波函数及其在稀土离子晶场参数从头计算中的应用

量子力学主要研究微观粒子及其运动规律,波函数是其中一个非常基础且重要的概念。本文在简要介绍波函数概念的基础上,重点阐述其在物理学特别是在稀土离子晶场参数从头计算中的应用。通过铈离子掺杂发光材料体系计算实例的展示加强量子力学初学者对波函数概念的理解,并激发他们对量子力学课程学习的兴趣。     

联合检测血清胱抑素C、β2微球蛋白和转铁蛋白对原发性肾小球肾炎的早期诊断价值

目的探讨联合检测血清胱抑素C(CYSC)、β_2微球蛋白(β_2-MG)和尿转铁蛋白(TRF)对原发性肾小球肾炎患者的早期诊断价值.方法选择原发性肾小球肾炎患者50例为观察组,选择体检中心健康体检者50例作对照组,比较两组3种检验指标的结果并进行分析.结果观察组血清中CYS C,β_2-MG和TRF水平高于健康对照组,差异具有统计学意义(P0.05).观察组根据临床病理分型的Ⅱ,Ⅲ,Ⅳ型患者血清中CYSC,β_2-MG,TRF水平浓度均高于Ⅰ型,血清水平呈递增性升高.结论通过联合检测CYSC,β_2-MG,TRF有助于原发性肾小球肾炎的早期诊断,并且能够准确、灵敏地反映肾小球功能损伤程度.     

张力带与髌骨爪置入治疗单纯横行和粉碎性髌骨骨折疗效分析

目的比较张力带和髌骨爪置入治疗单纯横行骨折和粉碎性骨折患者疗效,为临床两种手术方法的选择提供依据.方法对接受治疗的38例髌骨骨折患者进行回顾性分析,其中20例患者采用张力带疗法,18例患者采用髌骨爪疗法,比较不同疗法患者手术时间、术中出血量、并发症发生率、骨折愈合时间、膝关节功能恢复情况.结果张力带固定组患者术中出血量(305.2±36.5)m L,显著高于髌骨爪固定组患者(283.4±24.8)m L(P0.05),张力带固定组粉碎性骨折患者平均手术时间(54.1±9.1)min,显著长于髌骨爪固定组粉碎性骨折患者(52.9±2.8)min(P0.05).两组患者骨折愈合时间无显著性差异(11.9±1.9,12.4±1.8)周,膝关节功能评价平均分髌骨爪固定组患者(78.7±9.3)分,显著优于张力带固定组患者(84.7±9.2)分(P0.05).结论对于一般髌骨横行骨折患者,可采用张力带固定方式,而对于年龄较大、身体素质较差、粉碎性骨折患者,推荐采用髌骨爪固定方式,以减少术后并发症发生,促进膝关节功能恢复.     

一种低剖面、低RCS兼具高增益特性的覆层微带天线设计

设计了一种低剖面覆层微带天线,兼具高增益、低雷达散射截面积RCS特性。覆层单元上表面为加载集总电阻的方环贴片,具有吸波和部分反射特性,下表面为"十"字开槽的金属镀层,将覆层与上表面加载同相反射特性的AMC单元的原始微带天线一体化设计,因覆层厚度可作为部分反射路径以及加载同相反射AMC单元,极大降低剖面。另一方面覆层上表面与AMC单元形成Fabry-Pérot谐振腔,改善天线辐射特性。仿真与实测结果表明:相对于原始天线,该覆层天线在整体厚度只有7mm的前提下,反射系数|S11|-10dB带宽由原来的13.84～15.24 GHz稍频偏到13.8～15.36 GHz;增益也得到较好的改善,在14.40～15.42GHz增益提高了3dB以上,最大提高增益6.29dB;天线在6～17GHz频段内有不同程度RCS的减缩,在宽角域内实现了RCS减缩,其中6dB减缩带宽为8.86～13.56GHz,最大减缩量为14.8dB。     

表面活性剂及其复配体系对漆酶活性和稳定性的影响

本文研究了5种表面活性剂Brij-35、Tween-80、TX-100、AOT和甜菜碱对漆酶活性和稳定性的影响,探讨漆酶最适宜的反应温度和pH值,并通过Brij-35与其他4种表面活性剂组建不同类型的复配体系,分析在表面活性剂复配体系中漆酶活性与稳定性的变化情况。结果表明,不同类型和浓度的表面活性剂对漆酶催化性能的影响各异,影响方式主要取决于其头部基团的离子性质;加入表面活性剂后,漆酶的最佳反应温度(40℃)没有改变,最佳pH值(3.0)基本没变,但添加AOT的漆酶最佳pH值迁移到3.5;在合适条件下,表面活性剂可以提高漆酶的活性和稳定性,在4种复配体系中,非离子型与非离子型复配的表面活性剂(Brij-35/Tween-80,Brij-35/TX-100)最有利于漆酶的稳定性。     

