金属在福州地热水中的腐蚀热力学研究──(I)、铜—地热水系统

作者从热力学角度以电位－ｐＨ图探讨金属在福州地热水中的腐蚀趋势．本文报导铜－地热水系统，采用ＢＡＳＩＣ语言编制程序在ＡＰＰＬＥ－Ⅱ微机上计算高温热力学数据，并以ＤＸＹ－８００绘图仪绘制电位－ｐＨ图．同时，测定了铜在福州Ｇｗ２井地热水中的实际腐蚀电位．结果表明：在此地热水中，当温度低于３１８Ｋ，铜表面生成Ｃｕ２Ｏ膜，高于３１８Ｋ，生成ＣｕＯ膜，二者都位于钝化区．     

钠快离子导体Na_(2.5)Zr_(2-x)Ti_xSi_(1.5)P_(1.5)O_(12.0)系统的研究

钠快离子导体Ｎａ_２．５Ｚｒ_２－ｘＴｉ_ｘＳｉ_１．５Ｐ_１．５Ｏ_１２．０系统ｘ＝０－２．０的化合物，由Ｎａ_３ＰＯ_４－ＺｒＯ_２－ＺｒＰ_２Ｏ_７－ＳｉＯ_２－ＴｉＯ_２为反应的起始原料，在９００℃－１２００℃的高温下反应数小时至二十小时制得。系统化合物的相变关系已探明，并测定了有关的单纯相在不同温度下的导电率以及电导激活能。相当于起始组成为Ｎａ_２．５Ｚｒ_１．０Ｔｉ_１．０Ｓｉ_１．５Ｐ_１．５Ｏ_１２．０的单纯相（标为２．５１相）在３００℃时的导电率σ３００＝１．８５×１０－２（Ω·ｃｍ）－１，其电导激活能为２３．６４ｋＪ／ｍｏｌｅ，相当于起始组成为Ｎａ_２．５Ｔｉ_２．０Ｓｉ_１．５Ｐ_１．５Ｏ_１２．０的单纯相（标为２．５２相）在３００℃时的导电率σ３００＝０．４６×１０－２（Ω·ｃｍ）－１，其电导激活能为２８．８９ｋＪ／ｍｏｌｅ．     

Functional magnetic resonance imaging of amphetamine craving

The aim of this study is to identify the brain activity associated with amphetamine craving for understanding the neurobiology of addiction by watching pictures of happy, sad or amphetamine. Brain activity was measured in 12 amphetamine addicts and 12 healthy subjects by fMRI while the subjects watched pictures designed to elicit happy feelings, sad feelings, or the desire to use amphetamine. The result demonstrated that amphetamine cues led to abnormally high cingulate and low frontal lobe activation in amphetamine addicts, who showed abnormalities in affect-related brain activation.     

An ERP study for the degrees of the difficulty in visual search

The present study mainly probed the relationships between ERP components and the degrees of difficulty in visual search. Three experimental and one controlled conditions were randomly selected. Results showed that the P1, N1, and P2 amplitudes and latencies had no significant differences among the three experimental and one controlled conditions, and the ERP waveforms of low perceptual load of visual search were different from that of high perceptual load. These results might indicate that the latencies and amplitudes of initial P1, N1 and P2 in high and low perceptual load conditions were almost the same. The ERP waveforms of parallel search were very different from that of serial search, and the ERP waveforms of serial search were very similar. The P3 amplitudes increased as the degrees of the difficulty in visual search decreased.     

基于PLC的温度控制在电镀生产线中的应用

介绍了以三菱FX0NPLC为核心的温度控制系统在电镀生产线中的应用。简述了温度控制原理,论述了控制系统的设计方案及其软硬件的实现方法。实践表明该方法简单易行,适应性好,可靠性高。     

Molecular cloning and expression of interleukin Ibeta (IL-1β) from red seabream (Pagrus major)

The interleukin 1β (IL-1β) cDNA was cloned from the red seabream (Pagrus major) by homology cloning strategy. A cDNA fragment was amplified by PCR using two degenerated primers, which were designed according to the conserved regions of other known IL-1β sequences, and elongated by 3' ends and 5' ends RACE PCR to get the full length coding sequence of red seabream IL-1β (RS IL-1β). The sequence contained 1252 nucleotides that included a 5' untranslated region (UTR) of 84bp, a 3' UTR of 410 bp and an open reading frame (ORF) of 759 nucleotides which could be translated into a putative peptide of 253 amino acids with molecular weight of 28.6 kD and putative isoelectric point pI of 5.29. The deduced peptide contained two potential N-glycosylation sites and an identifiable IL1 family signature, but lacked the signal peptide and the clear ICE cut site, which were common in other nonmammalian IL-1β genes. The RS IL-1β had the highest homology with piscine IL-1β according to phylogenetic tree analysis.     

Development of Full Automatic External Welding Machine for Annular Welds of Pipeline

To meet the demands of rapid development of pipeline constructions in China, a complete set of full automatic external welding machine for annular welds of pipeline and welding procedure have been developed thereof. The system has been applied in the “West-East Pipeline Project” and its performance is proven. With this welding machine the welding parameters can be either preset before or adjusted in real time during the welding process, which avoids the blemishes of same type domestic and international products. Thus it is best propitious to in-situ construction conditions and workers‘ technical level in China. In this article the development of mechanical and control systems of this product is introduced and typical welding procedure parameters are provided.     

僧帽牡蛎碱性磷酸酶功能基团的研究

采用化学修饰法研究僧帽牡蛎碱性磷酸酶活性功能基团性质.酶经0.4mmol·L-1PCMB修饰30min后活力仍然保持不变,提示巯基与酶的活力无关;用二巯基苏糖醇(DTT)对酶进行修饰,当DTT浓度达到2.5mmol·L-1时,酶活力丧失98%,表明硫 硫键与酶活力有密切的关系;以N 溴代琥珀酰亚胺(NBS)修饰酶的色氨酸残基,酶的修饰失活呈一级反应,当NBS浓度达到0.65mmol·L-1时,酶活力丧失100%,并辅以紫外吸收光谱的变化分析,表明色氨酸残基是酶催化活力所必需的;醋酸酐、马来酸酐、甲醛等氨基试剂对酶的修饰作用显示氨基是酶的必需基团.     

制备介孔复合环境材料的酸洗刻蚀工艺

探索了一种制备介孔复合环境材料的方法--破坏式造孔与有机复合相结合,使最终产品可大量吸附污染水体中的各种污染物并具有一定的杀菌功能.该方法通过酸洗刻蚀,达到了去除原材料中的杂质和刻蚀孔径的目的,所制备的中间产品24h吸湿率为原材料的2倍,染料吸附量为原材料的1.6倍.     

极低硫钢的精炼脱硫动力学模型

通过对影响脱硫反应限制性环节的分析,将持续接触和瞬时接触两种反应模式综合考虑,建立了精炼脱硫动力学模型,并通过实验室"极低硫钢精炼脱硫"实验数据对模型进行验证.结果表明,本模型的预测结果与实验结果比较吻合.