Solving the Observing and Downloading Integrated Scheduling Problem of Earth Observation Satellite with a Quantum Genetic Algorithm

This paper addresses the integrated Earth observation satellite scheduling problem. It is a complicated problem because observing and downloading operations are both involved. We use an acyclic directed graph model to describe the observing and downloading integrated scheduling problem.Based on the model which considering energy constraints and storage capacity constraints, we develop an efficient solving method using a novel quantum genetic algorithm. We design a new encoding and decoding scheme that can generate feasible solution and increase the diversity of the population.The results of the simulation experiments show that the proposed method solves the integrated Earth observation satellite scheduling problem with good performance and outperforms the genetic algorithm and greedy algorithm on all instances.     

球状飞射物对屋面瓦片冲击效应的数值模拟

选取典型的球状混凝土飞射物,研究其对一种典型屋面陶土瓦片的冲击破坏作用.基于ANSYS/LS-DYNA平台,参考落球冲击试验方法建立冲击碰撞的有限元计算模型.选取Johnson-Holmquist-Ceramic本构模型模拟陶土瓦片材料,引入单元应变失效准则模拟瓦片破坏情况,采用显式动力学方法研究落球冲击试验中瓦片应力、应变、变形的时变机理.对冲击速度、球块质量、瓦片倾角进行参数分析,结果表明,瓦片最大等效应力与冲击速率及球块质量大致成正比,与瓦片倾角相关性不大.冲击过程是一个能量显著转移的过程,根据损伤方程计算出陶土瓦片能承受不超过34.35m·s~(-1)的来流风速下球状混凝土飞射物的冲击破坏作用.     

Crystal-KMC: Parallel Software for Lattice Dynamics Monte Carlo Simulation of Metal Materials

Kinetic Monte Carlo(KMC) is a widely used method for studying the evolution of materials at the microcosmic level. At present, while there are many simulation software programs based on this algorithm, most focus on the verification of a certain phenomenon and have no analog-scale requirement, so many are serial in nature. The dynamic Monte Carlo algorithm is implemented using a parallel framework called SPPARKS, but it does not support the Embedded Atom Method(EAM) potential, which is commonly used in the dynamic simulation of metal materials. Metal material — the preferred material for most containers and components — plays an important role in many fields, including construction engineering and transportation. In this paper, we propose and describe the development of a parallel software program called Crystal-KMC, which is specifically used to simulate the lattice dynamics of metallic materials. This software uses MPI to achieve a parallel multiprocessing mode, which avoid the limitations of serial software in the analog scale. Finally, we describe the use of the parallel-KMC simulation software Crystal-KMC in simulating the diffusion of vacancies in iron, and analyze the experimental results. In addition, we tested the performance of Crystal-KMC in "meta-Era" supercomputing clusters, and the results show the Crystal-KMC parallel software to have good parallel speedup and scalability.     

心绞痛患者经PCI治疗后不良心脏事件与血清总胆红素水平相关性分析

目的分析心绞痛患者经PCI治疗后不良心脏事件与血清总胆红素水平的相关性.方法选取行PCI的129例心绞痛患者,根据血清TBIL水平将患者分为对照组和观察组,比较两组患者实验室检查指标;比较分析两组患者冠状动脉造影检查结果;比较分析两组患者行PCI的相关指标;比较两组患者发生不良心血管事件(MACE)的情况,并进行Cox比例风险回归分析.结果观察组患者TG,TC水平高于对照组,差异具有统计学意义(P0.05),而其余指标(血糖、Scr、Hb、LDL-C、HDL-C、AST)两组患者比较差异无统计学意义(P0.05);观察组患者冠状动脉病变支数、靶病变部位、慢性闭塞病变及LVEF≤40%与对照组比较差异均无统计学意义(P0.05);观察组患者置入支架长度长于对照组,差异具有统计学意义(P0.05);两组患者经桡动脉途径行PCI者所占比例、置入支架数和置入支架直径与对照组比较,差异无统计学意义(P0.05);术后观察组患者随访期间MACE发生率为24.1%,高于对照组的8.4%,差异具有统计学意义(P0.05);Cox比例风险回归分析结果显示:血清TBIL水平是心绞痛患者PCI后MACE的保护因素,置入支架长度则是危险因素.结论心绞痛患者PCI后血清TBIL水平越低其预后越差;血清TBIL水平是心绞痛患者PCI后MACE的保护因素,置入支架长度则是危险因素.     

