Experimental study on multi-point autoignition characteristics and influence factors of diesel spray in a controllable active thermo-atmosphere

Auto-ignition characteristics of high-pressure diesel spray in the controllable active thermo-atmos-phere (CATA) were studied with a high-speed camera video system. Multi-point autoignition phe-nomenon of diesel spray in the CATA was observed and the influence factors of the autoignition were analyzed. The stabilization mechanisms of the spray flame in different coflow temperatures were also discussed. The stabilization of the flames was controlled by different factors: autoignition phenomenon in low coflow temperature and flame spread in high coflow temperature. The test results also show that the autoignition delay depends strongly on the coflow temperature and has nonlinear relationship with the temperature. Autoignition delay decreases by almost 10 ms from 16.9 to 7.1 ms when the coflow temperature increases from 996 to 1048 K and only 4 ms from 1048 to 1101 K. The injection parameters in terms of nozzle diameter, injection pressure and pump speed, have some effects on autoignition delay while these effects depend on the coflow temperature. The significant effect lies in low coflow temperature. The injection parameters influence the autoignition delay because it can shorten the physical delay by improving the spray quality and enlarging the spray angle or penetration rate to im-prove mixture quality.     

基于优化多相编码和天线设计的MIMO STAP研究

多发多收（MIMO,multiple input and multiple output）雷达发射正交波形以获得良好的波形分集增益和更高的自由度。为了提高信号的自相关和互相关性能,采用循环算法（CA,cyclic algorithm）,得到了具有低自相关旁瓣峰值（ASP,auto correlation sidelobe peak）和互相关峰值（CP,cross correlation peak）的多相编码信号。仿真实验基于优化多相编码信号和天线阵列结构实现STAP（space-time adaptive processing）,克服了多信号间相互影响、稀疏天线布阵结构导致的盲速和密布天线布阵影响孔径大小等问题,验证了本文方法有效性。     

Construction and expression of retroviruses encoding dual drug resistance genes in human umbilical cord blood CD34+ cells

A series of retro viral vectors encoding humanmdr1 gene alone as wetl as in combination with either humanmgmt gene or human mutantSer ³¹-dhfr gene are engineered. The resultant retroviruses are used to transduce human umbilical cord blood CD34⁺ cetls. It has been shown that expression of dual drug resistance genes in transduced cetls confers a broad range of resistance to both kinds of corresponding drugs. These data suggest a rationale for the use of such double chemoresistance gene constructs in anin vivo model in which transduced hematopoietic cetls will acquire multiple protection against the cytotoxic side effects of combination chemotherapy and may have future application in chemoprotection of normal tissues, thus killing tumor cetls more effectivety.     

齿轮啮合原理在滚子-平底共轭凸轮机构中的应用

本文应用齿轮啮合的研究方法来处理滚子-平底从动摆杆共扼凸轮机构,将齿轮研究领域内的相关概念推广到该类机构中去,从而揭示了共轭凸轮机构的本质特征,获得一系列重要参数的精确计算公式。     

锂渣高性能混凝土的性能与微观结构

锂渣是新疆特有的工业废渣,为了寻求其利用,采用锂渣来配制高性能混凝土。从力学、抗裂、收缩性能与微观结构等方面探究其增强、抗裂机理。试验结果表明:锂渣的最大掺量不宜超过45%;随着掺量的增加,收缩率增加不明显,但都较空白组要小;当掺量在20%~30%时,其力学、抗裂性能较好;锂渣掺入混凝土后,细化了混凝土的凝胶孔,提高其密实度;且在混凝土中形成了一定量的AFt,改善了其抗裂、力学性能。     

碳扩散对非真空热轧不锈钢复合板结合性能的影响

采用非真空热轧方法制备304不锈钢/Q235碳钢复合板材,利用OM、SEM、EDS等研究了不同压下率和轧后冷却方式下复合界面夹杂物、界面组织及力学行为的演变,并分析了C扩散对复合板界面组织形成及结合强度的影响。结果表明,随着轧制压下率的增加,界面夹杂物由块状向线型、连续点状乃至弥散点状分布变化。当压下率较低(28%)时,复合板剪切断裂位于结合界面处,随着压下率增加至47%及以上,复合板断裂位置为脱碳铁素体区。另外,热轧复合板经水冷工艺处理后,由于冷却速率较快,要抑制碳钢侧C元素的扩散,避免复合界面处脱碳区域的形成,从而提高了复合界面的结合强度。     

土壤水力侵蚀能量力学机理的理论分析

根据力学和物质与能量原理，对土壤水力侵蚀这一自然地理现象从哲学的高度进行分析，认为水动力作用是土壤水力侵蚀的根本原因；物质与能量守恒是土壤水力侵蚀的基本法则；侵蚀与沉积并存是土壤水力侵蚀的普遍规律。提出基于能量力学机理的3个土壤水力侵蚀的新理论，即侵蚀平衡理论、最大梯度理论和水流侵蚀力理论。指出按这种思想建立的数学模型能揭示土壤水力侵蚀的规律，因而具有重要的理论和应用价值。     

子宫动脉栓塞术在难治性产后出血中的应用

目的:探讨子宫动脉栓塞术在产后出血中的应用。方法:对2008年3月—2011年1月铜川市妇幼保健院及泾阳县医院共10例产后出血应用双侧子宫动脉选择性造影及栓塞术后的观察效果。结果:10例产后出血患者经过双侧子宫动脉选择性造影及栓塞术后,止血时间3～8min,手术时间30～50min,DSA表现为宫腔内弥漫性、局灶性或单侧子宫动脉分支出血。10例均恢复月经周期,子宫得以保留,随访3-6月无严重并发症。结论:对难治性产后出血应用子宫动脉栓塞术微创临床效果好。     

L-Fuzzy理想的L-Fuzzy剩余类的刻画

给出当L是完全分配格时L-fuzzy理想的L-fuzzy剩余类的定义及若干刻画,并证明了若f:X→Y是环满同态,B是Y的L-fuzzy理想,则X关于L-fuzzy理想f -1(B)的L-fuzzy剩余类做成的环X/f-1(B)与环Y同构.     

Optimal Switching Integrity Attacks on Sensors in Industrial Control Systems

In this article, an optimal switching integrity attack problem is investigated to study the response of feedback control systems under attack. The authors model the malicious attacks on sensors as additive norm bounded signals. The authors consider an attacker who is only capable of launching attacks to limited number of sensors once a time and changing the combinations of attacked sensors all over the time. The objective of this paper is to find the optimal switching sequence of these combinations and the optimal attack input. The authors solve this problem by transforming it into a traditional optimal control problem with new control variables vary continuously in the range [0, 1]. The optimal solutions of the new control variables are of bang-bang-type. Therefore, an algebraic switching condition and an optimal attack input can be obtained. Finally, numerical results are provided to illustrate the effectiveness of the methods.