Microstructural characterization and oxidation resistance of multicomponent equiatomic CoCrCuFeNi-TiO high-entropy alloy

CoCrCuFeNi-TiO was prepared by arc melting of the pure elements and Ti₂CO powder under an Ar atmosphere. Both CoCrCuFeNi and CoCrCuFeNi-TiO alloys are composed of a face-centered cubic (fcc) solid solution, whereas the alloys of CoCrCuFeNi-TiO are basically composed of an fcc solid solution and TiO crystals. The microstructures of CoCrCuFeNi-TiO are identified as dendrite and interdendrite structures such as CoCrCuFeNi. The morphology of TiO is identified as an equiaxed crystal with a small amount of added Ti₂CO. By increasing the amount of Ti₂CO added, the TiO content was dramatically increased and part of the equiaxed crystals changed to a dendrite structure. A test of the oxidation resistance demonstrates that the oxidation resistance of CoCrCuFeNi-TiO is better than that of CoCrCuFeNi. However, as the TiO content increases further, a corresponding decrease is observed in the oxidation resistance.     

Effect of melting temperature on microstructural evolutions,behavior and corrosion morphology of Hadfield austenitic manganese steel in the casting process

In this study, the effect of melting temperature on the microstructural evolutions, behavior, and corrosion morphology of Hadfield steel in the casting process is investigated. The mold was prepared by the sodium silicate/CO₂ method, using a blind riser, and then the desired molten steel was obtained using a coreless induction furnace. The casting was performed at melting temperatures of 1350, 1400, 1450, and 1500℃, and the cast blocks were immediately quenched in water. Optical microscopy was used to analyze the microstructure, and scanning electron microscopy (SEM) and X-ray diffractrometry (XRD) were used to analyze the corrosion morphology and phase formation in the microstructure, respectively. The corrosion behavior of the samples was analyzed using a potentiodynamic polarization test and electrochemical impedance spectroscopy (EIS) in 3.5wt% NaCl. The optical microscopy observations and XRD patterns show that the increase in melting temperature led to a decrease of carbides and an increase in the austenite grain size in the Hadfield steel microstructure. The corrosion tests results show that with increasing melting temperature in the casting process, Hadfield steel shows a higher corrosion resistance. The SEM images of the corrosion morphologies show that the reduction of melting temperature in the Hadfield steel casting process induced micro-galvanic corrosion conditions.     

Mineral-phase evolution and sintering behavior of MO-SiO2-Al2O3-B2O3 (M=Ca,Ba) glass-ceramics by low-temperature liquid-phase sintering

In this work, network former SiO₂ and network intermediate Al₂O₃ were introduced into typical low-melting binary compositions CaO·B₂O₃, CaO·2B₂O₃, and BaO·B₂O₃ via an aqueous solid-state suspension milling route. Accordingly, multiple-phase aluminosilicate glass-ceramics were directly obtained via liquid-phase sintering at temperatures below 950℃. On the basis of liquid-phase sintering theory, mineral-phase evolutions and glass-phase formations were systematically investigated in a wide MO-SiO₂-Al₂O₃-B₂O₃ (M=Ca, Ba) composition range. The results indicate that major mineral phases of the aluminosilicate glass-ceramics are Al₂₀B₄O₃₆, CaAl₂Si₂O₈, and BaAl₂Si₂O₈ and that the glass-ceramic materials are characterized by dense microstructures and excellent dielectric properties.     

超亲水薄膜表面接触角的高精度测量

 作为极端润湿表面的一种,超亲水薄膜表面由于具有自清洁、防雾、防腐蚀等特性,成为现代工业、城市建设等领域的研究重点之一。界定极端润湿表面的一种方法为接触角的测量,因此获得更高精度的接触角对极端润湿表面工程具有重要意义。讨论了在超亲水薄膜表面提高接触角精度的3种算法,包括量高法、圆拟合法及椭圆拟合法,结果显示接触角在接近0°时通过圆拟合算法能够提高计算精度。     

Primary Sn-rich titianite in the Qitianling granite, Hunan Province, southern China: An important type of tin-bearing mineral and its implications for tin exploration

The Qitianling calc-alkaline granite in Hunan Province (South China) has attracted much attention since the discovery of the Furong super-large tin deposit. The present study provides new mineralogical data to address their implications for exploration of tin deposits. In the Taoxiwo granite in the southeastern part of the Qitianling granite body, Sn-rich titanite was identified as an important type of Sn-bearing mineral. The titanite commonly occurs with biotite as euhedral crystals, exhibiting typical envelope-like shape and sector-zoning texture. These indicate that the titanite most likely crystallized in the magmatic stage. Electron-microprobe analyses show that the titanite is enriched in tin up to 1.12 wt% SnO₂, with an average of 0.43 wt%. With the crystallization of the granite, primary minerals undertook hydrothermal alteration by magma-derived fluids. Subsequently, in the hydrothermal stage, the primary Sn-bearing titanite was altered (at least partially), but still preserved its typical envelope-shaped outline. Micro-scale cassiterite is a representative product of such alteration; other secondary minerals include fluorite, ilmenite, Sn-bearing rutile and quartz. Therefore, the titanite, commonly present in the calcalkaline granites, can be treated as an important Sn-carrying mineral in the Qitianling granite, reflecting the primary magmatic environment with tin enrichment. The hydrothermal alteration of the primary titanite and subsequent crystallization of cassiterite recorded a process of leaching and accumulation of tin in magmatic-hydrothermal evolution of the Sn-bearing granite. Thus, this titanite has important implications for tin exploration. Supported by National Natural Science Foundation of China (Grant Nos. 40730423 and 40221301) and Project of China Geological Survey (Grant No. 1212010632100)     

