气刀操作条件对密相栓流气力输送的影响

以高密度聚乙烯为对象,进行了密相栓流气力输送的中试研究,结果表明:输送压力、气刀的操作周期、充气时间与断气时间的比值对输送气速、输送能力、固气比等均有较大的影响.     

增速箱系统动态激励下的响应分析

齿轮啮合动态激励是齿轮系统产生振动和噪声的基本原因，齿轮系统在内部动态激励下的响应分析，对齿轮系统的设计和使用具有重要的意义。针对增速箱系统，采用三维接触有限元法得出啮合齿对的时变刚度曲线，根据齿轮精度级确定的齿轮偏差模拟得出齿面误差曲线，得出了刚度激励和误差激励。应用Ⅰ-DEAS软件建立了增速箱有限元动力分析模型，分析计算出了增速箱的固有频率和箱体、传动轴的动态响应。结果表明，增速箱系统在使用中不会引起共振，且振幅不大，能满足系统的使用要求。     

^4He^＋离子在C和Cu上能量沉积系数的理论计算

利用部分地考虑能量损失的角关联的改进离子输运双群模型，计算了＾４Ｈｅ＾＋离子垂直入射到Ｃ和Ｃｕ上的能量沉积参数，改进了早期的离子输运双群模型。     

徐州红色鲢鱼的初步研究

对红色鲢鱼和白色鲢鱼进行比较研究,结果表明,除体色差别外,两者在体形、咽骨咽齿、消化管相对长度、鳍式和鳞式等方面均无显著差异。可以认为红鲢是白鲢的红色变异体,并对色变的原因做了些推测。     

氯化镁用于染料废水的脱色研究

研究了MgCl_2处理若干种类的活性染料及分散染料的脱色效果,比较了MgCl_2/Ca(OH)_2、Al_2(SO_4)_3.PAC、FeSO_4/Ca(OH)_2的脱色效果。探讨了MgCl_2的脱色机理。实验结果表明,MgCl_2的脱色效果与染料种类、脱色的pH条件,脱色剂的用量有关;MgCl_2的脱色率随pH值升高而增加,对于活性染料废水,当pH=12.5左右时脱色率达最佳;对于分散染料废水,pH=12.0左右时脱色率达最佳;MgCl_2/Ca(OH)_2的脱色效果优于 PAC、Al_2(SO_4)_3、FeSO_4/Ca(OH)_2的脱色效果;MgCl_2的脱色机理为:(1)Mg~(2+)能与含有—OH,—SO_3H、—COOH基因的染料化合物起反应,生成稳定的螯合物,该螯合物在碱性条件下通过混凝作用从水中分离出来;(2)MgCl_2在高pH值下依靠水解生成的Mg(OH)_2胶体沉淀物对染料分子的吸附和卷扫沉降作用达到脱色目的。     

铁路沿线山岬对电波传播特性影响分析

利用波导分析理论及介质表面阻抗的概念,分析了电波在非理想表面的山岬中的传播特性．同时,对频率为９００ ＭＨｚ 的电波在非理想表面的矩形山岬内的传播特性进行了理论计算与分析．计算分析结果表明,环境媒质的相对介电常数对电波传播特性的影响较其它环境参数对电波传播特性的影响要明显得多．非理想表面介质增加了电波传播能量的损耗,缩短了纵向传播距离．在传播的横截面上,水平方向的电场衰减呈现波动分布．     

Perceiving distance accurately by a directional process of integrating ground information

By itself, the absolute distance of an object cannot be accurately judged beyond 2-3 m (refs 1-3). Yet, when it is viewed with reference to a flat terrain, humans accurately judge the absolute distance of the object up to 20 m, an ability that is important for various actions. Here we provide evidence that this is accomplished by integrating local patches of ground information into a global surface reference frame. We first show that restricting an observer's visual field of view to the local ground area around the target leads to distance underestimation, indicating that a relatively wide expanse of the ground surface is required for accurate distance judgement. Second, as proof of surface integration, we show that even with the restricted view, the observer can accurately judge absolute distance by scanning local patches of the ground surface, bit by bit, from near to far, but not in the reverse direction. This finding also reveals that the surface integration process uses the near-ground-surface information as a foundation for surface representation, and extrapolation to the far ground surface around the target for accurate absolute distance computation.     

Crystal structure of spinach major light-harvesting complex at 2.72 A resolution

The major light-harvesting complex of photosystem II (LHC-II) serves as the principal solar energy collector in the photosynthesis of green plants and presumably also functions in photoprotection under high-light conditions. Here we report the first X-ray structure of LHC-II in icosahedral proteoliposome assembly at atomic detail. One asymmetric unit of a large R32 unit cell contains ten LHC-II monomers. The 14 chlorophylls (Chl) in each monomer can be unambiguously distinguished as eight Chla and six Chlb molecules. Assignment of the orientation of the transition dipole moment of each chlorophyll has been achieved. All Chlb are located around the interface between adjacent monomers, and together with Chla they are the basis for efficient light harvesting. Four carotenoid-binding sites per monomer have been observed. The xanthophyll-cycle carotenoid at the monomer-monomer interface may be involved in the non-radiative dissipation of excessive energy, one of the photoprotective strategies that have evolved in plants.     

线型聚能装药射流形成过程的数值模拟

聚能射流形式过程的研究对于正确认识射流侵彻理论具有重要的意义。根据线型聚能药的结构特点,利用DYNA3D显式有限元程序对线型聚能射流的形成过程进行了数值模拟。模型探讨了线型聚能装药爆炸的诸多重要物理特性,如药型罩的压垮、射流形成和拉伸以及体杵体的“体缩”现象。还分析了线型聚能射流形成过程中速度、密度、温度等参数的分布特性,得出了射流有逆向速度梯度和杵体存在“体缩”现象听结论,其结果与现有的理论分成果基本一致。     

微重力条件下气／液两相流压降实验研究

利用俄罗斯IL-76失重飞机对微重力条件下方形截面管道内的水/气两相流压降进行了实验研究．利用本次微重力气／液两相流压降实验结果对一些目前常用的基于地面常重力实验结果的两相流压降预测模型(均相模型、Lockhart-Martinelli—Chisholm模型和Friedel模型)在微重力条件下的适用性进行了评估．比较发现,均相模型和Lockhart-Martinelli—Chisholm模型预测结果和实验数据差异很大;而Friedel模型的预测结果尽管也与实验数据有着明显的差别,但在这些模型中是误差最小的．因此,可以利用Friedel模型来对微重力气／液两相流压降进行初步预估,而新的、更精确的模型将依赖于更有物理意义的分析方法及不同重力条件下气／液两相流压降实验的结果．