基于可编程GPU的红外场景仿真实现

针对以前红外仿真方法细节差、实时性不高等技术难点,提出了一种新的红外物理模型实现方法。该方法将物理信息与物体的几何模型顶点绑定,提高了对红外场景的描述细节。该方法对物理模型的计算在CPU与GPU之间进行了分配,充分利用了可编程GPU的强大运算能力,有效提高了红外场景生成的实时性。讨论了几种典型探测器效应的添加方法。使用仿真图像来说明所提出方法的有效性,同时分析了该方法的优缺点。     

机电控制系统的仿真研究

在分析直流电机与曲柄摇杆机构数学模型的基础上,针对这类非线性、复杂系统的模型特点,提出了一种Matlab/simulink与m函数嵌套的建模方法,完成了直流电机—曲柄摇杆机构的simulink模型。为了获得稳定的曲柄转速,提出了基于CMAC（Cerebellar Model Articulation Controller小脑神经网络）与PID并行的控制算法。仿真结果表明,该建模方法可行,控制方法能有效地降低曲柄的速度波动。     

基于可编程图形加速硬件的实时光线投射算法

为了在保证绘制图像质量的基础上将体绘制算法的绘制速度提高至实时,提出一种基于可编程图形加速硬件(GPU)的光线投射算法实现(GRC,GPU-based Ray Casting)。GRC在可编程GPU中进行重采样和分类,使用矩阵逆运算以降低重采样坐标的计算复杂度,使用后分类技术以降低算法的空间复杂度。实验表明:对于2563规模的体数据,GRC能够在保证图像质量的基础,以超过30fps的速度进行绘制。     

基于神经网络的遥感影像超高分辨率目标识别

现有遥感图像的许多分类方法大都忽略了混合像元存在的事实,通过理解遥感影像像元点目标的空间分布特性,提出基于Hopfield神经网络的遥感图像超分辨率目标识别算法。在Hopfield神经网络模型下,利用模糊分类技术进行模糊分类,然后用分类结果约束Hopfield神经网络的方法获取超高分辨率的遥感图像,能够提高遥感图像的目标分辨率,使其目标特征信息更清晰。     

基于最短路的中枢辐射航线网络鲁棒优化方法

中枢辐射航线网络是充分体现规模经济的一种网络构形。航空公司构建适合自身发展的中枢辐射航线网络已变得越来越重要。本文针对成本和需求的不确定性，采用鲁棒优化的方法对中枢辐射航线网络进行规划设计，并将最短路算法加以改进提出了求解的精确算法。得到了可以适用于多种可能情景的鲁棒解。算例表明鲁棒优化方法具有很好的实用价值。     

Multi-agent cooperative intrusion response in mobile adhoc networks

The nature of adhoc networks makes them vulnerable to security attacks. Many security technologies such as intrusion prevention and intrusion detection are passive in response to intrusions in that their countermeasures are only to protect the networks, and there is no automated network-wide counteraction against detected intrusions. the architecture of cooperation intrusion response based multi-agent is propose. The architecture is composed of mobile agents. Monitor agent resides on every node and monitors its neighbor nodes. Decision agent collects information from monitor nodes and detects an intrusion by security policies. When an intruder is found in the architecture, the block agents will get to the neighbor nodes of the intruder and form the mobile firewall to isolate the intruder. In the end, we evaluate it by simulation.     

INFORMATION CHARACTERIZATION OF COMMUNICATION CHANNELS FOR SYSTEM IDENTIFICATION

This paper studies identification of systems in which the system output is quantized, transmitted through a digital communication channel, and observed afterwards. The concept of the CR Ratio is introduced to characterize impact of communication channels on identification. The relationship between the CR Ratio and Shannon channel capacity is discussed. Identification algorithms are further developed when the channel error probability is unknown.     

单通道同频混合信号时延高效估计方法

针对单通道同频数字混合信号时延估计问题,提出了一种数据辅助的方法,将整个估计流程分成了基于数据辅助的时延粗估计与基于最大似然的时延精估计两个过程。该方法克服了以往基于最大似然同频混合信号时延估计的很多弊端,改进了搜索方式并探讨了消除时延模糊的方法,提高了估计精度。最后又分析了性能界,为本文方法的性能分析提供了理论依据。该方法较依赖于两路时延差,对频偏误差不敏感,仿真实验验证了该方法的有效性与实用性。     

Consistency analysis of accelerated degradation mechanism based on gray theory

A fundamental premise of an accelerated testing is that the failure mechanism under elevated and normal stress levels should remain the same. Thus, verification of the consistency of failure mechanisms is essential during an accelerated testing. A new consistency analysis method based on the gray theory is pro- posed for complex products. First of all, existing consistency ana- lysis methods are reviewed with a focus on the comparison of the differences among them. Then, the proposed consistency ana- lysis method is introduced. Two effective gray prediction models, gray dynamic model and new information and equal dimensional （NIED） model, are adapted in the proposed method. The process to determine the dimension of NIED model is also discussed, and a decision rule is expanded. Based on that, the procedure of ap- plying the new consistent analysis method is developed. Finally, a case study of the consistency analysis of a reliability enhancement testing is conducted to demonstrate and validate the proposed method.     

一种改进的PSO-MBCV算法的车底阴影分割

针对当前车底阴影分割算法在复杂环境下鲁棒性较差以及最大类间方差（maximum between class variance,　MBCV）多阈值分割算法不能自动确定阈值个数的问题,提出利用峰值自适应方法自动确定MBCV多阈值分割算法中阈值个数;然后,以阈值的个数为粒子群优化算法（particle swarm optimization,　PSO）中粒子的维数,提出了一种改进的PSO MBCV算法的车底阴影分割。实验结果表明,该算法能有较低的误分类误差,能有效地分割出车底阴影。