谈发展生物质产业中的几个问题

2005年初,我在《科技日报》上发表了“发展生物质产业”一文[1],至今已半年有余,这方面的情况目前又有了许多变化,如:国际原油价格由每桶40多美元飚升到60多美元,美国总统签署了“美国能源法案”,我国能源形势愈趋严峻,以及生物质产业开始在我国引起更多的社会关注等等。本文拟     

Development of the CAS-IBB single-particle microbeam for localized irradiation of living cells

A single-particle microbeam facility has been constructed at the Key Laboratory of Ion Beam Bioengineering (LIBB), Chinese Academy of Sciences (CAS). The system was designed to deliver a defined numbers of hydrogen ions, produced by a van de Graaff accelerator, in an energy range of 2.0-3.0 MeV, into an area smaller than that of the nucleus of an individual living cell. The beam is collimated by a borosilicate glass capillary that forms the beam-line exit. An integrated computer program recognizes the cells and locates them one by one over the microbeam exit for irradiation. We present technical details of the CAS-LIBB microbeam facility, particularly on the collimator, hardware, control program, as well as cell irradiation protocols available. Various factors contributing to the targeting and positioning precision are discussed along with accuracy measurement results.     

HYDROLYSIS OF PAPER-DISHWARE WASTES BY CELLULASE

The optimum conditions of hydrolysis of cellulosic wastes by cellulase were studied. The results show that the optimum conditions of sulfuric acid pretreatment were sulfuric acid consistency 0.3M,pretreatment temperature 100℃, pretreatment time 4hours. After sulfuric acid pretreatment, the optimum conditions of hydrolysis by cellulase were enzymatic temperature 50℃ ,enzymatic time 48hours,pH4.8,the charge of cellulase 100IU/g and the substraste consistency 60g/l. Meanwhile this paper studies that the structural change of cellulose during sulfuric acid pretreatment and cellulase hydrolysis by analyzing the infrared spectra.     

Measurement of Magnetization Curve and Magnetic Relaxation for 2H-NbSe2 Crystals

The characteristics of electronic transport properties: behaviors of magnetization curve and magnetic relaxation of a typical normal superconductor 2H-NbSe2 are investigated. The results show that Tc and △Tc of the samples are 7. 2,0. 18 K, indicating that superconducting energy gap at zero temperature is 1. 1 meV. No fish tail shape is found in the magnetization curves at several temperatures. The relationship between remnant magnetic moment and time reveals that the magnetic flux creep of the sample agrees with the Kim-Anderson thermal activation model with the relaxation rate S=0.000 36 at T=6 K.     

基于梯度的帧内自适应深度决策算法

提出了一种基于梯度的帧内候选模式裁剪算法,通过自适应深度划分并利用空间信息来简化帧内预测过程,大大减少了计算复杂度.实验结果显示,所提出的算法对比HM16.7,可以减少35.25%的计算复杂度,且只有极小的编码效率损失.     

中立型随机时滞微分方程的离散反馈镇定

考虑了中立型随机时滞微分方程基于离散时间状态观测的反馈镇定问题.首先建立了受控系统均方指数稳定的充分条件,然后基于此用线性矩阵不等式方法设计了所需的离散时间的反馈控制器,最后举例说明了所得结果的有效性.     

铀矿排风井周边地表大气氡致辐射效应的数值模拟

为了指导铀矿排风井周边地表环境的辐射防护设计,基于放射性气态流出物大气扩散的高斯烟羽模型,建立了铀矿排风井周边地表年均氡浓度以及公众个人年有效剂量的数学计算模型,研究了排风井气态流出物初始氡浓度、排风风量和源强对排风井周边地表1 km范围内年均氡浓度以及公众个人年有效剂量分布的影响.结果表明,在其他参数不变的情况下,年均氡浓度和公众个人年有效剂量的最大值随气态流出物初始氡浓度的增加而增大,随排风风量的增加而减小;最大值离井口的距离和氡致辐射的影响范围随初始氡浓度的增加而增大,随排风风量的增加而减小;相同源强下,最大值随气态流出物的初始氡浓度增加而增大,随排风风量的增大而减小;最大值离井口的距离随排风风量的增加而增大.最后,根据所得结论提出铀矿排风井周边的辐射防护建议.     

学龄前和学龄期儿童希氏束以上心动过速性心肌病高危因素分析

目的探讨学龄前和学龄期儿童希氏束以上的心动过速(室上性心动过速)与心动过速性心肌病的相关性及高危因素.方法选取室上性心动过速患儿179例,根据心动过速时心功能状态分为心肌病组23例,非心肌病组156例.分析患儿性别、年龄、发作类型、发作频率、持续时间、心室率与心功能损伤的关系和相关高危因素.结果 179例患儿中心动过速性心肌病23例,其中房室折返性、房室结折返性、无明确分类的心肌病分别为7例、10例、6例.房速所致心动过速性心肌病发生率为25.00%(8/32),明显高于阵发性室上性心动过速所致的心肌病发生率10.20%(15/147),差异具有统计学意义(P0.05).心肌病组患儿中房速所占比例、发作持续时间明显高于非心肌病组患儿,发作频率明显低于非心肌病组患儿,差异均具有统计学意义(P0.05).二元Logistic回归分析显示:发作持续时间是心动过速性心肌病的独立影响因素.结论学龄前和学龄期儿童室上性心动过速所致心动过速性心肌病的发生率为12.85%,其中房速所致的心肌病发生率明显高于阵发性室上性心动过速,发作持续时间是唯一高危因素.     

一种新型冷轧辊用钢的组织演变

本文以一种新型冷轧辊用钢为研究对象,借助金相显微镜和扫描电子显微镜分析了试验钢在正火、球化退火、淬火、回火过程中的组织演变,研究了碳化物的成分变化和溶解析出行为。结果显示,试验钢正火后得到马氏体+部分颗粒状和少量块状碳化物的显微组织;球化退火后的显微组织为铁素体基体上分布有大量颗粒状碳化物+少量块状碳化物,球化退火组织评定为为2~3级;淬火后的组织为马氏体+部分颗粒状和少量块状碳化物;三次回火后的组织为回火马氏体+部分颗粒状和少量块状碳化物。试验钢中的块状碳化物在整个热处理过程中始终存在,1100℃以下奥氏体化时只发生边缘部分的少量溶解。颗粒状碳化物主要为M23C6型,在热处理过程中存在明显的溶解和析出行为,1100℃以下奥氏体化时部分溶解。     

分级多孔纳米炭纤维的结构及电容性能

以酚醛树脂为碳源、PVP为纺丝助剂、纳米MgO颗粒为模板剂,通过静电纺丝法制得酚醛树脂基纳米炭纤维,经过炭化、KOH活化、酸洗后得到分级多孔纳米炭纤维,利用SEM、XRD、XPS、拉曼光谱仪及氮气吸脱附实验,对所制多孔纳米炭纤维的结构和形貌进行表征,并将其作为模拟电容器的电极,利用循环伏安、恒电流充放电及交流阻抗方法测试了材料的电化学性能。结果表明,KOH活化引入了数量可观的微孔,所得纳米炭纤维表现出明显的"微孔-中孔-大孔"分级孔分布的特点,其比表面积达到1058.4m~2/g,总孔容为1.64cm~3/g。电化学测试结果表明,所制分级多孔纳米炭纤维在6mol/L KOH电解液中显示出优异的电容性能,在0.2A/g的电流密度下,其放电比容量达到198F/g,在20A/g电流密度下,电容保持率达到65%。