Variable diffusion boundary layer and diffusion flux at sediment-water interface in response to dynamic forcing over an intertidal mudflat

The diffusion boundary layer (DBL) significantly limits the exchange between sediment and overlying water and therefore becomes a bottleneck of diffusive vertical flux at the sediment-water interface (SWI). Variable DBL thickness and diffusion flux in response to dynamic forcing may influence replenishment of nutrients and secondary pollution in coastal waters. In situ measurements of velocity in the bottom boundary layer (BBL) and oxygen concentration in the DBL were made over an intertidal mudflat, using an acoustic Doppler current and mini profiler. A linear distributed zone in the oxygen profile, the profile slope discontinuity and variance of concentration can be used to derive accurate DBL thickness. Diffusion fluxes calculated from the water column and sediment are identical, and their bias is less than 6%. A numerical model PROFILE is used to simulate the in situ dissolved oxygen profile, and layered dissolved oxygen consumption rates in the sediment are calculated. The DBL thickness (0.10-0.35 mm) and diffusion flux (15.4-53.6 mmol m 2 d 1) vary with a factor of 3.5 during a tidal period. Over an intertidal mudflat, DBL thickness is controlled by flow speed U in the BBL, according to δDBL=1686.1DU 1+0.1 (D is the molecular diffusion coefficient). That is, the DBL thickness δDBL increases with decreasing flow speed U. Changes of diffusion flux at the SWI are caused by variations in the water above the sediment and the turbulent mixing intensity. The diffusion flux is positively related to the turbulent dissipation rate, friction velocity and turbulent energy. Under the influence of dynamics in the BBL, DBL thickness and flux vary significantly.     

Mechanism of brittle-ductile transition of a glass-ceramic rigid substrate

The hardness, elastic modulus, and scratch resistance of a glass-ceramic rigid substrate were measured by nanoindentation and nanoscratch, and the fracture toughness was measured by indentation using a Vickers indenter. The results show that the hardness and elastic modulus at a peak indentation depth of 200 nm are 9.04 and 94.70 GPa, respectively. These values reflect the properties of the glass-ceramic rigid substrate. The fracture toughness value of the glass-ceramic rigid substrate is 2.63 MPa·m1/2. The material removal mechanisms are seen to be directly related to normal force on the tip. The critical load and scratch depth estimated from the scratch depth profile after scratching and the friction profile are 268.60 mN and 335.10 nm, respectively. If the load and scratch depth are under the critical values, the glass-ceramic rigid substrate will undergo plastic flow rather than fracture. The formula of critical depth of cut described by Bifnao et al. is modified based on the difference of critical scratch depth     

Design and fabrication of superconducting HEB mixer

This paper describes the design and fabrication of superconducting hot electron bolometer （HEB） mixer based on ultra-thin superconducting NbN films. The high quality films were epitaxially grown on high resistance Si substrates. The device was fabricated by magnetron sputtering, electron beam lithography （EBL）, reactive ion etching （RIE）, lithography, and so on. The device＇s resistance-temperature （R-T） curves and current-voltage （I-V） curves were studied. The results of THz response of the device are presented. Y-factor technique was used to measure the device＇s noise temperature. When the device was irradiated with a laser radiation of 2.5 THz, the obtained lowest noise temperature of the device was 2213 K.     

Development of a middle and low latitude theoretical ionospheric model and an observation system data assimilation experiment

On the basis of previous work, we develop a middle and low latitude theoretical ionospheric model in this paper, named Theoretical Ionospheric Model of the Earth in the Institute of Geology and Geophysics, Chinese Academy of Sciences （TIME-IGGCAS）. TIME-IGGCAS solves the equations of mass continuity, motion and energy of electron and ions self-consistently and uses an eccentric dipole field approximation to the Earth＇s magnetic field. We combine the Eulerian and Lagrangian approaches in the model and take account of the plasma ExB drift velocity. Calculation results reveal that the model is steady and credible and can reproduce most large-scale features of ionosphere. By using TIME-IGGCAS, we carried out an observation system data assimilation experiment. Assimilation results show that the ExB drift velocity can be accurately estimated by ingesting the observed foF2 and hmF2 into the model applying nonlinear least-square fit method. We suggest that this work is of great significance in the development of ionospheric data assimilation model to give better nowcast and forecast of ionosphere.     

An Improved Identity-Based Society Oriented Signature Scheme with Anonymous Signers

In this paper, we present an improved identity-based society oriented signature scheme with anonymous signers, which satisfies： （1） when members leave or join an organization, the public verification key and the signature verification procedure are unchanged; （2） a user participates in several organizations at the same time, her secret key is only related with her identity. However, no previous schemes have these two properties.