Effect of particle size distribution on the microstructure,texture,and mechanical properties of Al–Mg–Si–Cu alloy

The effect of particle size distribution on the microstructure,texture,and mechanical properties of Al–Mg–Si–Cu alloy was investigated on the basis of the mechanical properties,microstructure,and texture of the alloy.The results show that the particle size distribution influences the microstructure and the final mechanical properties but only slightly influences the recrystallization texture.After the pre-aging treatment and natural aging treatment(T4 P treatment),in contrast to the sheet with a uniform particle size distribution,the sheet with a bimodal particle size distribution of large constituent particles and small dispersoids exhibits higher strength and a somewhat lower plastic strain ratio(r) and strain hardening exponent(n).After solution treatment,the sheet with a bimodal particle size distribution of large constituent particles and small dispersoids possesses a finer and slightly elongated grain structure compared with the sheet with a uniform particle size distribution.Additionally,they possess almost identical weak recrystallization textures,and their textures are dominated by CubeND {001}310 and P {011}122 orientations.     

Thermal performance and reduction kinetic analysis of cold-bonded pellets with CO and H_2 mixtures

Cold-bonded pellets, to which a new type of inorganic binder was applied, were reduced by H2–CO mixtures with different H2/CO molar ratios(1:0, 5:2, 1:1, 2:5, and 0:1) under various temperatures(1023, 1123, 1223, 1323, and 1423 K) in a thermogravimetric analysis apparatus. The effects of gas composition, temperature, and binder ratio on the reduction process were studied, and the microstructure of reduced pellets was observed by scanning electron microscopy–energy-dispersive spectrometry(SEM-EDS). The SEM-EDS images show that binder particles exist in pellets in two forms, and the form that binder particles completely surround ore particles has a more significant hinder effect on the reduction. The reduction equilibrium constant, effective diffusion coefficient, and the reaction rate constant were calculated on the basis of the unreacted core model, and the promotion effect of temperature on reduction was further analyzed. The results show that no sintering phenomenon occurred at low temperatures and that the increasing reaction rate constant and high gas diffusion coefficient could maintain the promotion effect of temperature; however, when the sintering phenomenon occurs at high temperatures, gas diffusion is hindered and the promotion effect is diminished. The contribution of the overall equilibrium constant to the promotion effect depends on the gas composition.     

Damage evolution and failure mechanism of thermal barrier coatings under Vickers indentation by using acoustic emission technique

Acoustic emission(AE) technique was adopted to monitor the damage evolution of air plasma-sprayed(APS) yttria-partially-stabilized zirconia(YSZ) thermal barrier coatings(TBCs) during instrumented indentation testing, and then the failure mechanisms were investigated by cluster analysis and wavelet transform methods.The results of cluster analysis showed that there were three classes associated with distinct failure types for the 8YSZ coatings under Vickers indentation. Based on wavelet transform, these three clusters could be clearly distinguished from their dominant frequency bands, which were concentrated on levels A5(0–156.25 kHz), D5(156.25–312.5 kHz) and D4(312.5–625 kHz), respectively. Thus, the failure mechanism of 8YSZ coatings under Vickers indentation could be clarified by the distribution of different failure types in indentation depth. To sum up, as indentation load increases, the 8YSZ coatings can accommodate the indenter by elastic or little plastic deformation, microcracks propagation and then debonding at the splat boundaries. By comparing the distribution of AE signals induced by different failure types in indentation depth for samples with different thermal exposure time, it can be inferred that thermal exposure treatment can accelerate the degradation of APS 8YSZ TBCs.     

WO3 nanoflakes decorated with CuO clusters for enhanced photoelectrochemical water splitting

The low quantum efficiency arising from poor charges transfer and insufficient light absorption is one of the critical challenges toward achieving highly efficient water splitting in photoelectrochemical cells. Three dimensions(3D) structures and heterojunctions have received intensive research interests recent years due to their excellent ability to separate photo-generated charges as well as the enhanced light harvesting property. Herein,3 D Cu O/WO_3 structure was fabricated through a facile solvothermal method followed by chemical bath deposition. The loading of Cu O clusters on WO_3 nanoflake arrays results in a much improved photocurrent density compared with that of pristine WO_3 nanoflake arrays, which reaches 1.8 m A/cm2 at 1.23 V vs. the reversible hydrogen electrode. The electrochemical impedance spectroscopy measurement demonstrates that the improved performance of Cu O/WO_3 electrode is attributed to the accelerated charge transfer kinetics as a result of the desirable band alignment in Cu O/WO_3 heterojunction. This work demonstrates a facile strategy to construct superior WO_3 electrode, which will ultimately allow for efficient storage of solar energy into hydrogen.     

