Characterization of dolochar wastes generated by the sponge iron industry

Solid wastes generated by the metallurgical industry contribute significantly towards the enhancement of environmental pollution. The handling, utilization, and safe disposal of these solid wastes are major concerns for the world. Dolochar is such a solid waste generated by the sponge iron industry. Investigations were carried out on the physical, mineralogical, and chemical characteristics for the efficient utilization of dolochar. The detailed studies on physico-chemical properties and petrography were carried out by optical microscopy, X-ray diffraction (XRD), and scanning electron microscopy (SEM). Characterization studies revealed that the dolochar consists of quartz (free as well as locked), free lime, Fe particles, and Ca or Mg and/or Ca+Mg+Fe oxide phases. The washability data of -300 μm dolochar samples indicated that clean coal with 41wt% ash at 18% yield can be produced from dolochar with 78wt% ash. The studies further suggested that the liberation of the dolochar is hard to achieve for clear separation. The dolochar is observed to have high ash fusion temperature and the unburned carbon can be best utilized for power generation.     

Numerical investigation of the effect of transitory strand opening on mixing in a multistrand tundish

In a multistrand, the outlet near the inlet produces short circuiting flow. This leads to the formation of dead zones inside the tundish, and consequently, the mean residence time decreases. In the present study, numerical investigation of mixing inside a delta shaped tundish with sloping boundaries was carried out by solving the Navier-Stokes equation and employing the standard turbulence model. To decrease the dead zone volume inside the tundish, the effect of closing the outlet near the inlet for a small amount of time and further opening it on the mixing behavior of the tundish was studied. The outlets near the inlet were closed for varying amount of time, and the transient analysis of fluid flow and the tracer dispersion study were carried out to find the mixing parameters of the tundish, namely, mean residence time and the ratio of mixed to dead volume of the tundish. An optimum closure time of the near outlet has been found, which yields best mixing inside the tundish. The numerical code was validated against the experimental observation by performing the tracer dispersion study inside a multistrand tundish and the reasonably good match between the experimental and numerical results in terms of residence time distribution (RTD) curves. The results obtained from the present study confirm the strong role of choosing the right time for opening and closing the outlets to get improved characteristics for the fluid flow and mixing behavior of the tundish. The educational version of computational fluid dynamics (CFD) software PHOENICS was used to solve the governing equations and interpret the results in different forms.     

Transient photoconductivity in a-(Se80Te20)100 xAgx (0rxr4) thin films

Bulk material of (Se80Te20)100 xAgx (0rxr4) system was prepared by using a conventional melt quenching technique. Thin films of a-(Se80Te20)100 xAgx (0rxr4) were deposited by the vacuum evaporation technique at a base pressure of 10 4 mbar onto well-cleaned glass substrates. Temperature dependence of electrical conductivity in the temperature range of 263–333 K has been studied. There is increase in the value of conductivity with increase in temperature as well as with Ag content. The measurements of intensity dependence of photoconductivity show that the photoconductivity increases with intensity as a power law where the power is found to be between 0.5 and 1.0, representing the continuous distribution of traps. Rise and decay of photocurrent with time at room temperature at different light intensities for (Se80Te20)98Ag2 thin film samples have also been reported. The results have been explained on the basis of the Dember voltage and interaction between photoexcited holes and the trapped electrons on the surface.     

Colchicine induced interchanges in chillies (Capsicum annuum L.)

Summary Seeds ofCapsicum annuum L. cultivar cerasiformies were treated with 0.4 and 0.2% aqueous colchicine solution for 24 and 72 h respectively. Tetraploids were not realized; instead, interchange heterozygosity was observed in several plants in 0.4% treatment. The interchanges varied from 1 to 3 per plant. It is presumed that colchicine has induced chromosome breaks.     

Karyotype in two himalayan species of polygonatum

Zusammenfassung Die Chromosomenzahl und der Karyotypus vonPolygonatum verticillatum Allioni (2n = 30, 64) undP. cirrifolium Royle (2n = 38), die im Himalaya vorkommen, wurden mit früher untersuchten europäischen Formen verglichen. Die beobachteten Unterschiede lassen sich durch die Annahme erklären, dass die europäischen Formen aus den Himalaya-Formen durch den Vorgang der Chromosomenverminderung und Veränderungen des Karyotypus hervorgingen.     

On the contribution of haemolymph to the salivary proteins of the red cotton bug,Dysdercus koenigii F. (Heteroptera,Pyrrhocoridae)

Summary Polyacrylamide gel electrophoresis of haemolymph and the salivary gland of adult maleDysdercus koenigii has been carried out. The presence of common bands in the electropherograms of the salivary gland and haemolymph shows the possible elaboration of haemolymph protein into the salivary glands as also evidenced by leucomethylene blue incorporation into the salivary gland lobules. The results are discussed in the light of our present state of knowledge.I wish to acknowledge the financial support from the C.S.I.R., New Delhi, India. Grateful acknowledgements are made to Prof. P.S. Ramamurty for encouragements, and to Zoology Department, Banaras Hindu University for the working facilities.     

Effect ofβ-Aminoethylisothiuronium-bromide-hydrobromide on the acetate-1-14C incorporation into tissue lipids of irradiated rats

Zusammenfassung Einfluss von Bestrahlung auf die Lipidsynthese, wobei festgestellt wird, dass der Strahlungsschutzstoff AET die Lipidsynthese hemmt.     

Plasma devices to guide and collimate a high density of MeV electrons

The development of ultra-intense lasers has facilitated new studies in laboratory astrophysics and high-density nuclear science, including laser fusion. Such research relies on the efficient generation of enormous numbers of high-energy charged particles. For example, laser-matter interactions at petawatt (10(15) W) power levels can create pulses of MeV electrons with current densities as large as 10(12) A cm(-2). However, the divergence of these particle beams usually reduces the current density to a few times 10(6) A cm(-2) at distances of the order of centimetres from the source. The invention of devices that can direct such intense, pulsed energetic beams will revolutionize their applications. Here we report high-conductivity devices consisting of transient plasmas that increase the energy density of MeV electrons generated in laser-matter interactions by more than one order of magnitude. A plasma fibre created on a hollow-cone target guides and collimates electrons in a manner akin to the control of light by an optical fibre and collimator. Such plasma devices hold promise for applications using high energy-density particles and should trigger growth in charged particle optics.