低温等离子体促进水稻种子生长效应及NIR光谱分析

使用亚大气压下介质阻挡放电低温等离子体,对水稻糙米种子进行处理,不同气体、功率、处理时间下观测低温等离子体对糙米生长活力的影响;采用近红外光谱技术对处理后的糙米进行初步的理化性质分析.结果显示:空气等离子体放电对糙米生长活力的促进要优于氮气等离子体放电,空气实验组的最佳处理条件为(360W,5min),而氮气实验组的最佳处理条件为(360W,10min).另外,近红外光谱的主成分分析结果显示空气实验组(360W,5min)和氮气实验组(360W,10min)的糙米光谱与对照组光谱均存在明显差异.低温等离子体对水稻糙米种子的生长活力具有促进作用,能利用近红外光谱技术对作用效果进行初步评估.     

Effect of cold rolling process on microstructure and mechanical properties of high strength β titanium alloy thin sheets

The microstructure and mechanical properties of Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe high strength titanium alloy sheets prepared by unidirectional cold rolling and two-step cross cold rolling were investigated. Results showed that the β phase grains were refined significantly by cold rolling followed by solution treatment for a short time.Compared to unidirectional cold rolling, the short time solution treatment after two-step cross rolling could significantly reduce the non-uniformity of the microstructure of the alloy sheets. After aging treatment at 550 ℃,the anisotropy of the mechanical properties still existed in the unidirectional rolled sheets, and the tensile strength was highest along the rolling direction. After solution and aging treatment, the anisotropy of the mechanical properties of the two-step cross rolling process sheet was not obvious than unidirectional cold rolling,and alloy had good strength and plasticity matching.     

Enhanced performance of nano-sized SiC reinforced Al metal matrix nanocomposites synthesized through microwave sintering and hot extrusion techniques

In the present study, nano-sized SiC (0, 0.3, 0.5, 1.0 and 1.5 vol%) reinforced aluminum (Al) metal matrix composites were fabricated by microwave sintering and hot extrusion techniques. The structural (XRD, SEM), mechanical (nanoindentation, compression, tensile) and thermal properties (co-efficient of thermal expansion- CTE) of the developed Al-SiC nanocomposites were studied. The SEM/EDS mapping images show a homogeneous distribution of SiC nanoparticles into the Al matrix. A significant increase in the strength (compressive and tensile) of the Al-SiC nanocomposites with the addition of SiC content is observed. However, it is noticed that the ductility of Al-SiC nanocomposites decreases with increasing volume fraction of SiC. The thermal analysis indicates that CTE of Al-SiC nanocomposites decreases with the progressive addition of hard SiC nanoparticles. Overall, hot extruded Al 1.5 vol% SiC nanocomposites exhibited the best mechanical and thermal performance as compared to the other developed Al-SiC nanocomposites.     

Historical review and redescription of three poorly known species of the catfish genus Trichomycterus from south-eastern Brazil (Siluriformes: Trichomycteridae)

ABSTRACT

This study is primarily directed to the most poorly known species of the genus Trichomycterus, comprising five nominal species (T. florensis, T. immaculatus, T. nigricans, T. paquequerensis and T. santaeritae) endemic to south-eastern Brazil. One of them, T. nigricans, is the type species of the genus, involved in taxonomic problems for over 150 years. A detailed historical review, accompanied by examination of type specimens and recent collections, revealed that the correct type locality of T. nigricans is in the vicinity of Rio de Janeiro, not Santa Catarina as commonly appears in the literature; specimens previously misidentified as T. nigricans from Santa Catarina belong to a possibly undescribed species of the genus Cambeva; T. paquequerensis is a synonym of T. immaculatus, and T. florensis is a synonym of T. santaeritae; and the hypothesis that T. santaeritae is closely related to the Amazon Sarcoglanidinae is refuted. The three valid species are redescribed. These species are members of a clade also including T. caipora that is highly supported by molecular data, diagnosed by a pronounced posterior maxillary process and caudal fin emarginate at least in larger specimens. A subclade comprising T. caipora, T. nigricans and T. santaeritae is diagnosed by a long maxilla and a bifid anterior extremity of hypobranchial 3.     

Structural,morphological, and optical properties of tin(Ⅳ) oxide nanoparticles synthesized using Camellia sinensis extract: a green approach

Tin oxide (SnO2) nanoparticles were cost-effectively synthesized using nontoxic chemicals and green tea (Camellia sinensis) extract via a green synthesis method.The structural properties of the obtained nanoparticles were studied using X-ray diffraction,which indicated that the crystallite size was less than 20 nm.The particle size and morphology of the nanoparticles were analyzed using scanning electron microscopy and transmission electron microscopy.The morphological analysis revealed agglomerated spherical nanoparticles with sizes varying from 5 to 30 nm.The optical properties of the nanoparticles' band gap were characterized using diffuse reflectance spectroscopy.The band gap was found to decrease with increasing annealing temperature.The O vacancy defects were analyzed using photoluminescence spectroscopy.The increase in the crystallite size,decreasing band gap,and the increasing intensities of the UV and visible emission peaks indicated that the green-synthesized SnO2 may play future important roles in catalysis and optoelectronic devices.     

Fabrication of an r-Al2Ti intermetallic matrix composite reinforced with α-Al2O3 ceramic by discontinuous mechanical milling for thermite reaction

In this study, a powder mixture with an Al/TiO2 molar ratio of 10/3 was used to form an r-Al2Ti intermetallic matrix composite (IMC) reinforced withα-Al2O3 ceramic by a novel milling technique, called ...