论高炉精料

提出高炉精料应考虑铁矿石、焦炭及合理的炉料结构三个方面。对铁矿石精料的要求八字诀是：“高、熟、稳、好、少、净、匀、小”；对焦炭精料要求的四字诀是：“高、低、少、好”。并认为今后应更加重视铁矿石及焦炭的热态冶金性能。     

低温热解脱氧方法研究

为研究低煤化度煤含氧官能团的化学活性及其改性机理，通过对低温热解方法条件的确定，建立了实验室规模低温热解脱氧方法，进一步考察了该方法的效果。结果表明，在实验室采用此法研究低煤化度煤低温热解脱氧是可行的。     

单调增函数幂次积分序列的一个新结果

利用实分析中函数项级数收敛的性质，建立其相关的等式，证明了如下结果：设ｆ（ｘ）在［０，１］上单调增加并且满足下式：∫１０ｆｎ（ｘ）ｄｘ＝ｐｎ＋１，ｎ＝１，２，３，…其中，ｐ为正常数，那么有：０＜ｐ≤１且ｆ（ｘ）＝（ｘ＋ｐ－１）／ｐ，ｘ∈（１－ｐ，１）０，ｘ∈（０，１－ｐ］｛。证明具有一定的技巧性，逻辑性强，条理清楚。     

熔盐Cr-Ti碳化物复合层涂覆技术

对表面镀铬、渗铬的钢件进行硼砂熔盐浸渍渗钛处理，可形成多元碳化物复合层。其抗冲击疲劳及抗介质腐蚀性能均明显优于单一渗钛层。应用Ｘ－ｒａｙ衍射及电子探针技术，确定了复合层的结构。     

探地雷达复信号分析及改进

利用复信号分析可求得表征探地雷达信号特征的多个参量，从而可对雷达信号进行深入的分析和研究．然而，该方法对噪声特别敏感．为此，作者引入小波变换，对分析过程进行了改进．实际处理效果表明：小波变换的引入很好地克服了复信号分析缺点．     

缠绕式提升机圆板支轮位置对筒壳应力的影响

通过对缠绕式提升机圆板支轮筒壳应力的分析，得出支轮处弯矩不一定是支轮区的最大弯矩；指出了支轮位置的选择范围．按此范围设计的卷筒，使用效果良好．     

Synthesis of glucoside compounds of ferrocenyl phenols and their antianemic activity

Six glucoside compounds have been synthesized by means of phase-transfer catalytic method and deacetylation from the starting material ferrocene. Their structures have been confirmed by elementary analysis, IR,¹HNMR and MS. The antianemic activities of some compounds have also been tested. Results indicate that these glucoside compounds possess the antianemic activities and therefore, the further study is well worth making. Supported by the foundation of Wuhan Metropolis Commission of Science and Technology Liu Huiying: born in 1937, Professor     

Collaborative applications based on the internet

The basic concepts of collaborative applications and some relevant aspects about network communications are introduced. With the examples of some collaborative applications developed by us, several technical problems about collaborative applications, such as loss of data packets, unknown IP address and timedelay, are discussed in detail. And the methods of solving these problems are also provided. Supported by International Cooperation Project (Japan, Jincheng Co. Ltd) Fang Rui: born in 1975, Graduate student     

基于 STEP 机械零件的 CAD/CAPP/CAM 集成工具

ＳＴＥＰ标准是国际标准化组织正在开发的计算机集成制造系统信息集成的产品数据表达与交换标准。以ＣＡＤ／ＣＡＰＰ／ＣＡＭ系统为背景，开发了ＳＴＥＰ信息集成工具ＰＭＳＳ。为了使产品数据操作方便与灵活，该工具可以对产品数据进行查询、修改及ＳＴＥＰ文件的重构，并提供ＳＤＡＩ接口、Ｃ语言的调用，以及ＳＴＥＰ中性文件的前／后处理器设计手段，使ＣＡＤ、ＣＡＰＰ、ＣＡＭ各功能子系统方便地达到集成与共享。