Nanoindentation response analysis of TiN-Cu coating deposited by magnetron sputtering

To investigate the change of the mechanical properties of soft metals doped PVD(Physical Vapor Deposition)coatings after the migration of soft metal to the surface, TiN-Cu coating was deposited on Si(100) by magnetron sputtering. The microstructure and mechanical properties at room temperature and after vacuum heat treatment at 300 ℃ were investigated. The results showed that the grains were clustered and the microstructure was porous for TiN-Cu coating at room temperature, while many micro-and nano-sized Cu particles were observed on the surface after vacuum heat treatment at 300 ℃. The elastic properties of the TiN-Cu coating after vacuum heat treatment at 300℃ degraded compared with that at room temperature. The hardness and elasticity modulus of TiN-Cu coating kept constant(3.7 GPa and 125.0 GPa, respectively) with the increase of nano-indentation depth, while the hardness and elasticity modulus of TiN-Cu coating after vacuum heat treatment at 300 ℃ increased gradually.     

Influence of minor boron on the microstructures of a second generation Nibased single crystal superalloy

Boron is added into single crystal superalloys as a micro-alloying element to strengthen low angle grain boundaries.However,systematic investigations on the effect of boron on microstructures of single crystal superalloys are limitedly reported.The effect of boron on as-cast and heat-treated microstructures was investigated in two experimental Ni-based single crystal superalloys containing 3 wt% Re.The current results indicated that the volume fraction of(γ+γ′)eutectic and M_3B_2 borides was evidently increased,while the number of micropores was evidently decreased with the addition of 0.02 wt% boron.The(γ+γ′)eutectic could not be dissolved completely due to the lower incipient melting temperature caused by the formation of M_3B_2 borides.Meanwhile,the M_3B_2 borides were found to be enriched with indispensable strengthening elements Cr,Mo,W and Re,and this may lower the strengthening effect and cause stress concentration during high temperature creep.     

Study on the hydrogen storage property of (TiZr0.1)xCr1.7-yFeyMn0.3 (1.05

Jigang Li  Li Xu  Xiaojing Jiang  Xingguo Li 《自然科学进展(英文版)》2018,28(4):470-477

Novel multiferroicity in orthorhombic SmCrO3

This paper reports the ferroelectricity in antiferromagnetic SmCrO_3 with a reasonably large value of spontaneous electric polarization(70μC/cm~2mC cm~(-2)at 50 K)based on the measurement of pyroelectric current.The experimental results showed that the temperature of the onset of polar order was evidently higher(about220 K)than the Neel temperature(T_N=197 K)in the magnetodielectric studies.The calculated magnetodielectric effect(MDE)value was explicitly negative with maximum|MDE|values of about 3.6%around 230 K.The absence of a convincing signature in MDE at antiferromagnetic ordering temperature T_Nindicated the absence of magnetoelectric coupling around this temperature regime.The results further confirmed that the onset of polar order can be attributed to the structural distortion,rather than the canted noncollinear magnetic structure.     

Coupling effects of tungsten and molybdenum on microstructure and stressrupture properties of a nickel-base cast superalloy

In order to comprehensively understand the forming mechanism of abnormal phases solidified in a nickel-base cast superalloy with additives of tungsten and molybdenum, the coupling effects of W and Mo on the microstructure and stress-rupture properties were investigated in this paper. The results indicated that the precipitation of primary α-(W, Mo) phase depended tremendously on the amount of W and Mo addition. When the total amount of W and Mo was greater than 5.79 at%, α-(W, Mo) phase became easily precipitated in the alloy.With increasing of Mo/W ratio, the dendrite-like α-(W, Mo) phases were apt to convert into small bars or blockylike phases at the vicinities of γ′/γ eutectic. The morphological changes of α-(W, Mo) phase can be interpreted as the non-equilibrium solidification of W and Mo in the alloy. Since the large sized α-(W, Mo) phase has detrimental effects on stress-rupture properties in as-cast conditions, secondary cracks may mainly initiate at and then propagate along the interfaces of brittle phases and soft matrix. During exposing at 1100 ℃ for 1000 h, the α-(W, Mo) phases transformed gradually into bigger and harder M_6C carbide, which results in decreasing of stress-rupture properties of the alloy. Finally, the alloy with an addition of 14W-1Mo(wt%) maintained the longest stress lives at high temperatures and therefore it revealed the best microstructure stability after 1100 ℃/1000 h thermal exposure.     

