基于多元时间序列融合的飞行动作识别方法

针对飞行动作数据随机性强与长度不一致的问题,提出通过减小动态时间规整(DTW)算法的搜索空间,并定义不同特征参数贡献度的概念,实现对飞行数据的多元时间序列融合,从而完成对战术机动动作的识别。通过引入预分类和细分类结合的方式,对动作数据进行预处理,然后根据改进的动态时间规整(WDTW)算法对待测数据进行识别。仿真实验表明,相比传统DTW算法,WDTW算法通过降低算法复杂度,识别计算时间变化明显;对核密度与精准度系数的分析表明识别准确率亦有所提高。实验结果验证了所提方法的准确性。     

（BN）n及SiB（n-1）Nn（n=2-11）稳定结构的研究

利用遗传算法及Gastreich提出的经验势函数,研究了（BN）n（n=2-11）和SiBn-1Nn（n=2-11）团簇的可能稳定结构,对能量较低的异构体在HF/STO-3G水平进行优化,得到了（BN）n（n=2-11）和SiBn-1Nn（n=2-11）团簇稳定结构单环及线状结构,并进一步分析了单环的结构特征及相对稳定性。     

Effects of self evaluation on late ERP components

High-density event-related potentials (ERPs) were measured when participants were required to evaluate oneself, significant others (father and mother) and the most familiar public figures (Lei Feng and Jiang Qing) based on trait adjectives. There were three referential conditions and a non-referential control condition including self-evaluation (SE), significant other-evaluation (SOE), general other-evaluation (GOE), and semantic positivity-evaluation (SPE). The behavioral data showed that RTs to GOE condition were longer than the other three conditions. Scalp ERP analysis revealed that (1) SPE condition elicited a more negative N2 than SE condition, which was associated with inhibition of responses; (2) SE condition elicited a more positive P300 than SPE condition, which was an index of attention to self-relevant stimuli; (3) there was no difference on the amplitude and latency of P300 between SE and SOE conditions, which reflected that the concept of “self” included intimate others (e.g., father and mother) in Chinese culture.     

旋流式低温送风口的实验研究

对新研制的一种旋流式低温送风口进行了空气动力、速度场、温度场及噪声测试.测试结果表明该旋流式低温送风口诱导效果好、阻力小、能耗低、噪声低、送风均匀、不结露,完全能满足低温送风要求.     

对高校学生参加图书馆勤工助学的几点思考

对大学生参加图书馆勤工助学的原因、意义做了客观分析，针对学生参加图书馆助学的现状以及高校图书馆勤工助学存在的问题进行了详细的阐述，并提出了相应的解决措施。     

改善20CrMnTiH淬透性的研究

莱钢特钢厂20CrMnTiH钢材成分波动较大,淬透性带HRC8～10,范围较大,制约了齿轮钢质量的进一步提高.通过研究,发现铸坯中心偏析尤其是碳偏析为主要问题.通过工艺优化采取各项措施,尤其增加电磁搅拌后,中心碳偏析得到明显改善;C控制在0.19%～0.20%的炉次达到了95.6%;淬透性带控制在HRC6内的达到了92.1%;在HRC4内的达到了86.2%;提高了产品质量,满足了用户需求.     

基于时延脉冲耦合神经网络的AOE-网问题求解算法

 在时延脉冲耦合神经网络(DPCNN-Delay Pulse Coupled Neural Network)的基础上,提出了mDPC-NN(modified DPCNN)模型.mDPCNN能方便地用于有向网的最大代价路径和最小代价路径的求解,并将其成功地运用其于求解AOE-网(Activity On Edge)有关问题.该方法通过快速并行计算,一次正向计算即可求解AOE-网大部分问题,与传统方法相比体现了较好的优势.     

Finding finer functions for partially characterized proteins by protein-protein interaction networks

Based on high-throughput data, numerous algorithms have been designed to find functions of novel proteins. However, the effectiveness of such algorithms is currently limited by some fundamental factors, including (1) the low a-priori probability of novel proteins participating in a detailed function; (2) the huge false data present in high-throughput datasets; (3) the incomplete data coverage of functional classes; (4) the abundant but heterogeneous negative samples for training the algorithms; and (5) the lack of detailed functional knowledge for training algorithms. Here, for partially characterized proteins, we suggest an approach to finding their finer functions based on protein interaction sub-networks or gene expression patterns, defined in function-specific subspaces. The proposed approach can lessen the above-mentioned problems by properly defining the prediction range and functionally filtering the noisy data, and thus can efficiently find proteins’ novel functions. For thousands of yeast and human proteins partially characterized, it is able to reliably find their finer functions (e.g., the translational functions) with more than 90% precision. The predicted finer functions are highly valuable both for guiding the follow-up wet-lab validation and for providing the necessary data for training algorithms to learn other proteins.     

PVC基活性炭的制备及其吸附性能的研究Ⅰ——PVC沥青的制备及其预氧化

以PVC树脂为原料,采用两个恒温段的程序升温方法加热脱氯制备PVC沥青,并通过空气预氧化法,对所制备的PVC沥青进行了预氧化处理.实验结果表明,PVC树脂在流速为100 mL/min氮气气氛中,以10℃/min速率程序升温至270℃,恒温脱氯150 min后再程序升温至410℃并恒温芳化120 min,可以制备出脱氯率和得率均较高的PVC沥青.该PVC沥青在300℃温度下,采用空气预氧化法预氧化120min,可获得增重率约为11%,氧化交联度较高、耐热性能较好的预氧化PVC沥青.FT-IR光谱分析结果表明,PVC沥青在预氧化的过程中,主要发生了氧化脱氢、脱水、CO2缩聚交联反应,使沥青形成耐热型的氧桥结构,从而达到预氧化目的.