实现船舶稳性的多油舱自适应调度算法及仿真

针对油舱对船舶浮态与稳性的影响，研究了保持船舶稳性的多油舱自适应调度控制算法，并用WinCC (Windows Control Center)组态软件编写了船舶自动浮态调整仿真系统。在系统架构上，采用布尔逻辑表构建了油舱、泵、管路之间的连通关系，并根据浮态方程计算出舱群之间的调驳油量，再根据多变量多约束的自适应优化调度算法实现了油舱驳油过程中浮态的平衡。仿真结果表明调度算法可以对船舶的浮态进行有效调整，并保持船舶稳性，避免了由油舱油量分布不均给船舶带来的不利影响，保障了航行安全。     

Effect of Zn addition on microstructure and mechanical properties of an Al–Mg–Si alloy

In the present work, an Al–0.66Mg–0.85Si–0.2Cu alloy with Zn addition was investigated by electron back scattering diffraction(EBSD), high resolution electron microscopy(HREM), tensile and Erichsen tests. The mechanical properties of the alloy after pre-aging met the standards of sheet forming. After paint baking, the yield strength of the alloy was improved apparently. GP(Ⅱ) zones and η’phases were formed during aging process due to Zn addition. With the precipitation of GP zones, β″ phases, GP(Ⅱ) zones and η’phases, the alloys displayed excellent mechanical properties.     

毛细现象液面形状特性分析

毛细管插入液面时,液体会由于表面张力作用而上升,这就是毛细现象.大多数学者在计算毛细现象中液面上升高度时,直接假定液面为球帽型,计算液柱重力势能时,将液体近似为圆柱体,忽略球帽的重力势能.本文严格计算了液面的形状,发现当液面较窄时(小于液面上升高度),这种近似是合理的.但液面较宽时,近似计算结果与实际情况偏离较大.本文在特殊情况下验证了描述液面接触角的杨氏方程的正确性.     

X80级管线钢的开发研究

根据X80级管线钢技术要求,对湘潭钢铁(集团)有限公司试制X80级管线钢进行成分设计、相变规律和再结晶规律研究,开发出了1 016×22.0 mm X80级热轧钢板.检验结果表明,各项性能指标均满足技术要求.     

两参数Markov过程的Sharp Markov性

证明了两参数Markov过程仅在正位矩形的有限并或可列并区域上才具有Sharp Markov性.     

Atomic layer deposition on Pd nanocrystals for forming Pd-TiO2 interface toward enhanced CO oxidation

Pd typically exhibits relatively low catalytic activity in CO oxidation, as CO is apt to be adsorbed on Pd to poison the surface for O2 activation. In this Letter, we report that this limitation can be overcome by integrating Pd with TiO2. The TiO2 was coated on Pd nanocubes with a controllable thickness using atomic layer deposition (ALD) method. Given the different work functions of TiO2 and Pd, the electrons in TiO2 semiconductor will flow toward Pd. With the electron density increased on Pd, the adsorption of CO to Pd will be weakened while the oxygen activation can be facilitated. Meanwhile, the interface-confined sites at Pd-TiO2 may further enhance the oxygen activation. As the species adsorption and activation are strongly correlated with electron density, the performance of Pd-TiO2 in CO oxidation turns out to depend on the TiO2 thickness, which determines the number of transferred electrons, within a certain range (<1.8 nm). This work provides a new strategy for enhancing catalytic performance through tailoring charge densities in hybrid catalysts.     

基于霍尔三维模型的雾霾治理对策研究

运用霍尔三维结构的基本理论,构建雾霾治理对策的三维结构模型。从时间维、逻辑维和知识维对雾霾的治理对策进行划分,构建"三元主体"模型,探讨政府、企业和个人三大主体在雾霾治理各个阶段中的相互作用,对推动雾霾治理研究具有重要的指导作用。     

B2O3对高铝钢连铸保护渣理化性能的影响

高铝钢连铸过程中,为了避免或减轻钢液中Al与保护渣中SiO2发生反应,设计了低SiO2、高Al2O3含量的高铝钢连铸保护渣,通过添加适量的酸性氧化物B2O3协调熔渣酸碱性,利用实验分析了B2O3含量对高铝钢保护渣熔融特性、黏度特性及渣膜传热特性的影响。结果表明,B2O3含量在4%～10%时,随着B2O3含量增加,保护渣熔化温度、黏度、黏流活化能均降低,渣膜热流密度增加;保护渣的等温转变曲线(TTT曲线)向孕育时间增加的方向移动,晶体生长速率降低;实验条件下,增加B2O3含量可抑制保护渣中CaF2的析出。     

基于扩散模型的ZnO/p-Si异质结伏安特性研究

为了揭示ZnO/p-Si异质结的导电机理,基于p-n结扩散模型和Anderson扩散模型推导了ZnO/p-Si异质结在理想情况下的伏安特性,并分析了掺杂浓度、工作温度以及能带补偿的影响.结果表明:当正向偏压超过势垒高度时,界面两边多数载流子由耗尽变为堆积,形成反向势垒,对异质结的正向电流起阻碍作用;当外加正向电压等于内...     

高取代度CMC取代度的紫外光谱法快速测定

研究了高取代度的羧甲基纤维素(CMC)取代度的紫外光谱测定方法.首先利用CMC与Cu(Ⅱ)反应,得到CMC-Cu(Ⅱ)溶液的紫外吸光值随稀硫酸铜溶液体积的变化曲线,发现该曲线可划分为3个区,其中Ⅰ区是CMC链上的羧基与Cu(Ⅱ)离子按照化学计量反应生成配合物的区域,且符合Lambert-Beer定律.将Ⅰ区曲线拟合得到...