Microstructural characterization and oxidation resistance of multicomponent equiatomic CoCrCuFeNi-TiO high-entropy alloy

CoCrCuFeNi-TiO was prepared by arc melting of the pure elements and Ti₂CO powder under an Ar atmosphere. Both CoCrCuFeNi and CoCrCuFeNi-TiO alloys are composed of a face-centered cubic (fcc) solid solution, whereas the alloys of CoCrCuFeNi-TiO are basically composed of an fcc solid solution and TiO crystals. The microstructures of CoCrCuFeNi-TiO are identified as dendrite and interdendrite structures such as CoCrCuFeNi. The morphology of TiO is identified as an equiaxed crystal with a small amount of added Ti₂CO. By increasing the amount of Ti₂CO added, the TiO content was dramatically increased and part of the equiaxed crystals changed to a dendrite structure. A test of the oxidation resistance demonstrates that the oxidation resistance of CoCrCuFeNi-TiO is better than that of CoCrCuFeNi. However, as the TiO content increases further, a corresponding decrease is observed in the oxidation resistance.     

Effect of melting temperature on microstructural evolutions,behavior and corrosion morphology of Hadfield austenitic manganese steel in the casting process

In this study, the effect of melting temperature on the microstructural evolutions, behavior, and corrosion morphology of Hadfield steel in the casting process is investigated. The mold was prepared by the sodium silicate/CO₂ method, using a blind riser, and then the desired molten steel was obtained using a coreless induction furnace. The casting was performed at melting temperatures of 1350, 1400, 1450, and 1500℃, and the cast blocks were immediately quenched in water. Optical microscopy was used to analyze the microstructure, and scanning electron microscopy (SEM) and X-ray diffractrometry (XRD) were used to analyze the corrosion morphology and phase formation in the microstructure, respectively. The corrosion behavior of the samples was analyzed using a potentiodynamic polarization test and electrochemical impedance spectroscopy (EIS) in 3.5wt% NaCl. The optical microscopy observations and XRD patterns show that the increase in melting temperature led to a decrease of carbides and an increase in the austenite grain size in the Hadfield steel microstructure. The corrosion tests results show that with increasing melting temperature in the casting process, Hadfield steel shows a higher corrosion resistance. The SEM images of the corrosion morphologies show that the reduction of melting temperature in the Hadfield steel casting process induced micro-galvanic corrosion conditions.     

Mineral-phase evolution and sintering behavior of MO-SiO2-Al2O3-B2O3 (M=Ca,Ba) glass-ceramics by low-temperature liquid-phase sintering

In this work, network former SiO₂ and network intermediate Al₂O₃ were introduced into typical low-melting binary compositions CaO·B₂O₃, CaO·2B₂O₃, and BaO·B₂O₃ via an aqueous solid-state suspension milling route. Accordingly, multiple-phase aluminosilicate glass-ceramics were directly obtained via liquid-phase sintering at temperatures below 950℃. On the basis of liquid-phase sintering theory, mineral-phase evolutions and glass-phase formations were systematically investigated in a wide MO-SiO₂-Al₂O₃-B₂O₃ (M=Ca, Ba) composition range. The results indicate that major mineral phases of the aluminosilicate glass-ceramics are Al₂₀B₄O₃₆, CaAl₂Si₂O₈, and BaAl₂Si₂O₈ and that the glass-ceramic materials are characterized by dense microstructures and excellent dielectric properties.     

Primary Sn-rich titianite in the Qitianling granite, Hunan Province, southern China: An important type of tin-bearing mineral and its implications for tin exploration

The Qitianling calc-alkaline granite in Hunan Province (South China) has attracted much attention since the discovery of the Furong super-large tin deposit. The present study provides new mineralogical data to address their implications for exploration of tin deposits. In the Taoxiwo granite in the southeastern part of the Qitianling granite body, Sn-rich titanite was identified as an important type of Sn-bearing mineral. The titanite commonly occurs with biotite as euhedral crystals, exhibiting typical envelope-like shape and sector-zoning texture. These indicate that the titanite most likely crystallized in the magmatic stage. Electron-microprobe analyses show that the titanite is enriched in tin up to 1.12 wt% SnO₂, with an average of 0.43 wt%. With the crystallization of the granite, primary minerals undertook hydrothermal alteration by magma-derived fluids. Subsequently, in the hydrothermal stage, the primary Sn-bearing titanite was altered (at least partially), but still preserved its typical envelope-shaped outline. Micro-scale cassiterite is a representative product of such alteration; other secondary minerals include fluorite, ilmenite, Sn-bearing rutile and quartz. Therefore, the titanite, commonly present in the calcalkaline granites, can be treated as an important Sn-carrying mineral in the Qitianling granite, reflecting the primary magmatic environment with tin enrichment. The hydrothermal alteration of the primary titanite and subsequent crystallization of cassiterite recorded a process of leaching and accumulation of tin in magmatic-hydrothermal evolution of the Sn-bearing granite. Thus, this titanite has important implications for tin exploration. Supported by National Natural Science Foundation of China (Grant Nos. 40730423 and 40221301) and Project of China Geological Survey (Grant No. 1212010632100)     

砂土的形变能破坏准则

本文基于国内外有关中主应力对砂土抗剪强度影响的模型，讨论了中主应力对砂土抗剪强度的影响机理，导出了以形变能破坏准则为基础，适用于复杂应力条件的强度指标计算公式，较好地考虑了砂性土在三轴压缩与三轴拉伸条件下强度指标的差异和中主应力对强度指标的放大效应。本文公式在考虑粘结应力的情况下，也可推广到对粘性土强度变化的研究。     

