Super-plasticity of Zr<Subscript>64.80</Subscript>Cu<Subscript>14.85</Subscript>Ni<Subscript>10.35</Subscript>Al<Subscript>10</Subscript> bulk metallic glass at room temperature

Generally, bulk metallic glasses （BMGs） exhibit a very limited plastic deformation under a compression load at room temperature, often less than 2% before fracturing. In this letter, through an appropriate choice of BMGs＇ composition, an amorphous rod of Zr64.80Cu14.85Ni10.35Al10 with a diameter of 2 mm was prepared by using copper mold suction casting. X-ray diffraction and differential scanning calorimetry were utilized to determine its structure and thermal stability, and the uniaxial compression test was adopted to study its plastic deformation behavior at room temperature simultaneously. The results showed that the glass transition temperature and onset temperature of the exothermic reaction of the amorphous rod were 646 and 750 K, respectively, and its micro-hardness was 594.7 Hv. During compression, when the engineering strain and engineering stress arrived at 9.05% and 1732 MPa, respectively, i.e., the true strain and true stress reached 9.42% and 1560 MPa, respectively, the amorphous rod started to yield. After yielding, with the increase of load, the strain increased and the glass rod ulti- mately were compressed into flake-like form. Although the maximum engineering strain was larger than 70%, i.e., the maximum true strain exceeded by 120%, the amorphous specimen was not fractured, indicating that it has super-plasticity at room temperature. Through the appropriate choice of composition and optimization of the technological process, flexible BMG with super-plasticity at room temperature could be produced.     

人工摊铺水泥混凝土路面的平整度控制

介绍了人工摊铺水泥混凝土提高平整度的方法,并总结了施工中配置机具的施工工艺过程。     

放顶煤开采技术研究与实践

总结几年来的放顶煤开采,从技术管理方面、设备安装使用方面等积累了丰富的经验。为今后煤矿建设高产、高效、质量标准化奠定了良好的基础。     

高校杰出学者和优秀教师成长的特征

采取分类抽样调查方法,通过对100名高校杰出学者和优秀教师成长的特征进行了初步分析,发现他们在成长过程中存在4种共性特征,即：品学兼优的人格特征、广泛的国外交流、卓越的组织管理能力、独到的学术和教育教学思想。     

Borg定理的改进

Borg定理是判定周期系数二阶线性微分方程稳定的一个重要工具,本文在弱的限制下改进Borg定理.     

秋冬季生殖真鲷仔、稚、幼鱼摄食习性与生长的研究

本文分析了秋冬季生殖真鲷仔、稚、幼鱼的摄食和生长。结果表明，在水温为２０℃时，真鲷仔鱼约经６０～６５小时左右开口摄食，开口饵料为牡蛎幼虫和小轮虫。以后，随着鱼体的生长，摄食桡足类和卤虫无节幼体的比例迅速增加，全长２０毫米以上的个体可摄食鱼糜。对３１２尾仔、稚、幼鱼观察结果，在实验条件下，其摄食率高达９８．１％。摄食强度具明显的昼夜节律，以下午１６∶００摄食强度最高，上午８∶００其次，仔、稚鱼阶段夜间完全不摄食，表现出明显的昏晨摄食习性。对２００尾仔、稚、幼鱼的全长、体重、摄食量和日龄的回归方程进行了计算，其摄食量和体重的回归方程为ｙ＝－０．３６８６＋０．１３３６ｘ，全长与日龄的关系式为ＴＬ＝１．４９３５ｅ￣（０．０２３Ｄ），体重与日龄的回归方程可用ｗ＝５．０９９８×１０￣（－２）ｅ￣（０．２０５４Ｄ）表示，全长和体重的关系式则为ｗ＝２．２２９２×１０￣（－３）Ｌ￣（３．６４４６）。     

颗粒污泥及其形成过程

本文综述了颗粒污泥的性能及形成条件,对在豆制品废水厌氧消化处理的UASB反应器里颗粒污泥形成的过程进行了观察和照相,将颗粒污泥的形成过程分为5个时期,即絮凝污泥丝状菌增长期,颗粒污泥亚单位生成期,亚单位聚集期,初生颗粒生长期及颗粒污泥生长和成熟期。论述了每个时期的污泥形态及工艺运转负荷和注意事项。     

热力学的几何表述

本文依据几何图形，根据不同的规则，分别表达了热力学的基本微分方程，麦克斯韦关系式，麦克斯韦恒等式等基本关系式及热动平衡和特性函数。     

甘肃省农田杂草区划

根据调查资料,自然条件和各地耕作栽培特点,把我省农田杂草划分成六个草害区。河西灌溉农业草害区主要杂草有藜、野燕麦、田旋花等;陇中黄土丘陵旱作农业草害区主要杂草有猪殃殃、苣荬菜、日本田箭等;洮岷高寒阴湿草害区主要杂草有细穗密花香薷、刺儿菜、萹蓄等;陇南山地农业草害区主要杂草有播娘蒿、繁缕、麦瓶草等;陇东黄土高原旱作草害区主要杂草有雀麦、离子草、狗尾草等。明确了各地主要杂草种类与危害,为制定化学防除策略提供了依据。