安徽省区域经济物流弹性研究

对安徽省1990—2011年的物流能力和GDP数据进行了统计分析和回归分析,建立了物流能力与时间、GDP之间的数学模型,进而对安徽省区域经济物流弹性进行分析。研究结果表明安徽省物流能力和区域经济发展之间存在互动关系,并对安徽省2012-2021年区域经济物流弹性进行了预测。基于分析的结论提出相关政策建议,对安徽省制定物流产业和经济发展规划提供参考。     

基于Adina软件的大型边坡变形与稳定性分析

边坡失稳是一种严重的地质灾害,在详细的地质调查、分析基础上,对枇杷园边坡的破坏模式进行分析,利用Adina软件对边坡进行有限元计算,分析边坡的应力分布,根据强度折减法理论,对边坡稳定性安全系数进行计算,研究成果表明,边坡可能沿软弱夹层滑动,对边坡采取以抗滑桩加固措施进行了有限元计算,验证加固方法的有效性。     

电感器的现状和发展趋势

简要介绍了插装式电感器和片式电感器的现状和特点及向小型化、高频化、高精度化和集成化的方向发展。     

地铁与国铁视频监控系统对比分析

本文主要从地铁及国铁视频监控系统的传输方式,系统硬件组成和系统的功能等方面分析了两者的不同点,为相关铁路的的设计提供了参考价值。     

Rayleigh分布参数的贝叶斯经验贝叶斯估计

文章在均方损失函数下研究了Rayleigh分布参数的贝叶斯经验贝叶斯估计问题;在b=1条件下,证明了其贝叶斯经验贝叶斯估计是几乎处处收敛于贝叶斯估计的,并且它是渐近最优的;最后,给出蒙特卡罗随机模拟试验验证了此贝叶斯经验贝叶斯估计的渐近最优性。     

从B~α空间到Q_p空间的一个积分型算子

设φ是单位圆盘D上的解析自映射,g∈H(D).利用符号函数φ和映射g的函数论性质,给出从Bα空间到Qp空间的积分型算子Cnφ,g的有界性和紧性的特征.     

Emerged fossil corals on the coast of northwestern Hainan Island, China: Implications for mid-Holocene sea level change and tectonic uplift

Fossil corals are widespread on the coast of northwestern Hainan Island, China. Most of these corals are exposed during low tide levels, indicating that a higher sea level may have existed during their life time. The radiocarbon data introduced by this paper in combination with those from other sources show that the corals were alive mainly during the midto late-Holocene. Mid-Holocene sea levels 1-3 m higher than the present level were confirmed for adjacent coasts; however, the emerged corals on the investigated coast are not necessarily indicators of a higher eustatic sea level. They do predict relative sea levels of 1.5-3.4 m when using 1 m below the tidal datum as the upper limit of coral growth. However, using the Mean Lower Low Water as the coral’s upper growth limit, the relative sea level on the non-volcanic coast was almost as high as the present level, whereas that on the volcanic coast was 0.4-2.0 m higher than present. Therefore, the exposure of these dead coral heads and their discrepancy in elevation may be the result of tectonic uplift caused by volcanic activities. From these results, the highest sea level of upward coral growth must be defined first when using fossil corals to reconstruct past sea levels. Meanwhile, vertical tectonics have to be taken into account as a significant factor when conducting high-resolution sea level reconstruction, although the South China coast is located in a "tectonically stable" region.     

Optical turbulence profiling with single star SCIDAR technique

In order to characterize optical turbulence, we have developed a single star SCIDAR （SSS） for measurement of the distribution of Cn^2 with height. The SSS consists of a 40 cm telescope and a CCD camera for fast sampling of stellar scintillation pattern. Spatio- temporal auto and cross-correlation functions of the single star images are computed, providing vertical profiles of optical turbulence intensity C2（h） and wind speed V（h）. Using this new SSS experiment, profiles of turbulence can be obtained from the ground to the top of atmosphere, allowing the determination of seeing, isoplanatic angle and coherence time. Detailed characteristics of atmospheric optical turbulence are important for active and passive imaging, astronomical site testing, adaptive optics, laser communications, target tracking and designation, and laser beam control. We plan to improve the robotization of the SSS to be able to use it routinely even under harsh weather and altitude conditions that we expect to encounter on the high Tibetan plateau or at Dome A in Antarctica. SSS will also be applied for the site testing campaign of the future Chinese extremely large telescope.     

Dehydration melting of UHP eclogite and paragneiss in the Dabie orogen: Evidence from laboratory experiment to natural observation

Dehydration melting of subducted continental crust is significant during exhumation, and its study from both experimental and petrological observations is of great importance to our understanding of continental geodynamics. Dehydration melting experi- ments were carried out on ultrahigh-pressure （UHP） eclogite from Bixiling in the Dabie orogen using a piston cylinder at 1.5-3.0 GPa and 800-950℃ to investigate partial melting of eclogite induced by phengite breakdown. The phengite-bearing eclogite started to melt at T≤800-850℃ and P=1.5-2.0 GPa and produced about 3% granitic melt. The products of dehydration melting vary with temperature and pressure. Such results provide valuable constraints on the micro-texture related to partial melting of UHP rocks in the Dabie-Sulu orogenic belt. Three types of polyphase inclusions were identified in garnet from the Shuanghe UHP eclogite. K-feldspar and quartz inclusions are interpreted to represent the products of segregation and crystallization of minor amounts of melt that formed during dehydration melting of phengite by the inferred reaction Phengite＋Omphacite＋Quartz Amphibole_＋Garnet＋Melt （K-feldspar＋Quartz＋Plagioclase）. Polyphase inclusions of phengite and K-feldspar＋Quartz inclusions were also found in zoisite/clinozoisite and garnet from the Shuanghe garnet-bearing paragneiss. These polyphase inclusions pro- vide evidence for a continuous process from sub-solidus dehydration to partial melting within the UHP gneissic rocks. The com- positional variation of garnets demonstrates that breakdown of epidote-group minerals may have played a crucial role during de- hydration melting reaction of phengite. The Ti-in-zircon thermometry and Si content of phengite in zircon suggest that partial melting would occur at 783-839℃ and 2.0-2.5 GPa. Therefore, both experimental results and petrological observations indicate that dehydration melting and fluid activity within the Dabie UHP rocks at micro-scale are controlled by the breakdown of phengite.     

有序含氮介孔碳对金属离子的吸附性能

以SBA-15为硬模板,吡咯为含氮碳源,通过硬模板法合成了有序含氮介孔碳(NMC).该材料具有高度有序开放的介孔结构,比表面积和孔容分别为647m2/g和0.8cm3/g,最可几孔径为3.5nm,碳氮比为11.3,其表面具有多种含孤对电子或带正、负电子的官能团,且具有良好的热稳定性.对Cu(Ⅱ)、Zn(Ⅱ)、Ni(Ⅱ)、Cr(Ⅵ)和Mn(Ⅶ)等离子的吸附研究表明:在50ml/L稀溶液中,该材料对各金属离子的平衡吸附量依次为Cu(Ⅱ)>Cr(Ⅵ)>>Ni(Ⅱ)～Zn(Ⅱ)>>Mn(Ⅶ),对Cu(Ⅱ)离子表现出选择性吸附,溶液中98%以上Cu(Ⅱ)离子可被吸附.NMC对Cu(Ⅱ)、Cr(Ⅵ)离子的吸附行为遵循Langmuir等温吸附方程,且有高饱和吸附容量,分别高达120.7mg/g和322.6mg/g,为有序介孔碳(CMK-3)的1.4和2.1倍.该材料循环使用3次后,依然保持很好的吸附性能.