氮素形态配比对镉污染下小白菜生长及碳氮积累的影响

以小白菜为材料,设置4个镉(Cd)浓度水平以及3个氮素形态配比,分析镉-氮相互作用对小白菜生长及碳氮代谢相关指标的影响,结果表明:Cd的物质的量浓度为5μmol·L~(-1)时,对小白菜地上部分鲜重、总氮含量影响不显著;当Cd的物质的量浓度为50、100μmol·L~(-1)时,小白菜鲜重和总氮含量显著降低.无论是否添加Cd,硝铵比3/7处理的小白菜鲜重显著低于硝铵比10/0(全硝)和硝铵比7/3处理;100μmol L~(-1)Cd处理时小白菜地上硝酸盐的含量显著低于对照组,其余处理与对照差异不显著;不同Cd浓度处理均降低了小白菜的游离氨基酸含量,提高了其可溶性蛋白质含量.相对于全硝处理,以硝铵比7/3为氮源可提高50μmol·L~(-1)Cd处理时小白菜的总氮含量、游离氨基酸含量及100μmol·L~(-1)Cd处理的小白菜地上部分硝态氮含量.当以全硝及硝铵比7/3为氮源时,小白菜地上部分总碳含量随Cd浓度的增加而增加,而可溶性糖含量仅在100μmol·L~(-1)Cd处理时显著高于无镉对照组.小白菜地上部分总Cd含量随Cd处理浓度的增加而增加,但在全硝和硝铵比7/3处理间差异不显著.综上,不同硝铵比影响镉胁迫下小白菜的生长和碳氮积累,适宜硝铵配比有助于提高小白菜对镉的耐受性.     

何作霖先生最早发现莱芜铁矿是接触变质矿床——读《山东博山莱芜间地质矿产》有感

1949年8月,何作霖受山东省政府工矿部的邀请,在博山莱芜间进行地质调查,查明莱芜有三处铁矿。尤其是莱芜矿山地区的接触变质磁铁矿的发现,为以后寻找和勘探莱芜铁矿提供了可靠线索及依据。同时何作霖还预测了莱芜与吐丝口间煤田的存在。     

区域创新方法应用推广体系建设研究——以宁夏为例

创新方法应用推广体系建设是创新方法工作开展的基础,文章总结了创新方法工作的总体要求,分析了创新方法应用推广体系建设的目标与要求,以宁夏为例提出了从组织管理、工作推进、推广服务、培训、专家咨询、宣传传播、政策保障、对外交流合作等体系建设方面如何构建区域创新方法应用推广体系,并详细阐述了各体系的构成与内容,为各省区创新方法工作的深入开展提供参考和支撑。     

Ground demonstration system based on in-orbit assembly oriented manipulator flexible force control

To eliminate the load weight limit of carrier rockets and reduce the burden on support struc-tures,in-orbit assembly is a key technology to make design of scattering a large diameter telescope into submirror modules, which requires smooth operation of assembly robots, and flexible force con-trol technology is necessary.A ground demonstration system is presented for in-orbit assembly focu-sing on flexible force control.A six-dimensional force/torque sensor and its data acquisition system are used to compensate for gravity.For translation and rotation, an algorithm for flexible control is proposed.A ground transportation demonstration verifies accuracy and smoothness of flexible force control, and the transportation and assembly task is completed automatically.The proposed system is suitable for the development of in-orbit assembly robots.     

基于数值积分与功率损耗测试的冷轧电机功率模型

为提高冷轧电机功率的计算精度,提出了一种新型的电机功率在线计算模型,模型中将电机功率分为轧制功率和机械功率损耗.其中,轧制功率采用基于简易有限元的数值积分方法计算获得,而电机机械功率损耗采用实验测试回归方法获得.基于本文设计的测试方案和模型结构,通过对某1 450 mm五机架冷连轧机组的现场测试,回归得到了功率损耗模型中的系数,并将其应用到了该机组中.现场实际应用表明该电机功率模型的计算偏差可控制在±5%以内,证明该模型具有较高的计算精度,符合现场控制要求,具有广泛的应用前景.