厌氧-好氧周期循环条件下厌氧磷吸收现象

在厌氧-好氧周期循环反应器中，稳定运行阶段出现规律性的与生物除磷理论相悖的厌氧磷酸盐吸收现象．为此，从厌氧吸收磷、有机物的效果及两者之间的关系、厌氧有机物吸收能量来源等角度，对厌氧吸磷机理进行探讨．采用乙酸钠为主要有机基质，当进水P／COD从2／100增加到4／100，厌氧阶段磷酸盐的去除率一直稳定在50％-70％．在排除化学除磷的情况下，实验结果表明厌氧吸磷与厌氧吸收乙酸盐基质直接相关，而糖原又是有机基质吸收与胞内聚合物储存过程重要的甚至唯一的能量来源．通过对厌氧磷酸盐、有机物、糖原以及混合液中pH值变化的测定分析，初步推测厌氧吸收磷酸盐是当胞内无可利用的磷源时，糖原分解对磷酸盐的需求，并通过敏感于pH值变化的磷载体蛋白，将胞外液相中的无机磷酸盐运输到细胞内部。     

食饵-捕食系统最优化开发研究

给出了几种开发食饵-捕食系统的方案,以及与之相对应的方程.得出了在非密度制约条件下,不同捕获方案的最大收益值,并做出了相关生态解释.通过对不同捕获方案的比较,得到了获取最大收益时的充分条件,最后运用M atlab对结论进行了数值模拟.     

多维动态模糊数据的分解模型研究

对多维数据的研究最大困难在于其数据量十分庞大,数据规模的单纯扩大,往往导致系统的复杂性成倍增加,而且在研究中发现,存在着大量具有“多维性”、“动态性”和“模糊性”的数据.对此,该文基于动态模糊理论,提出了多维动态模糊数据的分解模型,该模型的建立,为人们用计算机处理这类问题提供了理论依据.     

Mapping of the rice （Oryza sativa L.） thermo-sensitive genic male sterile gene tms5 with EST and SSR markers

VELOPING“TWO-LINE”HYBRID RICE.THE POLLEN FERTILITY OF TGMS IS REGULATED BY THE TEMPERATURE OF ENVIRONMENT.THE POLLENS OF TGMS LINES ARE STERILE WHEN THE ENVI-RONMENT TEMPERATURE IS ABOVE A CRITICAL POINT,BUT FERTILE BELOW THIS POINT.SO FAR,A NUMBER OF T…     

Thermal conductivity measurement of InGaAs/InGaAsP superlattice thin films

The thermal conductivities of InGaAs/ InGaAsP superlattices with different period lengths were measured from 100 to 320 K using 3ω method. In this temperature range, the thermal conductivities were found to decrease with an increase in temperature. For the period length-dependant thermal conductivity, the minimum value does exist at a certain period length, which demonstrates that at a short period length, superlattice thermal conductivity increases with a decrease in the period length. When the period is longer than a certain period length, the interface thermal resistance dominates in phonon transport. The experimental and theoretical results confirmed the previous predictions from the lattice dynamics analysis, i.e. with the increase in period length, the dominant mechanisms of phonon transport in superlattices will shift from wave mode to particle mode. This is crucial for the cutoff of the phonons and lays a sound foundation for the design of superlattice structures.     

江苏盐城沿海滩涂发展生态旅游的初步研究

通过分析江苏盐城沿海滩涂的自然概况、旅游发展现状和存在的问题,认为该区域发展生态旅游应遵循可持续发展的观点,不仅应保护自然环境,还应保护社会环境和经济环境.提出了该地区应侧重发展科考旅游、田园风光旅游、动物观赏旅游和休闲度假旅游,并对生态旅游项目、旅游线路规划、环境保护对策进行了设计.     

太平沟大桥曲线箱梁顶推施工设计概述

太平沟大桥该桥全长358．8m，平面位于R=1380．965m圆曲线及L5=300m的缓和曲线上，是国内曲线连续顶推桥长最长、跨径最大的一座桥。详细介绍了太平沟大桥曲线箱梁顶推设计特点及施工设计要点。     

机械合金化工艺对Fe-Ni合金显微结构的影响

对机械合金化制备的Fe-Ni粉体利用X射线衍射(XRD)进行分析，得到了不同Ni含量和不同球磨时间Fe-Ni纳米晶的XRD谱．实验表明，w(Ni)=10％和20％时，Ni溶入Fe晶格，分别在球磨20h和50h后形成单一的a(bcc)相；w(Ni)=50％时，其先后经历了γ(fcc)→←a(bcc)正逆转变，在球磨120h后最终形成单一γ(fcc)相．无论是a(bcc)相还是γ(fcc)相．它们的固溶度均比块体Fe-Ni合金显著提高．w(Ni)=35％时，则始终是两相共存．对试样的XRD谱采用3种不同的方法测定了Fe-Ni粉体的晶粒尺寸和显微畸变，发现经球磨20h后，不同Ni含量的粉体均呈纳米结构，并随球磨时间延长，Fe-Ni纳米晶的晶粒尺寸下降而显微畸变上升．     

A Theoretical Approach for Estimating Fracture Toughness of Ductile Metals

Fracture toughness is very important when applying Damage Tolerance Design and Assessment Techniques. The traditional testing approach for obtaining fracture toughness values is costly and time consuming. In order to estimate the fracture toughness of ductile metals, the fracture mechanics theory, materials plastic deformation theory and materials constructive relationships are employed here. A series of formulae and a theoretical approach are presented to calculate fracture toughness values of different materials in the plane stress and plane strain conditions. Compared with test results, evaluated values have a good agreement.     

Effect of particle size distribution on the microstructure,texture,and mechanical properties of Al–Mg–Si–Cu alloy

The effect of particle size distribution on the microstructure,texture,and mechanical properties of Al–Mg–Si–Cu alloy was investigated on the basis of the mechanical properties,microstructure,and texture of the alloy.The results show that the particle size distribution influences the microstructure and the final mechanical properties but only slightly influences the recrystallization texture.After the pre-aging treatment and natural aging treatment(T4 P treatment),in contrast to the sheet with a uniform particle size distribution,the sheet with a bimodal particle size distribution of large constituent particles and small dispersoids exhibits higher strength and a somewhat lower plastic strain ratio(r) and strain hardening exponent(n).After solution treatment,the sheet with a bimodal particle size distribution of large constituent particles and small dispersoids possesses a finer and slightly elongated grain structure compared with the sheet with a uniform particle size distribution.Additionally,they possess almost identical weak recrystallization textures,and their textures are dominated by CubeND {001}310 and P {011}122 orientations.