High-precision timing of the Quaternary standard samples with thermal ionization mass spectrometry (TIMS) U-series method

Two national stalagmite standard (GBW04412, GBW04413) and one international coral standard (RKM_4) have been determined by using thermal ionization mass spectrometry (TIMS) method. The values of ( 234 U/ 238 U) act , ( 230 Th/ 234 U) act and age are all consistent in error range with the standard values obtained by using α spectrometry.     

Preparation and optical properties of solid solution semiconductor (Zn x Cd1−x S) doped silica glasses

Semiconductor(Zn_xCd_1−x S) doped silica glasses were prepared by Sol-Gel process andin situ growth technique. The structure of the materials was characterized by X-ray diffraction technique, the particle size of semiconductor crystallites from X-ray patterns was estimated less than 10 nm. From absorption spectra, it is obtained that the absorption edges shifted to short wavelength direction when Zn contents increased, and the absorption edge can be adjusted from 2.46 eV to 2.96 eV by controlling Zn contents. The third-order nonlinear optical susceptibility was studied at 532 nm with 8 ns pulse laser by degenerate four wave mixing (DFWM) technique.     

Preliminary study on climatic signals of stable isotopes from Holocene speleothems under monsoon condition

Within the East Asian monsoon zone the change in oxygen isotope of Holocene stalagmite is mainly related to monsoon rain rather than to temperature. And carbon isotope can be taken as a comprehensive signal which contains the natural information and the information of anthropogenic activity. Isotopic analysis is also compared with the annual layer records.     

酚醛树脂泡沫材料的填充改性及其性能研究

用氢氧化铝粉末对泡沫酚醛树脂材料进行填充改性,并对其主要性能进行研究．结果表明,填充改性能提高酚醛泡沫材料的抗压强度,其导热系数随温度和密度的升高而增大,泡沫材料在深冷情况下表现出优异的绝热性能．同时对酚醛泡沫材料的燃烧性能进行了考察,其临界氧指数高达４７,在高于１５０℃环境温度中有自燃的危险,１５０℃以下可安全使用．     

瓶盖加工模具的失效分析

对瓶盖加工模具在生产使用中突然出现的裂纹及崩刃等现象进行了分析,指出失效的主要原因是原热处理工艺不当使其硬度偏高所致．鉴于此,本文对其进行了实验研究,并制定了新工艺．     

X2105柴油机连杆轴承故障的理论分析和振动实验研究

通过计算和试验分析了利用测量发动机连杆轴承处缸体振动来研究连杆轴承因间隙而引起的振动特性．从而由发动机缸体表面振动特性判定发动机连杆轴承的故障．     

链条锅炉模糊控制研究

针对链条锅炉的运行特点,提出一套基于模糊控制理论的链条锅炉控制方案。链条锅炉滞后时间长、惯性大,采用传统控制方法控制效果不理想,但采用模糊控制方法可以取得良好的控制效果。本控制系统由负荷控制和燃烧控制子系统构成。控制系统通过调节供入的燃料量和合理组织炉内燃烧,提高了锅炉的运行效率。针对不同的调节对象,分别设计了不同的模糊控制器,改善了控制系统的整体控制效果。该系统已经成功地应用于北京市德宝锅炉房。     

电站凝汽器汽相流动与传热特性的准三维数值分析

为了研究凝汽器流动与传热特性沿轴向的变化,文中发展出一个凝汽器汽相流动与传热特性的准三维数值计算方法,应用该方法对一大型凝汽器汽相流动与传热特性进行了数值模拟．计算结果表明,单流程凝汽器冷却水温度沿流向的变化对蒸汽流动与传热的三维特性会产生明显的影响．