双间隙加速管设计中几个问题的研究

对加速管的放电或击穿与绝缘环，电极材料，极间距离和真空度等因素的关系进行了分析，为加速管的设计提供了依据。以此研制的加速算运行正常。     

A High Speed Detection Scheme for Point Targets in a Multitarget Environment

The purpose of this paper is to develop a high speed detection scheme for moving and / or stationary point targets in a multitarget environment as registered in an IR image sequence. An iterative approximate 3-D line searching algorithm based upon the geometric representation of lines (for non-maneuvering targets in space) in a 3-D space is derived. The convergency of the algorithm is proved. An analysis is performed of the theoretical detection performance of the algorithm. The statistical experiment results show high effectiveness and computational efficiency of the algorithm in the case of low SNR. The idea may be employed to satisfy the real-time processing requirement of an IR system.     

Fe_3Al的抗高温氧化和耐热腐蚀性能

在７００℃与８５０℃的高温下，Ｆｅ＿３Ａｌ金属间化合物表面形成了Ａｌ＿２Ｏ＿３保护膜，使其抗氧化性能远优于不妨钢，２％Ｃｒ（原子百分比）加入Ｆｅ＿３Ａｌ会导致氧化过程初期氧化速率的增高，在熔融的硫酸盐和高压锅炉的烟气中，Ｆｅ＿３Ａｌ的耐热腐蚀性能优于高温合金ＧＨ１３２．     

管道纺包芯纱的研究

本文研究了在管道纺纱机上不添加构件而进行包芯纱的纺制。分析了其包芯纱的成纱机理。观察了实际成纱的横截面,证实了棉纤维能够均匀地、完全地包覆在芯丝的周围。也对不同性质的芯丝所纺包芯纱的结构作了观察,并对不同成纱的性质随速度增加而变化的规律作了研究。     

周期信号的孔径抖动及其去除

孔径抖动是指模数转换器采样周期之间出现的相位抖动 ,是由各时钟周期边沿出现时刻的不确定性导致的。当输入信号频率较高时孔径抖动是模数转换器信噪比下降的一个重要原因。对数据采集系统中的孔径抖动进行了仿真实验 ,介绍了反卷积算法 ,并利用反卷积算法对周期信号的孔径抖动进行了去除。仿真结果表明该方法是有效可行的     

金属间化合物Ni3Al中的硼晶界偏聚特性的AES研究

本文应用俄歇能谱仪研究了不同化学计量比ＮｉＡｌ金属间化合物硼在晶界偏聚的特性。研究结果表明：硼在Ｎｉ３Ａｌ的各个晶界偏聚存在着不均匀性，硼在晶界的偏聚范围只有几个原子层，晶界结构及晶界化学环境是影响在晶界偏聚的决定因素。     

高含固量聚苯乙烯－聚丙烯酸酯复合乳胶的合成及表征

本文采用种子乳液聚合技术，合成聚苯乙烯－聚丙烯酸酯复合乳液，用ＴＥＭ电镜观察其乳液的形态，用ＧＰＣ方法测定了乳胶聚合物的化学组成。     

Discovering Frequent Subtrees from XML Data Using Neural Networks

By rapid progress of network and storage technologies, a huge amount of electronic data such as Web pages and XML has been available on Internet. In this paper, we study a data-mining problem of discovering frequent ordered sub-trees in a large collection of XML data, where both of the patterns and the data are modeled by labeled ordered trees. We present an efficient algorithm of Ordered Subtree Miner （OSTMiner） based on two- layer neural networks with Hebb rule, that computes all ordered sub-trees appearing in a collection of XML trees with frequent above a user-specified threshold using a special structure EM-tree. In this algo- rithm, EM-tree is used as an extended merging tree to supply scheme information for efficient pruning and mining frequent sub-trees. Experiments results showed that OSTMiner has good response time and scales well.     

30MnNbXt钢组合匹配接头性能的研究

本文为新钢种30MnNbXt设计了一种独特的组合匹配接头,研究了底层奥氏体焊条的合金系统及填充层结构钢焊条的强度对抗裂性的影响,探讨了底层高组配、填充层低组配的组合匹配焊缝特征区的组织特点及接头的力学性能。在西德WS1.7—2.0/3.5型综采支架立柱中应用表明,组合匹配接头可使30MnNbXt钢在室温下焊接时不产生裂纹;接头在焊后状态的使用性能完全符合产品技术条件要求。     

钨酸铜的生成及其氢还原过程的研究

本文提出一种生产微细钨铜复合粉的方法。将WO_3(或蓝钨)和CuO均匀混合,在空气中焙烧生成CuWO_4,再在氢气中还原,就能制得微细钨铜复合粉,其钨、铜两相分布均匀,钨颗粒细小且分布狭窄。本文详细地研究了钨酸铜的生成及其氢还原过程,与WO_3相比,发现两者的还原相变过程及动力学过程有某些差异。