搪瓷用钢抗鳞爆性能研究进展

搪瓷制品鳞爆缺陷已经成为国内外研究重点。为提高搪瓷用钢的抗鳞爆性能,非常有必要了解搪瓷层的鳞爆机理。综述了国内外研究鳞爆机理以及氢扩散影响因素的现状。     

利用SRTM数据修测高山区地貌的探讨

在高海拔区域测制地形图,如青藏高原地区,所获取的遥感影像局部存在着大范围的高山阴影或云雪覆盖,造成立体观测地貌困难的现象,探讨应用SRTM数据对这类特殊区域地貌进行修测补绘。介绍了数据处理的作业过程,并对实验区SRTM与SPOT5影像立体测图成果进行实验对比分析,成果符合要求。     

A Layer-Stripping Method for 3D Near-Surface Velocity Model Building Using Seismic First-Arrival Times

In order to improve the efficiency of 3D near-surface velocity model building, we develop a layer-stripping method using seismic first-arrival times. The velocity model within a Common Mid-Point (CMP) ...     

“二三结合”开发模式渗流特征研究

L油田B区块开展"二三结合"实验区,"二三结合"开发模式渗流特征对区块的合理高效开发具有重要意义。为了明确其渗流特征,利用油藏数值模拟软件Eclipse建立代表意义的油藏数值模型,研究区块"二三结合"开发模式下原射孔层和补孔层的渗流特征,分析了"二三结合"开发模式下,不同开发阶段综合含水率、采出程度、井底压力、地层压力及含水饱和度的变化特征。研究表明,"二三结合"开发模式先通过水驱开发挖潜原射孔层剩余油,提高厚油层顶部剩余油的采出程度,再通过聚合物驱进一步提高开发效果,通过水驱与聚驱的综合作用,最终得到较好的开发效果。     

An Economic Model-Based Matching Approach Between Buyers and Sellers Through a Broker in an Open E-Marketplace

A broker in an open e-marketplace enables buyers and sellers to do business with each other. Although a broker plays an important role in e-marketplaces, theory and guidelines for matching between buyers and sellers in multi-attribute exchanges are limited. Therefore, a challenge for a broker’s responsibility is how to maximize a buyer’s total satisfaction degree as its goals under the consideration of trade-off between a buyer’s buying quantity and price paid to a seller, and other attributes. To solve this challenge, this paper proposes an economic model-based matching approach between a buyer’s requirements and a seller’s offers. The major contributions of this paper are that (i) a broker can model a seller’s price policy as per a buyer’s buying quantity through communication between a broker and a seller; (ii) due to each buyer’s different quantity demand, a broker models a buyer’s satisfaction degree as per a buyer’s buying quantity based on communication between a broker and a buyer; and (iii) to carry out a broker’s matching processes, an objective function and a set of constraints are generated to help a broker to maximize a buyer’s total satisfaction degree. Experimental results demonstrate the good performance of the proposed approach.     

彩虹黑弦的热力学性质

双重相对论(DSR)是描述平直时空中的量子引力的一个有效模型.当试图将该模型纳入到弯曲时空中考虑时,一种被称为"彩虹引力"的理论可帮助实现这一推广,此时背景时空依赖于探测粒子的能量.事实上受粒子能量影响的度规的形式依赖于正交系的选取.本文主要考虑了自由落体参考系下的彩虹静态柱对称黑洞(彩虹黑弦).得到了取一阶近似的彩虹黑弦的霍金温度和熵,这种修正来源于考虑的彩虹引力效应.     

基于修正斜压场的RC框架边节点剪切性能分析

为研究钢筋屈服强度和混凝土抗压强度对钢筋混凝土(RC)框架边节点剪切性能的影响规律,基于修正斜压场理论(MCFT),对某框架边节点的剪切应力-应变骨架曲线进行数值模拟,并与试验结果进行对比.在验证MCFT算法的精度后,研究钢筋屈服强度和混凝土抗压强度两个参数变化对RC框架边节点剪切应力-应变骨架曲线和峰值剪切应力的影响规律.结果表明:基于MCFT可以较好地模拟RC框架边节点的剪切应力-应变关系曲线; RC框架边节点的峰值剪切应力对混凝土抗压强度的变化更为敏感,但当试件的钢筋(HRB400)屈服应力下降幅度超过16.45%时,对钢筋屈服应力的变化更为敏感;当试件的钢筋(HRB400)屈服应力下降幅度超过10%时,节点发生钢筋滑移破坏,此时峰值剪切应力会大幅下降.     

Effects of Strain Rate,Temperature and Grain Size on the Mechanical Properties and Microstructure Evolutions of Polycrystalline Nickel Nanowires: A Molecular Dynamics Simulation

Through molecular dynamics(MD)simulation,the dependencies of temperature,grain size and strain rate on the mechanical properties were studied.The simulation results demonstrated that the strain rate from 0.05 to 2 ns~(–1 )affected the Young’s modulus of nickel nanowires slightly,whereas the yield stress increased.The Young’s modulus decreased approximately linearly;however,the yield stress firstly increased and subsequently dropped as the temperature increased.The Young’s modulus and yield stress increased as the mean grain size increased from 2.66 to6.72 nm.Moreover,certain efforts have been made in the microstructure evolution with mechanical properties association under uniaxial tension.Certain phenomena such as the formation of twin structures,which were found in nanowires with larger grain size at higher strain rate and lower temperature,as well as the movement of grain boundaries and dislocation,were detected and discussed in detail.The results demonstrated that the plastic deformation was mainly accommodated by the motion of grain boundaries for smaller grain size.However,for larger grain size,the formations of stacking faults and twins were the main mechanisms of plastic deformation in the polycrystalline nickel nanowire.     

广西高技术产业科技创新能力评价研究

文章在分析广西高技术产业发展现状基础上,构建高技术产业科技创新能力评价指标体系,运用熵值法,基于2015—2019年面板数据对广西高技术产业的创新能力进行实证研究.研究表明:广西高技术产业创新能力在西部五省中处于较低水平;广西高技术创新产出实力略低于创新投入实力,创新技术吸收实力仍相对较弱;广西高技术四大行业创新能力存在差异,即电子及通信设备制造产业科技创新投入和产出效果最好,医药制造业和电子通信及装备制造业创新投入高,创新产出评分偏低,医疗仪器设备及仪器仪表制造产业和计算机及办公设备制造产业创新吸收能力很弱.基于以上结论,文章从加大创新资源投入、推动创新平台建设、加强人才队伍建设等方面提出了对策建议.     

Hierarchical Community Detection Based on Partial Matrix Convergence Using Random Walks

Random walks are a standard tool for modeling the spreading process in social and biological systems.But in the face of large-scale networks,to achieve convergence,iterative calculation of the transition matrix in random walk methods consumes a lot of time.In this paper,we propose a three-stage hierarchical community detection algorithm based on Partial Matrix Approximation Convergence(PMAC) using random walks.First,this algorithm identifies the initial core nodes in a network by classical measurement and then utilizes the error function of the partial transition matrix convergence of the core nodes to determine the number of random walks steps.As such,the PMAC of the core nodes replaces the final convergence of all the nodes in the whole matrix.Finally,based on the approximation convergence transition matrix,we cluster the communities around core nodes and use a closeness index to merge two communities.By recursively repeating the process,a dendrogram of the communities is eventually constructed.We validated the performance of the PMAC by comparing its results with those of two representative methods for three real-world networks with different scales.