Armchir型氮化硼纳米管的Kekule结构计数

介绍了带半-B12N12帽的armchair型单壁氮化硼纳米管(BN-SWNT),并对其Kekule结构的个数进行了计算.通过使用定位配置技术和特殊的编码方法,建立了关于Kekule计数K的递推公式.数值计算结果表明,与zigzag型类似,armchair型氮化硼纳米管的Kekule计数也随着管子中间层数的增加呈指数增长.     

制冷机直接冷却高温超导磁体的实验研究

利用5W／20K GM制冷机对高温超导磁体(HTS-SMES)进行了直接冷却实验研究，HTS磁体用Bi-2223带材绕制，内径72mm，外径112mm，高110mm,高温超导磁体经过16h冷却，达到25．4K低温温度.磁体轴向温差为2．8K，径向温差小于1K．实验表明，设计的高温超导磁体直接冷却结构和实验装置是可行的,为高温超导磁储能磁体直接冷却取得了理论分析依据和买验数据.     

随机利率下时间盈余模型的破产概率

本文首先介绍了文献[3]在一般化破产模型基础上构造的时间盈余模型，并进一步讨论了此模型下的具有随机利率因素的破产概率，使得相应的破产概率更具实际意义。     

谈地理课的兴趣培养

本文从地理科学知识的角度,提出了学习兴趣在教学过程中的动力问题,并从心理学角度提出了解决的办法,为怎样学好地理科学知识提出了理论性的探讨。     

A Generic TC-Based Method to Find the Weakness in Different Phases of Masking Schemes

Masking is one of the most commonly used Side-Channel Attack(SCA) countermeasures and is built on a security framework, such as the ISW framework, and ensures theoretical security through secret sharing.Unfortunately, the theoretical security cannot guarantee practical security, because several possible weaknesses may exist in the actual implementation. These weaknesses likely come from the masking schemes or are introduced by the implementation methods. Finding the possible weakness of the masking scheme is an interesting and important issue for real applications. In this paper, the possible weaknesses for masking schemes in FieldProgrammable Gate Array(FPGA) design are discussed. It was found that the combinational circuit is the key to the security of masking schemes. The Toggle Count(TC) method and its extension are utilized to evaluate the security of masking schemes in the design phase and the implementation phase separately. Comparing different logic-level simulators for the Xilinx FPGA platform, the behavioral and post-translate simulations are considered as the analysis method in the design phase, while the post-map and the post-route simulations are used to find the weakness during the implementation phase. Moreover, a Standard Delay Format(SDF) based improvement scheme is proposed to significantly increase the effectiveness of the TC model.     

Shear-thickening behavior of Fe-ZSM5 zeolite slurry and its removal with alumina/boehmites

A cryogenic scanning electron microscopy (cryo-SEM) technique was used to explore the shear-thickening behavior of Fe-ZSM5 zeolite pastes and to discover its underlying mechanism. Bare Fe-ZSM5 zeolite samples were found to contain agglomerations, which may break the flow of the pastes and cause shear-thickening behaviors. However, the shear-thickening behaviors can be eliminated by the addition of halloysite and various boehmites because of improved particle packing. Furthermore, compared with pure Fe-ZSM5 zeolite samples and its composite samples with halloysite, the samples with boehmite (Pural SB or Disperal) additions exhibited network structures in their cryo-SEM images; these structures could facilitate the storage and release of flow water, smooth paste flow, and avoid shear-thickening. By contrast, another boehmite (Versal 250) formed agglomerations rather than network structures after being added to the Fe-ZSM5 zeolite paste and resulted in shear-thickening behavior. Consequently, the results suggest that these network structures play key roles in eliminating the shear-thickening behavior.     

Corrosion behavior of high-strength spring steel for high-speed railway

The corrosion resistance and evolution of corrosion products in medium-carbon high-strength spring steels were investigated in a neutral salt spray (5wt% NaCl solution). A formation model of γ-FeOOH and a transformation model describing the conversion of γ-FeOOH to α-FeOOH were constructed. The results indicated that, at the initial corrosion stage, the corrosion resistance was gradually improved with the addition of Cr; however, with the addition of alloying element V, the corrosion resistance decreased. These results were attributed mainly to the initial corrosion stage being closely related to the matrix microstructure parameters such as grain-boundary character and dislocation density. After the rust layer was formed at a later corrosion stage, the corrosion resistance was reinforced with the addition of Cr and V because Cr strongly influenced the composition, structure, and morphology of the corrosion products. The results presented herein show that Cr was conducive to the transformation of γ-FeOOH into α-FeOOH. Moreover, V and Cr exhibited obvious synergy and were enriched in the inner layer of the corrosion products.     

Mechanical characterization and strain-rate sensitivity measurement of Ti- 7333 alloy based on nanoindentation and crystal plasticity modeling

The relationship between crystal orientations and meso-mechanical properties of β phase Ti-7333 titanium was investigated through the combination of nanoindentation experiments and simulation. The crystal plasticity finite element(CPFE) model for nanoindentation of single body-centered cubic crystal was established based on the experimental data. And the crystal plasticity constitutive law was implemented to simulate the nanoindentation process, obtaining satisfied results with an acceptable error. From the simulated pileup morphology patterns with different crystal orientations, it was found that the β phase experienced a symmetrical and orientation-related deformation process. Meanwhile, the strain-rate sensitivity(SRS) of β phase was investigated through nanoindentation tests based on continuous stiffness measurement(CSM) under different strain rates,varying between 0.2, 0.05 and 0.01 s~(-1). Two grains with different orientations exhibited similar SRS exponents,m, calculated from the experimental results.     

WO3 nanoflakes decorated with CuO clusters for enhanced photoelectrochemical water splitting

The low quantum efficiency arising from poor charges transfer and insufficient light absorption is one of the critical challenges toward achieving highly efficient water splitting in photoelectrochemical cells. Three dimensions(3D) structures and heterojunctions have received intensive research interests recent years due to their excellent ability to separate photo-generated charges as well as the enhanced light harvesting property. Herein,3 D Cu O/WO_3 structure was fabricated through a facile solvothermal method followed by chemical bath deposition. The loading of Cu O clusters on WO_3 nanoflake arrays results in a much improved photocurrent density compared with that of pristine WO_3 nanoflake arrays, which reaches 1.8 m A/cm2 at 1.23 V vs. the reversible hydrogen electrode. The electrochemical impedance spectroscopy measurement demonstrates that the improved performance of Cu O/WO_3 electrode is attributed to the accelerated charge transfer kinetics as a result of the desirable band alignment in Cu O/WO_3 heterojunction. This work demonstrates a facile strategy to construct superior WO_3 electrode, which will ultimately allow for efficient storage of solar energy into hydrogen.     

偶氮样品折射率变化的测量与计算

测量了偶氮染料甲基红掺杂PMM A薄膜的反射光谱,并对测量结果进行了修正.利用修正后的反射光谱进行了k-k变换,获得了样品的折射率分布.对样品进行了不同状态下吸收光谱的测量,利用k-k变换获得了样品在不同状态下折射率的变化分布.