昆嵛山珍稀濒危植物资源及保护

报道了昆嵛山21种濒危植物资源的主要形态特征、分布和保护价值,并根据昆嵛山的特点 提出了相应的保护策略.通过对这些濒危植物的调查和概括,为昆嵛山濒危植物的研究和保护提供 了基础性资料.     

正交异性钢桥面板闭口加劲肋对接焊缝疲劳性能评价

根据等效应力幅的概念,采用国内2座大桥近半年的交通数据对闭口加劲肋的疲劳性能进行评价.闭口加劲肋对接焊缝处应力影响线较短,通过车型的调查可以将车辆荷载转化为轴型荷载加载应力影响线,从而避免数值模拟实际车流.通过与我国钢桥规范推荐评价方法对比可以看出,采用统计的轴型荷载计算得到的等效应力幅小于规范评价方法得到的计算结果.并对我国钢桥规范中的损伤等效系数的取值进行了讨论.     

A Generic TC-Based Method to Find the Weakness in Different Phases of Masking Schemes

Masking is one of the most commonly used Side-Channel Attack(SCA) countermeasures and is built on a security framework, such as the ISW framework, and ensures theoretical security through secret sharing.Unfortunately, the theoretical security cannot guarantee practical security, because several possible weaknesses may exist in the actual implementation. These weaknesses likely come from the masking schemes or are introduced by the implementation methods. Finding the possible weakness of the masking scheme is an interesting and important issue for real applications. In this paper, the possible weaknesses for masking schemes in FieldProgrammable Gate Array(FPGA) design are discussed. It was found that the combinational circuit is the key to the security of masking schemes. The Toggle Count(TC) method and its extension are utilized to evaluate the security of masking schemes in the design phase and the implementation phase separately. Comparing different logic-level simulators for the Xilinx FPGA platform, the behavioral and post-translate simulations are considered as the analysis method in the design phase, while the post-map and the post-route simulations are used to find the weakness during the implementation phase. Moreover, a Standard Delay Format(SDF) based improvement scheme is proposed to significantly increase the effectiveness of the TC model.     

Shear-thickening behavior of Fe-ZSM5 zeolite slurry and its removal with alumina/boehmites

A cryogenic scanning electron microscopy (cryo-SEM) technique was used to explore the shear-thickening behavior of Fe-ZSM5 zeolite pastes and to discover its underlying mechanism. Bare Fe-ZSM5 zeolite samples were found to contain agglomerations, which may break the flow of the pastes and cause shear-thickening behaviors. However, the shear-thickening behaviors can be eliminated by the addition of halloysite and various boehmites because of improved particle packing. Furthermore, compared with pure Fe-ZSM5 zeolite samples and its composite samples with halloysite, the samples with boehmite (Pural SB or Disperal) additions exhibited network structures in their cryo-SEM images; these structures could facilitate the storage and release of flow water, smooth paste flow, and avoid shear-thickening. By contrast, another boehmite (Versal 250) formed agglomerations rather than network structures after being added to the Fe-ZSM5 zeolite paste and resulted in shear-thickening behavior. Consequently, the results suggest that these network structures play key roles in eliminating the shear-thickening behavior.     

面向产品投产比例的多Hoist调度研究

在电镀生产线上,多种不同类型的工件往往按照一定的比例关系组织生产,以应对多样化的订单需求,缩短订单交付周期,而为了克服由运输设备造成的生产瓶颈,加工设备之间的工件转运作业多采用数个自动化的Hoist(行车)来完成。针对面向产品投产比例的多Hoist调度问题,采用启发式策略实现多个不同类型工件在并行工作站上的分配,同时考虑工件加工时间窗口约束、工作站的使用能力约束以及Hoist无碰撞约束,构建了解决此类问题的混合整数规划模型。最后,以某印刷电路板制造企业的全板电镀生产实例验证了所建数学模型的实际应用价值。     

Corrosion behavior of high-strength spring steel for high-speed railway

The corrosion resistance and evolution of corrosion products in medium-carbon high-strength spring steels were investigated in a neutral salt spray (5wt% NaCl solution). A formation model of γ-FeOOH and a transformation model describing the conversion of γ-FeOOH to α-FeOOH were constructed. The results indicated that, at the initial corrosion stage, the corrosion resistance was gradually improved with the addition of Cr; however, with the addition of alloying element V, the corrosion resistance decreased. These results were attributed mainly to the initial corrosion stage being closely related to the matrix microstructure parameters such as grain-boundary character and dislocation density. After the rust layer was formed at a later corrosion stage, the corrosion resistance was reinforced with the addition of Cr and V because Cr strongly influenced the composition, structure, and morphology of the corrosion products. The results presented herein show that Cr was conducive to the transformation of γ-FeOOH into α-FeOOH. Moreover, V and Cr exhibited obvious synergy and were enriched in the inner layer of the corrosion products.     

