Long term monitoring of urban subsidence by Permanent Scatterer DInSAR

When using differential SAR interferometry (DInSAR) to monitor the surface deformation over a long time scale, it is often strongly affected by the spatial and temporal decorrelations and atmospheric dishomogeneities. The recently developed Permanent Scatterers (PS) technique proposed by Fertti et al. can overcome these difficulties by interpreting time-series of interferometric phase only at coherent point scatterers. In this study, we apply this PS technique using 25 ERS-1/2 scenes from 1992 to 2000 to monitor the subsidence in Suzhou. By using the linear deformation model, the deformation map in Suzhou urban area over the eight years is obtained. And the calculated results are in good agreement with the measurements of leveling.     

光谱辐射标准和计量实验站的建设和研究

介绍了光谱辐射标准和计量光束线（U27）的光学设计、结构和实验站设备，利用透射光栅和AXUV100G探测器系统研究了掠入射分支（SGM）5～140nm的高次谐波情况；给出了研究结果和不同滤片材料对高次谐波的抑制情况，Zr，Si3N4和Al滤片可以有效的抑制5～34nm的高次谐波，MgF2能有效的抑制115～140nm的高次谐波．     

椭圆偏振法研究四方氧化锆对Zr-Sn-Nb合金氧化膜耐腐蚀性能的影响

将经过不同热处理的Zr-Sn-Nb合金样品放在350℃、16．8mol／LPa、0．01mol／LLiOH溶液的高压釜中进行腐蚀。用椭圆偏振法研究氧化膜中的四方氧化锆，发现经过580℃／冷轧／500℃处理的样品在腐蚀42天和190天后氧化膜中的四方氧化锆比其它样品的多。四方氧化锆是影响合金耐腐蚀性能的一个主要因素，四方氧化锆的形成有利于提高合金的耐腐蚀性能。     

应用型高技能数控人才实训模式的研究——以井冈山大学工学院为例

本文介绍了应用型高技能数控人才的培养目标,从加大设备投入、安装通用软件、保证学生实践时间、建立一支高水平师资队伍、加强校企合作这些方面着手,建立了一套较为完善的实训模式,以增强学生的编程、操作、软件应用等方面的能力。     

基于多元时间序列融合的飞行动作识别方法

针对飞行动作数据随机性强与长度不一致的问题,提出通过减小动态时间规整(DTW)算法的搜索空间,并定义不同特征参数贡献度的概念,实现对飞行数据的多元时间序列融合,从而完成对战术机动动作的识别。通过引入预分类和细分类结合的方式,对动作数据进行预处理,然后根据改进的动态时间规整(WDTW)算法对待测数据进行识别。仿真实验表明,相比传统DTW算法,WDTW算法通过降低算法复杂度,识别计算时间变化明显;对核密度与精准度系数的分析表明识别准确率亦有所提高。实验结果验证了所提方法的准确性。     

Effects of self evaluation on late ERP components

High-density event-related potentials (ERPs) were measured when participants were required to evaluate oneself, significant others (father and mother) and the most familiar public figures (Lei Feng and Jiang Qing) based on trait adjectives. There were three referential conditions and a non-referential control condition including self-evaluation (SE), significant other-evaluation (SOE), general other-evaluation (GOE), and semantic positivity-evaluation (SPE). The behavioral data showed that RTs to GOE condition were longer than the other three conditions. Scalp ERP analysis revealed that (1) SPE condition elicited a more negative N2 than SE condition, which was associated with inhibition of responses; (2) SE condition elicited a more positive P300 than SPE condition, which was an index of attention to self-relevant stimuli; (3) there was no difference on the amplitude and latency of P300 between SE and SOE conditions, which reflected that the concept of “self” included intimate others (e.g., father and mother) in Chinese culture.     

旋流式低温送风口的实验研究

对新研制的一种旋流式低温送风口进行了空气动力、速度场、温度场及噪声测试.测试结果表明该旋流式低温送风口诱导效果好、阻力小、能耗低、噪声低、送风均匀、不结露,完全能满足低温送风要求.     

改善20CrMnTiH淬透性的研究

莱钢特钢厂20CrMnTiH钢材成分波动较大,淬透性带HRC8～10,范围较大,制约了齿轮钢质量的进一步提高.通过研究,发现铸坯中心偏析尤其是碳偏析为主要问题.通过工艺优化采取各项措施,尤其增加电磁搅拌后,中心碳偏析得到明显改善;C控制在0.19%～0.20%的炉次达到了95.6%;淬透性带控制在HRC6内的达到了92.1%;在HRC4内的达到了86.2%;提高了产品质量,满足了用户需求.     

合成N,N,N'''',N''''-四(2-甲酯基乙基)乙二胺的绿色工艺研究

为了解决合成聚酰胺-胺时回收液处理复杂、能耗大、并污染环境的问题,以合成N,N,N',N'-四(2-甲酯基乙基)乙二胺(TMCEDA)为研究对象,对不同真空度条件下的回收液进行了定性定量分析,在此基础上,采用分段减压蒸馏分离合成TMCEDA中的过量原料与溶剂,直接循环使用真空度在50 kPa-100 kPa的回收液的新工艺.应用气相色谱分析技术跟踪分析循环使用的回收液的成分,结果表明,经过40次循环使用的回收液,仍未见明显的杂质积累现象.该工艺对回收液的直接使用率高达98.0%,实现了TMCEDA的实验室绿色合成,可为其工业化生产提供参考.图7,表2,参11.