基于GIS的地震火灾动态蔓延模拟

用惠更斯原理对震后火灾的动态蔓延过程进行了模拟,并开发了基于GIS的城市地震次生火灾动态蔓延模拟系统,该系统可以模拟单个 或者多个起火点的动态蔓延过程。研究结果可以定量地估计地震次生火灾对城市的危害,从而在最短时间内给救灾应急提供决策依据。     

锂硫聚合物二次电池关键材料研究进展

报告了在复合型纳米硫正极材料、纳米储锂合金负极材料和用原位合成工艺掺入纳米二氧化硅的凝 胶型聚合物电解质的研制方面所取得的进展;所研制的复合型纳米硫正极材料与凝胶电解质及锂金属负极配合 制成扣式实验电池进行测试,容量已达到７００mAh桙g,发现该材料放电电压是现有锂钴氧材料放电电压的一半, 双电池串联可以与现有锂钴氧材料电池互换;采用微乳液新工艺合成的Cu－Sn纳米合金材料,以石墨与金属锡 复合的材料,以及以金属氧化物作为原料,采用乳液法制备碳微球镶嵌金属锡的球形复合材料等高容量负极材 料取得了较大的进展     

加热与加酸对污泥释磷影响研究

利用热和酸有助于微生物细胞破碎原理,对含磷污泥在不同温度（60、70、80、90℃）,不同无机酸（H2SO4、HCl、HNO3）以及两者共同作用下的释磷效果进行了比较研究．结果表明,随着加热时间延长和温度升高,污泥释磷率提高,90℃下加热2h,总磷（T-P）释放率为22．5％,明显比60℃下高．在加酸条件下,随着酸浓度提高,T-P释放率提高．在10％HCl反应条件下,污泥磷释放效果最好,释磷比率为52．2％;10％HzS0t条件下,释磷效果稍差,释磷率为46．0％;10％HNO3与前两者相比,释磷效果最差,释磷率为39．6％．加热和加酸条件下释磷效果的比较结果表明,加酸比加热更有利于T-P释放．在热和酸联合作用下,污泥T-P释放效果更好．在90℃＋2％HCl条件下经2h后,T—P释放率达到96．3％．显微镜观察显示仅仅加热对含磷污泥中微生物的细胞形态破坏得不彻底,但通过加热和加酸联合作用和反应后,微生物细胞被完全破碎．     

耐有机溶剂脂肪酶产生菌的筛选和鉴定

从国内各地采取土样分离筛选产耐有机溶剂脂肪酶的新菌株,通过形态和生理生化特征以及系统进化树分析,筛选到的新菌株命名为Pseudomonas aeruginosa CS-2.来自Pseudomonas aeruginosa CS-2的粗脂肪酶液在乙腈中酶活提高,在苯、氯仿、正己烷、石油醚和异辛烷中表现出较高的稳定性.     

Evaluating the reliability of microsatellite genotyping from low-quality DNA templates with a polynomial distribution model

Molecular studies using trace DNA, such as from museum specimens, ancient or forensic samples and samples obtained noninvasively, often have a common problem of low quality of DNA templates. Amplification errors, such as allelic dropout and false allele, may arise during polymerase chain reaction (PCR) using such samples. A mathematical model which treats homozygotes and heterozygotes discriminately has been developed to measure sample quality and compute the confidence level of using multipletube approaches. We use plucked hair samples collected from 26 individual Sichuan snub-nosed monkeys (Rhinopithecus roxel- lana) to test the model. In this case, a confidence level of 99% can be achieved by three positive PCRs. If the sample quality is very poor and requires many PCR replicates, an alternative multiplestep genotyping method is recommended. This model enables researchers to optimize experimental protocols through pilot studies and obtain reliable genetic information using noninvasive sampling method.     

Temperature-scan cryocrystallography reveals reaction intermediates in bacteriophytochrome

Light is a fundamental signal that regulates important physiological processes such as development and circadian rhythm in living organisms. Phytochromes form a major family of photoreceptors responsible for red light perception in plants, fungi and bacteria. They undergo reversible photoconversion between red-absorbing (Pr) and far-red-absorbing (Pfr) states, thereby ultimately converting a light signal into a distinct biological signal that mediates subsequent cellular responses. Several structures of microbial phytochromes have been determined in their dark-adapted Pr or Pfr states. However, the structural nature of initial photochemical events has not been characterized by crystallography. Here we report the crystal structures of three intermediates in the photoreaction of Pseudomonas aeruginosa bacteriophytochrome (PaBphP). We used cryotrapping crystallography to capture intermediates, and followed structural changes by scanning the temperature at which the photoreaction proceeded. Light-induced conformational changes in PaBphP originate in ring D of the biliverdin (BV) chromophore, and E-to-Z isomerization about the C(15) = C(16) double bond between rings C and D is the initial photochemical event. As the chromophore relaxes, the twist of the C(15) methine bridge about its two dihedral angles is reversed. Structural changes extend further to rings B and A, and to the surrounding protein regions. These data indicate that absorption of a photon by the Pfr state of PaBphP converts a light signal into a structural signal via twisting and untwisting of the methine bridges in the linear tetrapyrrole within the confined protein cavity.     

An Agent-based Adaptive Mechanism for Efficient Job Scheduling in Open and Large-scale Environments

Agent-based scheduling refers to applying intelligent agents to autonomously allocate resources to jobs.Decentralized agent-based scheduling approaches have ach...     

白腐菌对焦化废水中吲哚的降解及其机理

选用白腐菌BP降解吲哚,研究了白腐菌在不同培养基中对两种浓度吲哚的降解过程和机理,以及吲哚的降解与白腐菌漆酶酶活、生物量、培养基pH值的关系.结果显示不同培养基中白腐菌可去除99%以上的吲哚;吲哚去除率与白腐菌漆酶活率具有较好的相关性,白腐菌漆酶活率达到最高时,可去除97%以上的吲哚;高浓度吲哚会抑制白腐菌的生长,同时也激发了白腐菌漆酶的产生,秸秆滤出液能促进白腐菌的生长和漆酶活力的增长;白腐菌BP最适pH值为6~7,pH值在5~8之间对吲哚都具有较强的降解能力;在HPLC谱图3~6 min之间出现的新物质可能有氧化吲哚和靛红.     

基于Unity3D的水下机器人半实物仿真系统

基于Unity3D研制了一种由地面控制终端、机器人本体和三维仿真系统3部分组成的水下机器人半实物仿真系统,为水下机器人开发过程中的性能测试、控制算法分析和人员操作培训提供了仿真和测试平台。该系统采用同一地面控制终端作为三维仿真系统和机器人控制系统的统一指令输入源,以实现虚拟对象和机器人本体的同步工作,可对系统进行实时监测、调参。采用多目视觉技术对机器人位置采集,对传感器数据进行卡尔曼滤波处理。机器人运动仿真试验结果表明,机器人实际运动路径和仿真规划路径基本相同,该系统动态响应性和控制系统同步性较好。