渐开线少齿差内齿轮副的优化设计及其图形的自动显示

采用优化设计方法来解决渐开线少齿差行星传动中内齿轮副几何参数的合理选择问题。该优化模型的目标函数为内齿轮副的啮合效率，设计变量为外、内齿抡的变位系数Ｘ＿１、Ｘ＿２和齿顶高系数ｈ＊＿ｎ．以保证一定的重合度、齿顶厚以及避免各种几何干涉为约束条件。优化方法为复合形法。最后，还编制了自动绘图程序，以便借助计算机自动显示和绘制内齿副的啮合图。     

A Novel Routing Method for Social Delay-Tolerant Networks

The lack of continuous connectivity and a complete path from source to destination makes node communication quite difficult in Delay-Tolerant Networks(DTNs). Most studies focus on routing problems in idealized network environments without considering social properties. Communication devices are carried by individuals in many DTNs; therefore, DTNs are unique social networks to some extent. To design efficient routing protocols for DTNs, it is important to analyze their social properties. In this paper, a more accurate and comprehensive metric for detecting the quality of the relationships between nodes is proposed, by considering the contact time, contact frequency, and contact regularity. An overlapping hierarchical community detection method is designed based on this new metric, and a tree structure is built. Furthermore, we exploit the overlapping community structure and the tree structure to provide message-forwarding paths from the source node to the destination node.The simulation results show that our Routing method based on Overlapping hierarchical Community Detection(ROCD) achieves better delivery rate than SimBet and Bubble Rap, the classic routing protocols, without affecting the average delay.     

具有可变时滞的随机系统的指数稳定性

研究了具可变时滞的随机系统ｄｘ（ｔ）＝［Ｆ（ｔ,ｘ（ｔ）,ｘ（ｔ－δ１（ｔ）））＋Δｆ（ｔ,ｘ（ｔ）,ｘ（ｔ－δ２（ｔ）））］ｄｔ＋ｇ（ｔ,ｘ（ｔ）,ｘ（ｔ－δ３（Ｔ）））ｄｗ（ｔ）的ｐ阶均值指数稳定性与几乎必然指数稳定性,引入对应的随机系统（无时滞与扰动）ｄｘ（ｔ）＝ｆ（ｔ,ｘ（ｔ）,ｘ（ｔ））ｄｔ＋ｇ（ｔ,ｘ（ｔ）,ｘ（ｔ））ｄｗ（ｔ）并假设它是指数稳定的,应用Ｒａｚｕｍｉｋｈｉｎ技巧证明了当时滞δｉ（ｔ）（ｉ＝１,２,３）与扰动Δｆ充分小时,原随机时滞系统仍指数稳定．     

平面上点与多边形包含关系的Q算法

分析了用夹角和判别法计算平面上点与多边形的包含关系后,指出了参数的选择是影响包含关系计算的重要原因之一,在此基础上,提出了以矢量和为基的Ｑ函数替代角度和进行包含关系计算的方法,研究了表明,矢量和为基的Ｑ算法是可靠的,且有较高的计算效率。     

两个Toeplitz矩阵(或Hankel矩阵)相乘的快速算法

本文给出了两个n阶Toeplitz矩阵(或Hankcl矩阵)相乘以及Toeplitz矩阵与Hankel矩阵相乘的快速算法,这些算法的计算复杂性都为6n~2+O(nlog_2n)。     

Effect of slag composition on the cleanliness of 28MnCr5 gear steel in the refining processes

The equilibrium reaction between CaO—Al₂O₃—SiO₂—MgO slag and 28MnCr5 molten steel was calculated to obtain the suitable slag composition which is effective for decreasing the oxygen content in molten steel. The dissolved oxygen content [O] in molten steel under different top slag conditions was calculated using a thermodynamic model and was measured using an electromotive force method in slag–steel equilibrium experiments at 1873 K. The relations among [O], the total oxygen content (T.O), and the composition of the slag were investigated. The experimental results show that both [O] and T.O decrease with decreasing SiO₂ content of the slag and exhibit different trends with the changes in the CaO/Al₂O₃ mass ratio of the slag. Increasing the CaO/Al₂O₃ mass ratio results in a decrease in [O] and an increase in T.O. To ensure that T.O ≤ 20 ppm and [O] ≤ 10 ppm, the SiO₂ content should be controlled to <5wt%, and the CaO/Al₂O₃ mass ratio should be in the range from 1.2 to 1.6.     