Variable diffusion boundary layer and diffusion flux at sediment-water interface in response to dynamic forcing over an intertidal mudflat

The diffusion boundary layer (DBL) significantly limits the exchange between sediment and overlying water and therefore becomes a bottleneck of diffusive vertical flux at the sediment-water interface (SWI). Variable DBL thickness and diffusion flux in response to dynamic forcing may influence replenishment of nutrients and secondary pollution in coastal waters. In situ measurements of velocity in the bottom boundary layer (BBL) and oxygen concentration in the DBL were made over an intertidal mudflat, using an acoustic Doppler current and mini profiler. A linear distributed zone in the oxygen profile, the profile slope discontinuity and variance of concentration can be used to derive accurate DBL thickness. Diffusion fluxes calculated from the water column and sediment are identical, and their bias is less than 6%. A numerical model PROFILE is used to simulate the in situ dissolved oxygen profile, and layered dissolved oxygen consumption rates in the sediment are calculated. The DBL thickness (0.10-0.35 mm) and diffusion flux (15.4-53.6 mmol m 2 d 1) vary with a factor of 3.5 during a tidal period. Over an intertidal mudflat, DBL thickness is controlled by flow speed U in the BBL, according to δDBL=1686.1DU 1+0.1 (D is the molecular diffusion coefficient). That is, the DBL thickness δDBL increases with decreasing flow speed U. Changes of diffusion flux at the SWI are caused by variations in the water above the sediment and the turbulent mixing intensity. The diffusion flux is positively related to the turbulent dissipation rate, friction velocity and turbulent energy. Under the influence of dynamics in the BBL, DBL thickness and flux vary significantly.     

DEGDA／HPA厌氧胶配方的优化试验

本文介绍了以一缩二乙二醇丙烯酸双酯(简称一缩双酯,DEGDA)和丙烯酸β-羟丙酯(简称羟丙酯,HPA)为单体,以N,N-二甲基苯胺/糖精为促进剂/助促进剂或仅用三氯乙酸作促进剂来配制厌氧胶粘剂(厌氧胶)的优化配方试验.所得厌氧胶综合性能良好,通过优化试验结果得知的规律性认识有一定意义.     

Na0.5Bi0.5TiO3-BaTiO3无铅压电陶瓷制备及性能

研究了不同烧结制度下的NBBT6陶瓷的致密度、介电和压电性能.870℃左右预烧,可以得到致密且压电和介电性能较好的陶瓷(d33=107 pC/N.∈r=750,tanδ为3.23%).通过相应的粒度分析可知,提高预烧温度对粒度的影响不太大,但可用于湿法制备工艺中的原材料制备,解决湿法工艺中材料易被极性水分子解离而影响材料组分的问题.加入少量的BaTiO3到NBT中形成NBT-BT的固溶体,通过对压电介电性能及XRD的分析可知.当质量分数x=0.06时.(1-x)Na0.5Bi0.5TiO3-xBaTiO3晶体结构出现由三方相到四方相的转变,此时的性能达到最大值(d33=114 pC/N,∈r=1 173.tanδ为3.4%).     

一种利用域名系统支持主机移动的路由协议

当网络主机改变网络接入点时。传统的TEP／IP协议无法正常运作。这是由于IP地址的双重作用(既是主机的名也指明主机当前的网络位置)引起的，支持主机移动的网络协议SHMUD(Supporting Host Mobility Using DNS)用域名作为主机名。保留主机IP地址指示其当前网络位置的作用，解决了这一问题，SHMUD以域名服务系统作为它的位置目录，在每个移动主机可能访问的网络中安装移动代理，当移动主机从一个网络移动到另一个网络。并通过DHCP服务器获得了当地网络的一个IP地址后。向它的归属代理(Home Agent)发送登记请求，归属代理根据该移动主机的请求通知DNS服务器。DNS服务器就更新该移动主机的域名—地址映射。这样网络中其它主机利用域名与该移动主机通信时就可以直接将IP报发往该移动主机的当前IP地址了，在移动主机改变网络接入点的过程中，可能与其它主机正在进行通信。为保证通信不被中断(称为平滑越区)。SHMUD提出了一种新的机制以实现主机的平滑越区。此外，SHMUD还提供必要的安全措施使各个移动代理和DNS服务器不受网络攻击。最后，给出了SHMUD的原型系统和性能分析，与其它支持主机移动的路由方案如Mobile-IP相比，SHMUD实现了路径优化、资源的分布式管理、平滑越区以及身份验证等。此外，它只需要在移动主机可能访问的网络中安装移动代理，并在移动主机上安装必要的软件即可运行，不必进行大规模的软件升级，因此较适于在因特网中推广。     

Quantum storage of optical signals and coherent manipulation of quantum states based on electromagnetically induced transparency

Electromagnetically induced transparency (EIT) techniques are important tools for the storage of the quantum states of light fields in atomic ensembles and for enhancement of the interaction between photons. In this paper, we briefly summarize the recent experimental studies conducted by our group on enhanced cross-phase modulation based on double EIT effects, the quantum interference of stored dual-channel spin-wave excitations and the coherent manipulation of the spin wave vector for the polarization of photons in a single tripod atomic system. The work presented here has potential application in the developing field of quantum information processing.