Morphology and quantitative analysis of O phase during heat treatment of hot-deformed Ti_2AlNb-based alloy

A 1040°C-hot-deformed Ti_2AlNb-based alloy solution-treated at 950°C and aged at different temperatures was quantitatively investigated. The microstructure, size of the phase, and microhardness of the deformed alloys were measured. The results indicated that the microstructure of the deformed Ti_2AlNb-based alloy specimens comprise coarse O lath, fine O lath, equiaxed O/α_2, and acicular O phase. More O phase was generated in the deformed alloy after heat treatment because the acicular O phase was more likely to nucleate and grow along the deformation-induced crystal defects such as dislocations and subgrain boundaries. After deformation and subsequent heat treatment, the acicular O phase of the resultant alloy became finer compared to that of the undeformed alloy, and the acicular O phase became coarser and longer with the elevated aging temperature, while the width of the O lath exhibited unobvious variations. The hot deformation facilitated the dissolution of the O lath but accelerated the precipitation of the acicular O phase. When the 950°C-solution-treated deformed Ti_2AlNb-based alloy was then aged at 750°C for different periods, the phase content was nearly invariable, O and B2 phases eventually reached equilibrium, and the microstructure became stable and homogeneous.     

炸药材料特性对整体式MEFP成形的影响

为提高整体式多爆炸成形弹丸（MEFP）毁伤能力,采用LS-DYNA数值仿真软件对不同炸药材料下整体式MEFP成形过程进行了仿真研究,并对采用B炸药的战斗部进行了地面静爆验证试验,试验结果和仿真结果吻合较好.研究表明随着炸药材料密度、爆速和爆压的增加,中心弹丸速度和长径比都得到大幅提高,中心弹丸侵彻能力增强;周边弹丸外形则由球形逐渐向长杆形发展,弹丸气动性减弱.炸药材料参数与毁伤元成形参数间呈抛物线变化规律,故可根据具体目标选择合适的炸药材料,以提高对目标的毁伤概率.     

Effect of minor Sc on the microstructure and mechanical properties of AZ91 Magnesium Alloy

The as-cast and heat-treated microstructures and mechanical properties of the AZ91 magnesium alloys with and without minor Sc addition were investigated and compared in this paper. The results indicated that adding0.15–0.45 wt% Sc to the as-cast AZ91 alloy not only could modify and refine the Mg_(17)Al_(12) phase but also suppress the formation of the Mg_(17)Al_(12) phase. At the same time, the grains of the Sc-containing as-cast AZ91 alloys were also effectively refined. As a result, the mechanical properties at room temperature(RT) for the Sccontaining as-cast AZ91 alloys were effectively improved. In addition, adding 0.15–0.45 wt%Sc to the AZ91 alloy promoted the formation of the continuous precipitates(CP) during the aging treatment in spite of that the formation of the discontinuous precipitates(DP) was simultaneously suppressed. Accordingly, the Sc-containing as-aged AZ91 alloys obtained the relatively higher mechanical properties at RT than the as-aged AZ91 alloy.     

Influence of minor boron on the microstructures of a second generation Nibased single crystal superalloy

Boron is added into single crystal superalloys as a micro-alloying element to strengthen low angle grain boundaries.However,systematic investigations on the effect of boron on microstructures of single crystal superalloys are limitedly reported.The effect of boron on as-cast and heat-treated microstructures was investigated in two experimental Ni-based single crystal superalloys containing 3 wt% Re.The current results indicated that the volume fraction of(γ+γ′)eutectic and M_3B_2 borides was evidently increased,while the number of micropores was evidently decreased with the addition of 0.02 wt% boron.The(γ+γ′)eutectic could not be dissolved completely due to the lower incipient melting temperature caused by the formation of M_3B_2 borides.Meanwhile,the M_3B_2 borides were found to be enriched with indispensable strengthening elements Cr,Mo,W and Re,and this may lower the strengthening effect and cause stress concentration during high temperature creep.