低渗透油藏不稳定渗流规律的研究

用无因次分析法对低渗透岩心的实验数据进行了分析 ,得出新的渗流规律。具体表述为 :低于亚临界雷诺数 (Rem=8.5× 10 -5)为非达西渗流 ,其运动方程为v =c(dp/dl) 3 ;高于亚临界雷诺数为达西渗流。从微观角度出发 ,应用边界层理论进一步证实了这一渗流规律。运用新的运动方程 ,建立了低渗透油藏不稳定渗流的数学模型。根据拉氏变换和Stehfest数值反演 ,求得了有限半径井的实空间近似解 ,并应用数值分析方法验证了近似解析方法的可行性。对低渗透油藏的压力动态特征以及边界对压力动态影响的分析结果表明 ,低渗透油层试井曲线的压力动态特征为 :短时曲线与达西渗流模型相似 ,而长时曲线则受到非达西渗流的影响。对于恒压边界油藏 ,压力趋于稳定的时间比达西渗流要迟一些 ;在无限大地层中 ,其导数曲线是一簇平行的倾斜线。对于同一区域低渗透油层试井曲线 ,其导数曲线出现“阶跃”的时间较迟的井区 ,流动系数比较好 ;反之则较差     

凝点附近含蜡原油的粘弹性研究

使用控制应力流变仪 ,在原油凝点附近温度区域对大庆原油和胜利原油进行了线性粘弹性应力范围内的小振幅振荡剪切实验。以原油开始出现线性粘弹性应力区间的最高温度作为基准温度定义了相对温度 ,对粘弹性参数进行了分析对比。研究表明 ,大庆原油及胜利原油在各自凝点以上 4℃时 ,均表现出明显的粘弹性特征 ,其损耗角分别为 37.6 6°和 76 .5 5°。在相同的相对温度下 ,大庆原油的弹性特征明显好于胜利原油 ,大庆原油的粘弹性参数对温度的敏感性也明显好于胜利原油。两种原油粘弹性不同的主要原因是其胶质、沥青质含量和析蜡特性不同。凝点温度附近的原油流变性及其随温度的变化规律应该作为确定输油管道进站温度的重要依据 ,目前 ,仅以原油凝点作为确定进站温度的主要依据是不合理的。     

水力压裂中多裂缝间相互干扰力学分析

将复变函数理论与位错理论相结合 ,在考虑了裂缝表面有流体压力作用且裂缝间存在相互干扰的情况下 ,建立了无限大介质中裂尖应力强度因子的数学模型 ,利用该模型可对水力压裂中多裂缝间的相互干扰进行力学分析。假设裂缝沿着垂直于局部最大周向拉应力方向扩展 ,应用数值方法对所建立的数学模型求解 ,得到裂尖的应力强度因子及转角。数值计算结果表明 ,裂缝间存在相互干扰时所产生的剪切应力强度因子远远小于法向应力强度因子。当两个裂缝尖端垂向距离为零时 ,法向应力强度因子达到最大值。两个裂缝尖端没交叠之前裂缝基本沿着轴线扩展 ;当尖端交叠面积较小时 ,两裂尖偏离自己的轴线向避开对方的方向扩展 ;当尖端交叠面积较大时 ,两裂缝向靠拢对方的方向扩展 ,最终将贯通在一起     

边界单元法三维应力分析计算程序

以三维弹性力学问题的基本解 (Kelvin解 )为基础开发了边界单元法三维弹性应力分析计算程序 ,并对其进行了验证。结果表明 ,该程序可用来求解三维弹性应力问题 ,尤其适用于三维应力集中问题。程序中采用动态分配内存 ,自动选点积分 ,并利用分块解法求解方程组 ,有效地节省了计算机资源 ,扩大了求解问题的规模。     

电弧喷涂铝及铝-锌涂层在动态腐蚀介质中的耐蚀性研究

对钢铁基体表面电弧喷涂铝及铝锌涂层进行了动态腐蚀实验 ,以失质量法计算了腐蚀速度 ,并探讨了腐蚀机理。采用SEM对铝及铝锌涂层腐蚀前后的外表形貌进行了观察 ,并对铝及铝锌涂层表面进行了能谱分析 ,采用电化学系统测试了涂层的自腐蚀电位。实验结果表明 ,在 3 %NaCl水溶液中铝涂层的耐蚀性优于铝锌涂层 ;其原因是铝涂层表面上氧化膜的自愈能力及自腐蚀电位高于铝锌涂层。研究还表明 ,铝及铝锌这些阳极涂层不仅能有效地保护它所覆盖的钢铁表面 ,还能保护暴露于腐蚀介质中的钢铁基体表面。在铝、铝锌涂层上刷涂有机涂料 ,有机涂料能渗透到金属涂层的孔隙中 ,将孔隙封闭。同时 ,有机涂层和金属涂层能构成复合涂层 ,其防腐效果更佳     

Emergent Property in Macromolecular Motion

In this paper, the model of inverse cascade fractal super-blocks along one direction (in the positive or negative) in the 3-dimensional space is developed to describe the self-similar motion in macromolecular system. Microscopically the cohesive and dispersed states of the motion blocks are co- existent states with vastly different probability of occurrence. Experimental results and theoretical analysis show that the microscopic cohesive state energy and dispersed state energy of each motion block are respectively equal to the macroscopic glassy state energy kTg and molten state energy kTm of the system. This singularity unveils topologically the non-integrability, mathematically the anholonomy, and macroscopically the emergent property. This singularity also reveals that the glass, viscoelastic and melt states are three distinct emergent properties of macromolecular motion from a macroscopic viewpoint. The fractal concept of excluded volume is introduced to depict the random motion at various scales in     

Computer Data Processing of the Hydrogen Peroxide Decomposition Reaction

Two methods of computer data processing, linear fitting and nonlinear fitting, are applied to compute the rate constant for hydrogen peroxide decomposition reaction. The results indicate that not only the new methods work with no necessity to measure the final oxygen volume, but also the fitting errors decrease evidently.     

Effect of Carboxymethyl Starch as Stabilizer for Increasing the Stability of Warp Sizing Pastes

The influences of carboxymethyl starch used as stabilizer upon the stability of native cornstarch-polyvinyl alcohol blend pastes for warp sizing have been investigated. The effect of the modified starch on the paste stability was evaluated in terms of the initial demixing time and the volume percentage of separated starch. The carboxymethyl starch with a series of different degrees of substitution was prepared in ethanol dispersion by varying the amount of monochloroacetic acid reacted with refined native cornstarch. The paste stability strongly depends on the modification extent and amount of carboxymethyl starch used, and on native starch content in the paste. Increase in the modification extent and/or the amount of the modified starch effectively retards the phase separation and reduces the separation extent of native cornstarch-polyvinyl alcohol blend pastes. Moreover, the mechanism and favorable modification extent of carboxymethyl starch for enhancing paste stability are also investigated and disc     

Structural Changes of Polyethylene Terephthalate Fibers Grafted by Acrylamide

A group of grafted PET fibers with different graft yield are formed by grafting acrylamide onto the PET main chains. The structure of grafted fibers are studied by scanning electronic microscope ( SEM ), infra-red spectrophotometer ( IR ), and differential scanning calorimetry(DSC). At the same time, the moisture regain, dyeability, strength, and elongation at break of the samples are measured and their relations with structural changes are discussed. Compared with ungrafted fiber, shape of the fiber cross-section, IR characteristic absorption peaks, and melting behavior of the grafted fibers have been changed, causing the fiber dyeability and moisture regain to be increased, and mechanical properties to be changed.