RNAi-mediated gene silencing in non-human primates

The opportunity to harness the RNA interference (RNAi) pathway to silence disease-causing genes holds great promise for the development of therapeutics directed against targets that are otherwise not addressable with current medicines. Although there are numerous examples of in vivo silencing of target genes after local delivery of small interfering RNAs (siRNAs), there remain only a few reports of RNAi-mediated silencing in response to systemic delivery of siRNA, and there are no reports of systemic efficacy in non-rodent species. Here we show that siRNAs, when delivered systemically in a liposomal formulation, can silence the disease target apolipoprotein B (ApoB) in non-human primates. APOB-specific siRNAs were encapsulated in stable nucleic acid lipid particles (SNALP) and administered by intravenous injection to cynomolgus monkeys at doses of 1 or 2.5 mg kg(-1). A single siRNA injection resulted in dose-dependent silencing of APOB messenger RNA expression in the liver 48 h after administration, with maximal silencing of >90%. This silencing effect occurred as a result of APOB mRNA cleavage at precisely the site predicted for the RNAi mechanism. Significant reductions in ApoB protein, serum cholesterol and low-density lipoprotein levels were observed as early as 24 h after treatment and lasted for 11 days at the highest siRNA dose, thus demonstrating an immediate, potent and lasting biological effect of siRNA treatment. Our findings show clinically relevant RNAi-mediated gene silencing in non-human primates, supporting RNAi therapeutics as a potential new class of drugs.     

高容量温盘驱动器伺服码同步时钟录写技术

提出了可变频时钟写入方法和锁相环倍频时钟写入方法，给出了这两种写入法的读／写电路，并分析了其性能。结果证明，可变频时钟写入方法电路简单，刻写时钟周期短；锁相环倍频时钟写入过程较前者长，但其频率范围容易调整。两者均适合高密度小型温盘的时钟录写。     

Inactivation of the apoptosis effector Apaf-1 in malignant melanoma

Metastatic melanoma is a deadly cancer that fails to respond to conventional chemotherapy and is poorly understood at the molecular level. p53 mutations often occur in aggressive and chemoresistant cancers but are rarely observed in melanoma. Here we show that metastatic melanomas often lose Apaf-1, a cell-death effector that acts with cytochrome c and caspase-9 to mediate p53-dependent apoptosis. Loss of Apaf-1 expression is accompanied by allelic loss in metastatic melanomas, but can be recovered in melanoma cell lines by treatment with the methylation inhibitor 5-aza-2'-deoxycytidine (5aza2dC). Apaf-1-negative melanomas are invariably chemoresistant and are unable to execute a typical apoptotic programme in response to p53 activation. Restoring physiological levels of Apaf-1 through gene transfer or 5aza2dC treatment markedly enhances chemosensitivity and rescues the apoptotic defects associated with Apaf-1 loss. We conclude that Apaf-1 is inactivated in metastatic melanomas, which leads to defects in the execution of apoptotic cell death. Apaf-1 loss may contribute to the low frequency of p53 mutations observed in this highly chemoresistant tumour type.     

Dynamic Analysis of Cable Roofs Under Transient Wind:A Comparison Between Time Domain and Frequency Domain Approaches

At present, high-speed computing capabilities and advanced nonlinear dynamic finite element procedures enable detailed dynamic analysis of cable structures. Although deterministic approaches require considerable analysis time and effort in relation to modeling, running, and data processing, they seem to be the only alternative to obtain high accuracy. Detailed dynamic analysis of cable roof networks is sophisticated and requires advanced modeling expertise. This paper presents a comparison between detailed nonlinear dynamic analysis and a simplified frequency domain approach to estimate the maximum probable response of weakly nonlinear cable roofs. The approach can be considered as alternative to detailed time-domain analysis in the preliminary design phase, or can be used to validate results obtained from more elaborated numerical models. The proposed method is illustrated with two examples of cable net roofs that were also analysed in the time domain.     