Microstructure and corrosion behavior of Al<Subscript>3</Subscript>Ti/ADC12 composite modified with Sr

In this study, we investigated the effect of the addition of Sr (0wt%, 0.1wt%, 0.2wt%, and 0.3wt%) on the microstructure and corrosion behavior of Al₃Ti/ADC12 composite by optical microscopy, X-ray diffraction, scanning electron microscopy, and energy diffraction spectroscopy. The results reveal that the α-Al phases were nearly spherical and 40 μm in size and that the eutectic Si phases became round in the composite when the Sr content reached 0.2wt%. The Al₃Ti particles were distributed uniformly at the grain boundary. The results of the corrosion examination reveal that the Al₃Ti/ADC12 composite exhibited a minimum corrosion rate of 0.081 g·m–2·h–1 for an Sr content of 0.2wt%, which is two thirds of that of unmodified composite (0.134 g·m–2·h–1). This improved corrosion resistance was due to galvanic corrosion, which resulted from the low area ratio of the cathode to anode regions. This caused a low-density corrosion current in the composite, thereby yielding optimum corrosion resistance.     

Corrosion behavior of high-strength spring steel for high-speed railway

The corrosion resistance and evolution of corrosion products in medium-carbon high-strength spring steels were investigated in a neutral salt spray (5wt% NaCl solution). A formation model of γ-FeOOH and a transformation model describing the conversion of γ-FeOOH to α-FeOOH were constructed. The results indicated that, at the initial corrosion stage, the corrosion resistance was gradually improved with the addition of Cr; however, with the addition of alloying element V, the corrosion resistance decreased. These results were attributed mainly to the initial corrosion stage being closely related to the matrix microstructure parameters such as grain-boundary character and dislocation density. After the rust layer was formed at a later corrosion stage, the corrosion resistance was reinforced with the addition of Cr and V because Cr strongly influenced the composition, structure, and morphology of the corrosion products. The results presented herein show that Cr was conducive to the transformation of γ-FeOOH into α-FeOOH. Moreover, V and Cr exhibited obvious synergy and were enriched in the inner layer of the corrosion products.     

Microstructural characterization and oxidation resistance of multicomponent equiatomic CoCrCuFeNi-TiO high-entropy alloy

CoCrCuFeNi-TiO was prepared by arc melting of the pure elements and Ti₂CO powder under an Ar atmosphere. Both CoCrCuFeNi and CoCrCuFeNi-TiO alloys are composed of a face-centered cubic (fcc) solid solution, whereas the alloys of CoCrCuFeNi-TiO are basically composed of an fcc solid solution and TiO crystals. The microstructures of CoCrCuFeNi-TiO are identified as dendrite and interdendrite structures such as CoCrCuFeNi. The morphology of TiO is identified as an equiaxed crystal with a small amount of added Ti₂CO. By increasing the amount of Ti₂CO added, the TiO content was dramatically increased and part of the equiaxed crystals changed to a dendrite structure. A test of the oxidation resistance demonstrates that the oxidation resistance of CoCrCuFeNi-TiO is better than that of CoCrCuFeNi. However, as the TiO content increases further, a corresponding decrease is observed in the oxidation resistance.     

季节性应用复方丹参滴丸对单纯性高血压的疗效观察

目的探讨季节性应用复方丹参滴丸对单纯性高血压的影响,寻找出能够有效控制和预防单纯性高血压并发症发生的方法,提高治疗效果,提高患者生存质量的同时降低患者经济负担。方法对入选的单纯性高血压患者分成两组:治疗组和对照组。治疗组每年3～4月(春夏交替之际)及10～11月(秋冬交替之际)口服复方丹参滴丸+正常治疗),对照组采用正常治疗,即根据患者不同的情况,对患者进行个体化规范化的降压治疗;对治疗组和对照组进行2年随访,以其并发症和平均再住院次数为指标,进行统计学分析,以确定其临床实际意义。结果治疗组与对照组的高血压并发症的发生率比较,2年具有显著性差异(P0.05);两组平均再住院次数存在显著性差异(P0.05)。结论季节性应用复方丹参滴丸能够有效控制和预防单纯性高血压。     

基于卡方核的正则化线性判别行人再识别算法

针对行人再识别过程中存在获取的训练样本较少,真实样本分布不一定线性可分和算法识别率低的问题,提出基于卡方核的正则化线性判别分析行人再识别算法(KRLDA,kemel regularized linear discriminant analysis)。该算法首先利用核函数将样本从线性不可分的原始空间映射到线性可分的高维特征空间,然后在高维空间中构造描述数据之间邻近关系的散度矩阵,再利用正则化线性判别分析获得高维到低维空间的投影矩阵,使得数据在低维空间能够保持高维空间的可分性,从而提升行人再识别算法的识别率。在VIPeR、iLIDS、CAVIAR和3DPeS数据集上,实验结果表明所提出的算法具有较高识别率。