一种超长短信拆分与合并方法

超长短信是影响短信业务使用感受的关键问题,本文对超长短信的基本原理进行分析,设计并实现了超长短信的发送和接收处理系统,通过超长短信进行自动的拆分和合并,实现用户透明的超长短信功能。     

Design and research of torque tube used in HTS motor

In order to improve the overall performance of high temperature superconducting （HTS） motor, a radial connection torque tube with high strength and low thermal leakage has been designed. Firstly, fiberglass epoxy composite is chosen as con- struction material. The structural size of the torque tube is obtained by means of load analysis and theoretical calculation. Secondly, thermal leakage of the torque tube is calculated with both theo- retical method and 3D finite-element analysis （FEA）. According to the result of the thermal analysis and mechanical loads, the struc- tural stresses of the torque tube are also obtained by FEA method. Lastly, a low temperature test platform is developed to verify the strength and the thermal leakage of the torque tube. The results show that the maximal shear stress of the torque tube is 24.3 MPa and thermal leakage of torque tube is 10.5 W, which satisfy the design requirements of the HTS motor. The torque tube also works in good condition at full-power and full-torque testing of the motor. The design method is also applicable for other similar design of torque tube in other applications.     

On nonsingularity and group inverse of linear combinations of generalized and hypergeneralized projectors

In this paper, some conditions for the nonsingularity and group inverses of linear combinations of generalized and hypergeneralized projectors are established. Moreover, some formulae for the inverses and group inverses of them are derived. The work of this paper extends some previous results.     

An Integrated Workflow for Proteome-Wide Off-Target Identification and Polypharmacology Drug Design

Polypharmacology,which focuses on designing drugs to target multiple receptors,has emerged as a new paradigm in drug discovery.To rationally design multi-target drugs,it is fundamental to understand protein-ligand interactions on a proteome scale.We have developed a Proteome-wide Off-target Pipeline （POP） that integrates ligand binding site analysis,protein-ligand docking,the statistical analysis of docking scores,and electrostatic potential calculations.The utility of POP is demonstrated by a case study,in which the molecular mechanism of anti-cancer effect of Nelfinavir is hypothesized.By combining structural proteome-wide off-target identification and systems biology,it is possible for us to correlate drug perturbations with clinical outcomes.     

Properties and Morphology of TiN Films Deposited by Atomic Layer Deposition

In this study,TiN films were deposited on SiO2 substrates by Atomic Layer Deposition(ALD) using TiCl4and NH3 as precursors. Properties and morphology of the TiN films were characterized by different methods.Using Grazing Incidence X-Ray Diffraction(GIXRD),TiN films demonstrated polycrystalline structure with(111)preferred orientation. Film thickness was measured by Spectroscopic Ellipsometry(SE) and a stable growth rate of 0.0178 nm/cycle was reached after 500 deposition cycles,which was consistent with the essence of ALD as a surface-saturated self-limiting reaction. Film resistivity measured by a four-point probe continuously decreased with increasing deposition cycles until it reached the minimum value of 300μΩ cm at 5000 deposition cycles with a thickness of 87.04 nm. The surface roughness and morphology of the TiN films at different deposition cycles ranging from 50 to 400 were analyzed by Atomic Force Microscopy(AFM). The AFM results indicated that the initial film growth follows the Stranski-Krastanov mode.     

瓦斯抽采终止条件最佳钻孔参数的确定

为得到更加精确的预测瓦斯的抽采时间及钻孔孔距,达到最佳抽采效果,采用大同煤矿集团轩岗5#煤层现场及实验室的数据,基于有限元理论,结合热力学与渗流力学,建立了瓦斯抽采的有限元模型.通过Ansys软件分析,并依据《煤矿瓦斯抽采达标暂行规定》确定了模拟控制条件,分析了钻孔间距与抽采瓦斯达标所需时间的关系,分析结果表明,当布孔间距为2 m时,抽采时间为105 d,满足生产接续要求.     

一类Euler函数方程的解的上界

设φ(n)为正整数n的Euler函数,讨论了Euler函数方程φ(x1…xn-1xn)=m(φ(x1)+…+φ(xn-1)+φ(xn))的求解问题,给出了该方程的所有正整数解的较为精确的上界.作为应用,对于一些给定的正整数m和n,求出了此时方程的全部正整数解.     

Kinetics of discontinuous precipitation in Cu–20Ni–20Mn alloy

The morphology and growth kinetics of discontinuous precipitation (DP) in a Cu–20Ni–20Mn alloy were investigated in the temperature range of 523–673 K by optical microscopy, scanning electron microscopy, and transmission electron microscopy. A lamellar mixed structure consisting of alternating lamellae of a matrix and NiMn phase was observed in DP colonies. The volume fraction of regions formed by a DP reaction was determined by quantitative metallographic measurements. The kinetics of DP was evaluated on the basis of the Johnson–Mehl–Avrami–Kolmogorov equation, which resulted in a time exponent of approximately 1.5. We confirmed that the nucleation of the discontinuous precipitate was confined to grain edges or boundaries at an early stage of the reaction. The activation energy of DP process was determined to be approximately (72.7 ±7.2) kJ/mol based on the Arrhenius equation; this result suggests that DP is controlled by grain boundary diffusion. The hardness values exhibited good correlation with the volume fraction of DP; this correlation was attributed to the presence of the ordered NiMn phase.     

Effects of Fe content on the microstructure and properties of CuNi10FeMn1 alloy tubes fabricated by HCCM horizontal continuous casting

Heating-cooling combined mold (HCCM) horizontal continuous casting technology developed by our research group was used to produce high axial columnar-grained CuNi10FeMn1 alloy tubes with different Fe contents. The effects of Fe content (1.08wt%–2.01wt%) on the microstructure, segregation, and flushing corrosion resistance in simulated flowing seawater as well as the mechanical properties of the alloy tubes were investigated. The results show that when the Fe content is increased from 1.08wt% to 2.01wt%, the segregation degree of Ni and Fe elements increases, and the segregation coefficient of Ni and Fe elements falls from 0.92 to 0.70 and from 0.92 to 0.63, respectively. With increasing Fe content, the corrosion rate of the alloy decreases initially and then increases. When the Fe content is 1.83wt%, the corrosion rate approaches the minimum and dense, less-defect corrosion films, which contain rich Ni and Fe elements, form on the surface of the alloy; these films effectively protect the α-matrix and reduce the corrosion rate. When the Fe content is increased from 1.08wt% to 2.01wt%, the tensile strength of the alloy tube increases from 204 MPa to 236 MPa, while the elongation to failure changes slightly about 46%, indicating the excellent workability of the CuNi10FeMn1 alloy tubes.