a face-centered cubic (fcc) solid solution, whereas the alloys of CoCrCuFeNi-TiO are basically composed of an fcc solid solution and TiO crystals. The microstructures of CoCrCuFeNi-TiO are identified as dendrite and interdendrite structures such as CoCrCuFeNi. The morphology of TiO is identified as an equiaxed crystal with a small amount of added Ti₂CO. By increasing the amount of Ti₂CO added, the TiO content was dramatically increased and part of the equiaxed crystals changed to a dendrite structure. A test of the oxidation resistance demonstrates that the oxidation resistance of CoCrCuFeNi-TiO is better than that of CoCrCuFeNi. However, as the TiO content increases further, a corresponding decrease is observed in the oxidation resistance.     

Effect of melting temperature on microstructural evolutions,behavior and corrosion morphology of Hadfield austenitic manganese steel in the casting process

In this study, the effect of melting temperature on the microstructural evolutions, behavior, and corrosion morphology of Hadfield steel in the casting process is investigated. The mold was prepared by the sodium silicate/CO₂ method, using a blind riser, and then the desired molten steel was obtained using a coreless induction furnace. The casting was performed at melting temperatures of 1350, 1400, 1450, and 1500℃, and the cast blocks were immediately quenched in water. Optical microscopy was used to analyze the microstructure, and scanning electron microscopy (SEM) and X-ray diffractrometry (XRD) were used to analyze the corrosion morphology and phase formation in the microstructure, respectively. The corrosion behavior of the samples was analyzed using a potentiodynamic polarization test and electrochemical impedance spectroscopy (EIS) in 3.5wt% NaCl. The optical microscopy observations and XRD patterns show that the increase in melting temperature led to a decrease of carbides and an increase in the austenite grain size in the Hadfield steel microstructure. The corrosion tests results show that with increasing melting temperature in the casting process, Hadfield steel shows a higher corrosion resistance. The SEM images of the corrosion morphologies show that the reduction of melting temperature in the Hadfield steel casting process induced micro-galvanic corrosion conditions.     

Mineral-phase evolution and sintering behavior of MO-SiO2-Al2O3-B2O3 (M=Ca,Ba) glass-ceramics by low-temperature liquid-phase sintering

In this work, network former SiO₂ and network intermediate Al₂O₃ were introduced into typical low-melting binary compositions CaO·B₂O₃, CaO·2B₂O₃, and BaO·B₂O₃ via an aqueous solid-state suspension milling route. Accordingly, multiple-phase aluminosilicate glass-ceramics were directly obtained via liquid-phase sintering at temperatures below 950℃. On the basis of liquid-phase sintering theory, mineral-phase evolutions and glass-phase formations were systematically investigated in a wide MO-SiO₂-Al₂O₃-B₂O₃ (M=Ca, Ba) composition range. The results indicate that major mineral phases of the aluminosilicate glass-ceramics are Al₂₀B₄O₃₆, CaAl₂Si₂O₈, and BaAl₂Si₂O₈ and that the glass-ceramic materials are characterized by dense microstructures and excellent dielectric properties.     

钢铁行业烧结烟气多污染物协同净化技术研究进展

基于我国钢铁行业烧结烟气排放标准、排放特征和现行污染物控制技术,分析了国内外先进的多污染物协同控制技术——活性炭(焦)吸附工艺、湿法脱硫除尘+选择性催化还原协同净化技术、循环流化床多组分污染物协同净化工艺、高性能烧结废气净化工艺、新型密相半干法烟气集成治理技术等工艺的技术思路、特点和存在问题等,并针对钢铁行业的实际需求对多污染物协同控制技术的发展提出了建议.     

高压天然气管道喷射火热辐射计算

天然气燃爆喷射火事故可能造成人员建筑严重损害,为研究大型天然气喷射火燃爆特性,使用CFD计算软件,对质量流量在5 kg/s以上,压力分别为12 MPa与6 MPa,泄漏孔径在25 mm、50 mm与100 mm时的高压天然气喷射火进行仿真,得到这六种工况下喷射火火焰尺寸、温度分布和近地热辐射强度分布曲线,并得到喷射火长度与宽度和泄漏孔直径的线性变化关系.与喷射火常用的Thornton模型对比,仿真结果计算的火焰长度基本符合,热辐射结果在泄漏中心30 m以外基本相近,两种方法都可用于估算远距离喷射火热辐射强度,为天然气设施安全设计提供参考.     

基于分组简化粒子群算法的盲源分离

传统盲源分离算法普遍存在收敛精度低和易陷入局部最优的缺点,针对上述问题,提出将蛙跳算法的分组思想应用到盲源分离算法中.该分组思想是将整个粒子群分为多组子群体,每组粒子在进行组内寻优的同时进行全局寻优,从而增加了粒子之间的差异性,可以有效避免早熟收敛.该算法以负熵为目标函数,通过对分离矩阵进行调整,使各个信号分量之间相互独立,从而完成对瞬时混合信号的盲源分离.实验仿真结果表明,提出的算法与基本的粒子群盲源分离算法相比,能有效避免早熟收敛并进一步提高收敛精度和算法的稳定性.     

A Proof of the Duality of the DINA Model and the DINO Model

The Deterministic Input Noisy Output “AND” gate (DINA) model and the Deterministic Input Noisy Output “OR” gate (DINO) model are two popular cognitive diagnosis models (CDMs) for educational assessment. They represent different views on how the mastery of cognitive skills and the probability of a correct item response are related. Recently, however, Liu, Xu, and Ying demonstrated that the DINO model and the DINA model share a “dual” relation. This means that one model can be expressed in terms of the other, and which of the two models is fitted to a given data set is essentially irrelevant because the results are identical. In this article, a proof of the duality of the DINA model and the DINO model is presented that is tailored to the form and parameterization of general CDMs that have become the new theoretical standard in cognitively diagnostic modeling.     

信息化教学中的弗兰德斯分析法应用与研究

研究了在信息化教学的背景下传统弗兰德斯分析法的缺陷与不足,提出一种改进型弗兰德斯分析法,并基于真实课堂数据做了深入分析与探讨.     

Generalized Multivariate Gumbel Distributions——Dependence,Aging Properties and Applications

This paper introduces a generalized multivariate Gumbel (GMG) distribution using a survival copula. Various dependence properties of the GMG distribution and some analytical properties of the generators of the GMG distribution are studied. Furthermore, the authors also investigate the dependence behavior of the residual lifetime vector of the GMG distribution. As an illustration, the GMG distribution is applied to fit a real data set.     

A two-dimensional improvement for Farr-Gao algorithm

Farr-Gao algorithm is a state-of-the-art algorithm for reduced Gröbner bases of vanishing ideals of finite points, which has been implemented in Maple as a build-in command. This paper presents a two-dimensional improvement for it that employs a preprocessing strategy for computing reduced Gröbner bases associated with tower subsets of given point sets. Experimental results show that the preprocessed Farr-Gao algorithm is more efficient than the classical one.