Effect of cold rolling process on microstructure and mechanical properties of high strength β titanium alloy thin sheets

The microstructure and mechanical properties of Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe high strength titanium alloy sheets prepared by unidirectional cold rolling and two-step cross cold rolling were investigated. Results showed that the β phase grains were refined significantly by cold rolling followed by solution treatment for a short time.Compared to unidirectional cold rolling, the short time solution treatment after two-step cross rolling could significantly reduce the non-uniformity of the microstructure of the alloy sheets. After aging treatment at 550 ℃,the anisotropy of the mechanical properties still existed in the unidirectional rolled sheets, and the tensile strength was highest along the rolling direction. After solution and aging treatment, the anisotropy of the mechanical properties of the two-step cross rolling process sheet was not obvious than unidirectional cold rolling,and alloy had good strength and plasticity matching.     

The hidden disintegration of cluster heterogeneity in Fe-based glass-forming alloy melt

The evolution of liquid metal at high temperature is known much less than their solid states. This is partially due to that the message concerning clusters, metastable phase or heterogeneity in liquid is usually too slight to be traced. Here, we shed some light on the nature of structural evolution of Fe-based glass-forming alloy during overheating process by the investigation of high-temperature melt viscometry and first principles simulations. It was found that a structural transition around 1400 ℃ occurred in the melts of initial homogeneous ingot, heterogeneous ingot and amorphous ribbons jointly, and was confirmed by the results from differential scanning calorimeter(DSC), and ab initio molecular dynamics(AIMD). Combining these results with Fe-Si-B ternary phase diagram and the melting characteristics of Fe-B compounds, it is safe to conclude that the disintegration of Fe_2B type clusters to Fe_3B-type clusters leads to the observed transition. These results offer a significant reference for the preparation and property control of Fe-based amorphous alloys.     

锶的生物学效应研究进展

锶是生物有机体内必需的微量元素之一,在体内发挥着重要的生物学作用。通过探讨锶在人体内的分布与代谢,锶元素与骨质疏松症、心血管疾病、龋齿和神经兴奋的关系等5个方面锶的研究进展以及目前存在的一些问题,以期为开发含锶药物、矿泉水、保健品等产品和确定每日锶的合适摄入量提供一定的科学依据。     

用政治手段解决国际冲突的有益探索——以朝核问题六方会谈为例

中国在政治解决朝核问题的过程中扮演着作为第三方的大国斡旋者角色,从理论上讲,发挥这一角色作用有其特殊的涵义、困难性和复杂性,并因之要求中国的外交斡旋活动完成一定的调解任务。“六方会谈”是政治解决朝核问题的正确选择和有效途径,中国在促成六方会谈的成功举行并获得初步成果的过程中展示了高超的外交斡旋艺术,包括给予帮助的技术、支持冲突方互动的技术和操控技术,部分地完成了对于朝美之间冲突的调解任务。在中国积极和有效的外交斡旋努力下,朝核问题的解决沿正确的方向前行。     

胶束增敏法测定乳酸环丙沙星的含量

研究了乳酸环丙沙星(CFLX)在胶束体系中的荧光特性,发现十二烷基硫酸钠(SDS)对CFLX有较强的增敏作用,据此建立了胶束增敏荧光光谱法测定环丙沙星的新方法。其线性范围为0~2.00μg/mL,检出限为1.32 ng/mL。     

The Effectiveness of Structural Monetary Policy and Macro-Prudential Policies — Based on the DSGE Model That Includes Bank Heterogeneous Credit

Journal of Systems Science and Complexity - Structural monetary policy and macro-prudential policies are important parts of the policy system of the People’s Bank of China. By constructing a...