恩施州劳务输出效应分析

结合实际情况和数据资料,分析了恩施州人口与劳动力现状、农村劳动力输出的情况,研究结果显示:农村剩余劳动力转移与区域经济增长明显正相关,对农民人均收入和GDP增长发挥着重要作用.     

2.5 G ATM IP宽带测试接口的研制

实现了国内首例全面实现2．5G ATM／POS、GE、FE的宽带网络测试接口的研制．测试接口采用一种产生分析模块，支持多种接口模块，之间使用标准接口连接，主要发送和分析逻辑采用FPCA(Field Programmable Gate Array)实现，对外通讯接口是以太网口．采用实时操作系统，进行系统的初始化配置等以及与终端的通讯．系统集成度高，控制灵活，易于软件和逻辑升级．     

Research and Application of All-Position Automatic Welding Machine

The all-position automatic welding machine system is the special welding system for pipeline girth automatic welding on site, which has been widely used in the long distance pipeline construction projects due to the advantages of automatic control for welding parameters at all position, moving speed of bugs and operating. This automatic pipeline welding system has been successfully used in several main pipeline projects in China, and has been approved by the constructors with the benefits of higher quality passing rate, higher welding efficiency and lower labor intensity.     

Non-Monomial Permutations with Differential Uniformity Six

In this paper, a family of non-monomial permutations over the finite field \({F_{{2^n}}}\) with differential uniformity at most 6 is proposed, where n is a positive integer. The algebraic degree of these functions is also determined.     

An FE-Inexact Heterogeneous ADMM for Elliptic Optimal Control Problems with <Emphasis Type="Italic">L</Emphasis><Superscript>1</Superscript>-Control Cost

Elliptic PDE-constrained optimal control problems with L¹-control cost (L¹-EOCP) are considered. To solve L¹-EOCP, the primal-dual active set (PDAS) method, which is a special semismooth Newton (SSN) method, used to be a priority. However, in general solving Newton equations is expensive. Motivated by the success of alternating direction method of multipliers (ADMM), we consider extending the ADMM to L¹-EOCP. To discretize L¹-EOCP, the piecewise linear finite element (FE) is considered. However, different from the finite dimensional l1-norm, the discretized L¹-norm does not have a decoupled form. To overcome this difficulty, an effective approach is utilizing nodal quadrature formulas to approximately discretize the L¹-norm and L²-norm. It is proved that these approximation steps will not change the order of error estimates. To solve the discretized problem, an inexact heterogeneous ADMM (ihADMM) is proposed. Different from the classical ADMM, the ihADMM adopts two different weighted inner products to define the augmented Lagrangian function in two subproblems, respectively. Benefiting from such different weighted techniques, two subproblems of ihADMM can be efficiently implemented. Furthermore, theoretical results on the global convergence as well as the iteration complexity results o(1/k) for ihADMM are given. In order to obtain more accurate solution, a two-phase strategy is also presented, in which the primal-dual active set (PDAS) method is used as a postprocessor of the ihADMM. Numerical results not only confirm error estimates, but also show that the ihADMM and the two-phase strategy are highly efficient.     

TTAC-HPMo/SiO_2催化剂的表征及其氧化脱硫性能分析

以十四烷基三甲基氯化铵(TTAC)为模板剂,正硅酸乙酯(TEOS)为硅源,采用溶胶-凝胶法制备TTAC-HPMo/SiO_2催化剂,利用FTIR、XRD、SEM和N_2吸附-脱附等技术对其进行表征,并分析催化剂制备条件和反应条件对模型油氧化脱硫性能的影响。结果表明,在m(HPMo)/m(SiO_2)=15%、焙烧温度为400℃条件下所制TTAC-HPMo/SiO_2催化剂,其孔隙结构发达、氧化脱硫性能最佳;对于10mL以二苯并噻吩(DBT)为目标含硫化合物的模型油(硫含量为400μg/g),当m(TTAC-HPMo/SiO_2)/m(模型油)=0.43%、V(H_2O_2)/V(模型油)=0.2%、反应温度为60℃、反应时间为14min时,所制TTAC-HPMo/SiO_2催化剂对模型油中DBT的脱除率达到100%。     

川东北地区须三段钙屑砂岩储层特征及控制因素

近两年川东北地区西北部多口井须家河组三段钙屑砂岩测试段获工业气流,表明了研究区储层的含气性及局
部具备油气富集高产的地质条件。通过储层岩性类型、储集空间、物性、电性等特征进行综合分析,得出结论为：主要
储层岩性类型为钙屑砂岩,常伴有微裂缝;储集空间类型多样,主要为残余原生粒间孔、次生溶蚀孔和裂缝;储层表现
为低孔、低渗特征;储层电阻率高,主要原因是碳酸盐岩含量高;储层测井响应为“三低、一高、一降低”,即伽马低值、
声波低值,中子低值,电阻率高值,在高阻的背景下深浅电阻率有所降低。研究区优质钙屑砂岩储层受储集层发育的
有利沉积微相、溶蚀作用、构造裂缝以及一定的储层厚度等综合因素控制。辫状河道、水下分流河道沉积为储层最有
利的沉积相带;在成岩过程发生的溶蚀作用和多期次的断裂影响下形成的构造裂缝都极大地改善了储层的渗透性;一
定厚度的储层改善了裂缝的连通系统。     

基于LabVIEW的数字相关测量仪设计

阐述了相关分析的基本原理和相关测量仪的编程算式，提出了基于虚拟仪器软件平台LabVIEW的相关测量仪设计思想，介绍了相关测量仪实验系统的构成与主要模块功能及软面板和流程图的设计制作过程。     

云杉大规格苗木培育与移植技术

在定植苗选择、定植要求、树冠整形、水肥管理、断根培育、病虫害防治等方面介绍了培育云杉大苗培育技术,并介绍了大苗移植时间、起苗与包装、大苗固定、浇水封穴等关键技术及栽后管护等技术,通过调查分析并结合生产实践,确定出了云杉大苗I、II级苗木质量等级标准。     

金属等离子体浸没动态离子束增强沉积

采用由阴极真空弧等离子体源、负脉冲高压靶台和磁过滤系统组成的金属等离子体浸没动态离子束增强沉积系统,对３０４Ｌ不锈钢进行金属等离子体浸没动态离子束增强沉积处理。对试样予以电化学测试和ＡＥＳ分析。动态增强沉积试样比非增强沉积试样有更强的抗电化学腐蚀能力。