嵌套式建模支持

阐述了人的建模思维机制。引入等价关系和划分作为问题粒度研究的基础，定义了逆商集，使之与商集一起，构成了对问题不同粒度的完整描述，并讨论了粒度的性质，借助拓扑分析，给出了问题可分解、可细化和粗化、细化等一系列定义，在问题簇和模型簇概念的基础上，提出了嵌套式建模（支持）作为面向复杂系统的建模支持方法论，具体给出了其实施步骤，这是一个人机交互的启发式过程，将嵌套式建模与传统式建模作了比较，此外还作了若干说明。     

Optimization of wear parameters of binary Al-25Zn and Al-3Cu alloys using design of experiments

Zinc-aluminum alloys have been used as bearing materials in the past. In recent years, binary Al-Zn alloys and Al-Zn-Cu alloys are being used as an alternative to the Zn-Al alloys for bearing applications. In this study, both binary Al-25Zn and Al-3Cu were prepared using stir casting process. Homogenization of the as-cast alloys was performed at 350℃ for 8 h and then, the alloys were furnace-cooled to 50℃. The homogenization led to the removal of the dendritic structure of the as-cast alloys. After homogenization, wear parameters optimization was carried out using Taguchi technique. For this purpose, L₉ orthogonal array was selected, and the control parameters selected are load, velocity, and sliding distance. The optimum parametric condition was obtained using signal-to-noise (S/N) ratio analysis, and specific wear rate (SWR) is the selected response. The "smaller-the-better" is the goal of the experiment for S/N ratio analysis. After the optimization, confirmation tests were carried out using analysis of variance (ANOVA) from the developed regression equation. Finally, wear mechanism studies were conducted using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) images.     

以分析法比较流体的换热性能

基于换热过程中的损失率能定量地反映该过程中流体的传热与流动的综合性能这一特性，借助换热过程的损失率方程，分析比较了几种流体工质在不同换热方式下的综合特性。比较结果表明，液体（如水）有远优于气体（如空气）的流动与传热的综合性能，且随着流体温度的升高其优势更为明显。同时表明分析法在定量评价换热工质性能的突出特点及工程上的应用价值。     

含镍磁黄铁矿硝酸浸出液中硝酸镁与硫酸镁的分离

硝酸催化浸出是处理金属硫化物的有效方法。用这种方法在较低温度和氧压下成功地处理了含镍磁黄铁,但矿石中的氧化镁与硫酸和硝酸反应生成硫酸镁和硝酸镁,后者消耗了大量硝酸;因而需要分离硫酸镁,返回使用硝酸镁才能保证浸出过程经济地进行。本研究测定了Mg(NO_3)_2-MgSO_4-H_2O系在343K,308K,以及Mg(NO_3)_2-MgSO_4-C_2H_5OH-H_2O系在298K的平衡相图。结果表明,蒸发结晶法及乙醇结晶法均能有效地分离出硫酸镁,但后者更为节能。加10％乙醇即可使硫酸镁与硝酸镁较好分离。     

凸曲面平头立铣刀刀位轨迹的计算方法

采用球面刀在三坐标数控机床上加工具有凸曲面工位的零部件时，往往会导致几何形状误差，对此，运用点涉法原理，推导出在凸曲面上确定平头立铣刀五轴和三轴数控联动加工刀位轨迹的计算方法。     

Myeloid leukaemia inhibitory factor maintains the developmental potential of embryonic stem cells

Embryonic stem (ES) cells, the totipotent outgrowths of blastocysts, can be cultured and manipulated in vitro and then returned to the embryonic environment where they develop normally and can contribute to all cell lineages. Maintenance of the stem-cell phenotype in vitro requires the presence of a feeder layer of fibroblasts or of a soluble factor, differentiation inhibitory activity (DIA) produced by a number of sources; in the absence of DIA the ES cells differentiate into a wide variety of cell types. We recently noted several similarities between partially purified DIA and a haemopoietic regulator, myeloid leukaemia inhibitory factor (LIF), a molecule which induces differentiation in M1 myeloid leukaemic cells and which we have recently purified, cloned and characterized. We demonstrate here that purified, recombinant LIF can substitute for DIA in the maintenance of totipotent ES cell lines that retain the potential to form chimaeric mice.