石墨烯-碳量子点复合材料的电化学性能研究

采用Hummers法和水热法,制备石墨烯和碳量子点溶液作为前驱体,然后通过一步煅烧法制得石墨烯-碳量子点复合材料。借助SEM、UV-Vis、FTIR等手段,对样品的形貌和结构进行表征;利用循环伏安法(CV)、差分脉冲伏安法(DPV)及恒流充放电循环测试等,重点考察了样品的电化学性能。结果表明,在石墨烯表面负载碳量子点可增加材料的比表面积并改善其机械性能,由于活性位点的增加,所制石墨烯-碳量子点复合电极具有较好的可逆性及电化学活性;在检测不同浓度双氧水时,复合电极的灵敏度为纯石墨烯电极的1.4倍左右;石墨烯-碳量子点复合材料作为锂离子电池负极使用时,与纯石墨烯材料相比具有更好的循环稳定性,且容量保持率提高了1.67倍。     

Alkaline digestion behavior and alumina extraction from sodium aluminosilicate generated in pyrometallurgical process

In pyrometallurgical process, Al-and Si-bearing minerals in iron and aluminum ores are easily transformed into sodium aluminosilicates in the presence of Na₂O constituents, which alters the leaching behaviors of Al₂O₃ and SiO₂. It was confirmed that sodium aluminosilicates with different phase compositions synthesized at various roasting conditions were effectively digested in the alkaline digestion process. Under the optimum conditions at temperature of 100-120℃, liquid-to-solid ratio (L/S) of 10:2 mL/g, caustic ratio of 4, and Na₂O concentration of 240 g/L, the actual and relative digestion ratio of Al₂O₃ from the synthesized sodium aluminosilicates reached maximums of about 65% and 95%, respectively, while SiO₂ was barely leached out. To validate the superior digestion property of sodium aluminosilicate generated via an actual process, the Bayer digestion of an Al₂O₃-rich material derived from reductive roasting of bauxite and comprising Na_1.75Al_1.75Si_0.25O₄ was conducted; the relative digestion ratio of Al₂O₃ attained 90% at 200℃.     

Microstructural characterization and oxidation resistance of multicomponent equiatomic CoCrCuFeNi-TiO high-entropy alloy

CoCrCuFeNi-TiO was prepared by arc melting of the pure elements and Ti₂CO powder under an Ar atmosphere. Both CoCrCuFeNi and CoCrCuFeNi-TiO alloys are composed of a face-centered cubic (fcc) solid solution, whereas the alloys of CoCrCuFeNi-TiO are basically composed of an fcc solid solution and TiO crystals. The microstructures of CoCrCuFeNi-TiO are identified as dendrite and interdendrite structures such as CoCrCuFeNi. The morphology of TiO is identified as an equiaxed crystal with a small amount of added Ti₂CO. By increasing the amount of Ti₂CO added, the TiO content was dramatically increased and part of the equiaxed crystals changed to a dendrite structure. A test of the oxidation resistance demonstrates that the oxidation resistance of CoCrCuFeNi-TiO is better than that of CoCrCuFeNi. However, as the TiO content increases further, a corresponding decrease is observed in the oxidation resistance.     

黄土高原植被建设应从扩大面积向提升质量转变

 自1999年退耕还林还草政策实施以来,黄土高原的植被覆盖显著增加,有效遏制了该区水土流失。目前黄土高原的植被净初级生产力已经接近该区水资源承载力阈值,进一步扩大该区植被建设面积将不可避免地加剧水资源短缺等问题。为进一步巩固退耕还林成果,黄土高原未来的植被建设应从扩大面积向提升质量转变。     

高电压与绝缘技术课程实验教学改革与实践

高电压与绝缘技术课程是电气工程及其自动化专业核心基础课程之一.但该门课程在本科教学过程中存在实验课程结构分配不合理、教学内容体系不健全、教学方式多样性缺乏等核心问题.研究试从教学内容改革、教学设备系统化及教学方式改革等方面入手,完善该课程教育体系,提升本科生的实验动手能力、团队协作能力以及在研究领域的适应能力,提高该课程的实验教学质量,培养新型高素质人才.     

尾矿库溃坝灾害防控现状及发展

尾矿库溃坝灾害应急响应时间短、潜在威胁巨大,往往造成惨重人员伤亡与巨额财产损失.近些年尾矿库安全事故发生数量的总体下降趋势充分体现出现代化技术及安全管理方面的进步,然而重大事故发生频次却不减反增,2015年巴西Samarco铁矿与2014年加拿大Mount Polley重大溃坝事故及其惨重后果,再次为尾矿库安全敲响警钟.我国现存尾矿库8869座,含"头顶库"1425座,安全形势复杂.本文在收集大量相关领域文献的基础上,聚焦尾矿库溃坝灾害防控体系中的安全监测、灾害预警与应急准备、安全管理与标准规范这三大方面核心内容,分别综述对比国内外现状及前沿进展,探讨分析我国当前所面临的问题并尝试提出改进建议,为尾矿库防灾减灾理论研究与技术革新提供参考.结果表明:(1)我国尾矿库安全监测标准更高,但仪器耐久性、可靠度与实用性不足,专用监测器件与新技术的研发应用势在必行;(2)灾害预警方法单一且可信度不高,而信息技术融合应用成为发展趋势;(3)应急管理与预警决策需以充分的科学论证为基础,当前研究在试验手段与计算方法上存在局限;(4)我国拥有完善的安全管理标准规范体系,但在安全等别划分、全生命周期管理、主体变更、事故总结等方面相对欠缺.