基于电流反馈的双通道忆阻器写操作方法

提出了一种基于电流反馈控制的双通道忆阻器写操作方法,利用镜像电流源分别作用于参考通道和忆阻通道,讨论了参考通道对写操作精确度的影响,并与一种经典的电压反馈控制忆阻器写操作方法进行数值分析和电路仿真比较.结果表明:这种方法对忆阻器的写操作将具有更好的准确度和可靠性,证明了这种具有参考通道的忆阻器写操作方法的可行性.     

Discovery of the highly depleted N-MORB-type volcanic rocks: new evidence for the Mianlue paleo-ocean

The highly depleted N-MORB-type volcanic rocks have been discovered in Mianlue mélange of Qinling orogenic belt, central China. These mafic rocks are associated with the meta-peridotites, showing LREE-depleted pattern, similar to N-MORB and typical ophiolites. It is indicated that an ancient ocean existed in the Mianlue area of Qinling orogenic belt during the late Paleozoic.     

N-苄基-N-正丁基丙烯酰胺三元共聚物与SDS的相互作用

两亲聚合物与表面活性剂在溶液中能形成聚合物/表面活性剂复合物从而引起溶液性质发生重大变化。通过自由基胶束共聚法制备疏水单体为N-苄基-N-正丁基丙烯酰胺(BBAM)的三元共聚两亲聚合物P(AM-NaA-BBAM),并采用FT-IR进行结构表征。采用荧光探针法、黏度法、流变法研究P(AM-NaA-BBAM)与十二烷基磺酸钠(SDS)的相互作用,分析二者的相互作用机制。结果表明:SDS质量浓度较低时,P(AM-NaA-BBAM)与SDS通过形成混合胶束提高P(AM-NaA-BBAM)/SDS混合体系中疏水基团的缔合强度以及混合溶液的表观黏度和弹性;SDS质量浓度较高时,部分疏水基团单独增溶于表面活性剂胶束中从而破坏溶液的空间网络结构,疏水基团的缔合强度降低,混合溶液表观黏度及弹性降低。     

Lasing on pyroclastic rocks: A case study of <Superscript>40</Superscript>Ar/<Superscript>39</Superscript>Ar dating on Moshishan Group,eastern Zhejiang Province

It is difficult to date pyroclastic rocks, for almost all the dating methods, due to the multiple sources during their formation. ^40Ar/^39gAr incremental heating results on groundmass selected from the samples show that the age spectra are meaningless geologically. However, singe crystal total fusions of CO2 lasing on the sanidine separates could yield rational 4^40Ar/^39Ar results and distinguish their sources in this study. Timing on three formations of the Moshishan Group, after avoiding the exotic and altered grains by lasing on the single sanidine separate, was reported in this paper. The lowermost portion of the Chawan Formation gives an age of 113.7±0.3 Ma; the lower part of the Xishantou Formation was formed 116.4±0.4 Ma ago and the bottom of the Gaowu Formation took its shape at 118.4±0.4 Ma. These new ages are much younger than the previous ones, suggesting that these thick volcanic formations had been formed in very short durations.     

磷对烃类催化裂化催化剂表面酸性及抗炭性能的影响

考察了磷改性对催化裂化（ＦＣＣ）催化剂的表面酸性、抗炭性及反应活性的影响，探讨了催化剂表面酸性与抗炭性能的关系，结果表明，在以超稳Ｙ分子筛作为活性组分的ＦＣＣ催化剂中引入磷元素，能降低催化剂的表面酸强度，减少酸中心数，降低催化剂的积炭速率，同时加入适量的磷有利于提高催化剂的反应活性。     

含TiO_2熔渣与铁液之间钛的行为

探讨了含TiO_2熔渣与铁液之间钛的行为,结果表明在试验条件下,钛从熔渣向铁液内迁移时受钛离子在渣中扩散的控制,整个迁移过程的表观级数为准零级,表观活化能为62kcal/mol,讨论了渣中TiO_2含量,碱度,温度等因素对钛迁移量和迁移速度的影响,发现炉渣碱度对钛迁移影响具有两重性:若渣中TiO_2含量较高时(TiO_2>25％),提高碱度将减少钛的迁移量和迁移速度;反之,若渣中TiO_2含量较低时(TiO_2<25％),提高碱度却增加钛的迁移量和迁移速度。     