Analysis of the formation conditions and characteristics of interphase and random vanadium precipitation in a low-carbon steel during isothermal heat treatment

The characteristics of nanosized precipitates in steels depend on the heat-treatment parameters. The effects of characteristics of vanadium precipitates formed during isothermal heat treatment on the hardness of the ferrite matrix in low-carbon vanadium-alloyed steel were investigated through analysis of transmission electron microscopy images and microhardness measurements. The results show that, during isothermal holding in the temperature range from 675 to 750℃, only interphase precipitation occurs, whereas only random precipitation occurs in the ferrite matrix during holding at 600℃. Furthermore, during isothermal heat treatment between 600 and 675℃, both random and interphase precipitates occurred in the ferrite. Nanoscale vanadium carbides with different atomic ratios of vanadium (V) and carbon (C) were the dominant precipitates in the random and interphase precipitates. The sizes of random precipitation carbides were smaller than those of interphase ones. Also, the sample isothermally heat treated at 650℃ for 900 s exhibited a higher hardness with a narrower hardness distribution.     

Isothermal reduction kinetics and mineral phase of chromium-bearing vanadium-titanium sinter reduced with CO gas at 873-1273 K

Reduction of chromium-bearing vanadium-titanium sinter (CVTS) was studied under simulated conditions of a blast furnace, and thermodynamics and kinetics were theoretically analyzed. Reduction kinetics of CVTS at different temperatures was evaluated using a shrinking unreacted core model. The microstructure, mineral phase, and variation of the sinter during reduction were observed by X-ray diffraction, scanning electron microscopy, and metallographic microscopy. Results indicate that porosity of CVTS increased with temperature. Meanwhile, the reduction degree of the sinter improved with the reduction rate. Reduction of the sinter was controlled by a chemical reaction at the initial stage and inner diffusion at the final stage. Activation energies measured 29.22-99.69 kJ/mol. Phase transformations in CVTS reduction are as follows:Fe₂O₃→Fe₃O₄→FeO→Fe; Fe₂TiO₅→Fe₂TiO₄→FeTiO₃; FeO·V₂O₃→V₂O₃; FeO·Cr₂O₃→Cr₂O₃.     

KHz—GHz传输线变压器的原理设计及应用

在移动通信和其他一些电子设备上都对电路提出了宽带的要求，其中就常常要用到有效的阻抗匹配变压器，理论表明传输线变压器可以实现多种阻抗变换比，并且在很宽的频带上，从几十ＫＨｚ到几千ＭＨｚ都有良好的宽带阻抗匹配特性。传输线变压器体积可以被做得很小，通过使用铁氧体磁环可以得到很好的电路特性。     

230t钢包搅拌效果和去夹杂水模型研究

以某钢厂230 t钢包为研究对象,通过实验水模型对现场生产过程的模拟,研究底吹透气元件的布置方式和吹氩流量对搅拌效果和夹杂物去除率的影响.结果表明,双透气元件吹氩优于单透气元件吹氩搅拌效果,0.6R-γ双透气元件布置方式最佳,混匀时间随吹气量和透气元件夹角的增大而减少;夹杂物的去除率取决于吹氩量和吹氩时间,在0.2～0.8 L/min吹气量下,处理时间为0～4 min时夹杂物去除效果最好,5～8 min时可去除大部分夹杂物,24 min左右可去除所有夹杂物.