Design and fabrication of 1-D semiconductor nanomaterials for high-performance photovoltaics

To date, the cost-effective utilization of solar energy by photovoltaics for large-scale deployment remains challenging. Further cost minimization and efficiency maximization, through reduction of material consumption, simplification of device fabrication as well as optimization of device structure and geometry, are required. The usage of 1D nanomaterials is attractive due to the outstanding light coupling effect, the ease of fabrication, and integration with one-dimensional(1-D) semiconductor materials. The light absorption efficiency can be enhanced significantly, and the corresponding light-toelectricity conversion efficiency can be as high as their bulk counterparts. Also, the amount of active materials used can be reduced. This review summarizes the recent development of 1-D nanomaterials for photovoltaic applications, including the anti-reflection, the light absorption,the minority diffusion, and the semiconductor junction properties. With solid progress and prospect shown in the past 10 years, 1-D semiconductor nanomaterials are attractive and promising for the realization of high-efficiency and low-cost solar cells.     

聚丙烯腈/羟乙基纤维素共混体系溶液的流变性

探讨了聚丙烯腈/羟乙基纤维素(PAN/HEC)共混溶剂的选择及体系的相容性和流变性.结果表明,二甲基亚矾是PAN/HEC的较理想溶剂,而且它们在热力学上是不相容的.然而,由于体系粘度高,大分子链运动困难,因此在某些条件下相对稳定,显示了典型的非牛顿流体的特征.随着HEC/PAN共混比的增加,总固含量的提高,以及温度的降低,共混溶液的非牛顿指数降低,结构粘度指数上升,剪切弹性模量和最大松驰时间增加.     

反复变动轴力作用下钢柱的数值分析模型

当承受水平地震荷载时，高层框架结构的低层柱子通常受到困倾覆力矩而引起的反复变动轴力．文中提出一弹塑性数值分析模型以考虑变动轴力对柱子抗育强度的影响，并提出单轴移动骨架式恢复为模式来表现钢柱的恢复力特性．通过荷载试验结果对这一数值分析模型进行了检验．     

Treatment of PC-3 cells with ultrasound combined with microbubbles induces distinct alterations in the expression of Bcl-2 and Bax

The objective of the present study was to investigate whether ultrasound combined with microbubbles induces apoptotic cell death in androgen-independent prostate cancer cells and to identify the probable mechanism. We used ultrasound in continuous wave mode with a frequency of 21 kHz and a spatial-average temporal-average intensity of 46 mW/cm². Ultrasound combined with microbubbles (200 μL SonoVue?) was used to treat androgen-independent human prostate cancer PC-3 cells for 30 s. PC-3 cells were divided into three groups: the control group, the ultrasound group and the ultrasound combined with microbubbles group. Immediately after treatment, trypan blue exclusion was used to assess cell viability. Cell apoptosis at 24 h after treatment was measured using transmission electron microscopy and flow cytometry. Western blotting was used to evaluate the expression of the apoptosis-related proteins, Bcl-2 and Bax. Ultrasound combined with microbubbles had a minimal effect on the viability of PC-3 cells and induced minimal levels of cell lysis. The level of apoptosis in PC-3 cells induced by this modality was significantly higher than in controls (12.77 ± 0.31% vs. 2.56 ± 0.22%, P<0.01). Treatment with ultrasound combined with microbubbles increased the expression of Bax, a pro-apoptotic protein, and decreased the expression of Bcl-2, an anti-apoptotic protein. It was concluded that ultrasound combined with microbubbles induces apoptotic cell death in human prostate cancer PC-3 cells through down-regulation of Bcl-2 and up-regulation of Bax.