认知无线电中基于潜在博弈的信道分配算法

为最小化认知无线电系统的干扰水平,同时保证主用户的正常通信,提出了一种改进的基于博弈论的分布式信道分配算法,将次用户间的相互博弈构建为潜在博弈模型。效用函数不仅考虑了每个次用户对其他次用户和主用户的干扰,同时也考虑了其他次用户和主用户所产生的干扰。仿真结果表明,该算法具有较好的收敛性,分配结果能使主用户获得较好的吞吐量。     

Thermal detection of surface plasmons on gold nanohole arrays

We used a thin-film thermocouple to detect the thermal effect of surface plasmons excited in Au nanohole array structures.We found that the thermal electromotive force of Au film with periodic nanohole structures is three times greater than that of a bare Au film for 785-nm laser excitation at a given power.This effect is caused by the resonant excitation of localized surface plas- mons in the nanoholes.In addition,we found that the thermal electromotive force(EMF)of the Au film with dumbbell-like na- nohole arrays depends strongly on the incident polarization.The thermal EMF is the greatest when the excitation light is polarized perpendicular to the long axis of the dumbbell.     

Ionic liquids containing the urea moiety for recognition of halides and complex anions

A series of novel imidazolium based ionic liquids containing the urea moiety were designed and synthesized for anion recognition. 1-Ethylurea-3-methylimidazolium acetate ([Eumim]OAc) was used as the receptor for the halides and complex anions (BF4-, PF6-, BPh4-). 1H NMR spectra showed that the urea protons and imidazolium C(2) proton of the receptor ([Eumim]OAc) moved upfield on addition of various anions. A Job plot showed that the [Eumim]OAc receptor formed a 1:1 complex with BPh4-. X-ray diffraction analysis and the molecular modeling study revealed that the conformations of [Eumim]OAc and [Eumim]BPh4 were different. The conformational change of the cation was caused by anion exchange, and may provide an alternative to current methods for recognition of anions.     

Effects of crystallization on corrosion behaviours of a Ni-based bulk metallic glass

The effects of microstructure change on the corrosion behaviours of Ni₅₅Nb₂₀Ti₁₀Zr₈Co₇ bulk glass-forming alloy were investigated in 1 mol/L HCl and 0.5 mol/L H₂SO₄ solutions. Different microstructures of the Ni-based alloy were achieved by annealing the bulk glassy rod prepared by copper mould casting. The microstructure, grain size, grain distribution, and phase composition were characterized. Electrochemical behaviours of the Ni-based alloy were revealed by static immersion and anodic potentiodynamic polarization tests. It is indicated that the corrosion behaviours of the Ni-based bulk glass-forming alloy are related to its microstructures, while the fully crystallized alloy exhibits a relatively lower corrosion resistance than those of the amorphous states.     

Compound machining of silicon carbide ceramics by high speed end electrical discharge milling and mechanical grinding

A compound process that integrates end electrical discharge (ED) milling and mechanical grinding to machine silicon carbide (SiC) ceramics is developed in this paper. The process employs a turntable with several uniformly-distributed cylindrical copper electrodes and abrasive sticks as the tool, and uses a water-based emulsion as the machining fluid. End electrical discharge milling and mechanical grinding happen alternately and are mutually beneficial, so the process is able to effectively machine a large surface area on SiC ceramic with a good surface quality. The machining principle and characteristics of the technique are introduced. The effects of polarity, pulse duration, pulse interval, open-circuit voltage, discharge current, diamond grit size, emulsion concentration, emulsion flux, milling depth and tool stick number on performance parameters such as the material removal rate, tool wear ratio, and surface roughness have been investigated. In addition, the microstructure of the machined surface under different machining conditions is examined with a scanning electron microscope and an energy dispersive spectrometer. The SiC ceramic was mainly removed by end ED milling during the initial rough machining mode, whereas it is mainly removed by mechanical grinding during the later finer machining mode; moreover, the tool material can transfer to the workpiece surface during the compound process.     

Formation and biocorrosion behavior of Zr-Al-Co-Nb bulk metallic glasses

Ni-and Cu-free Zr-Al-Co-Nb glassy alloys with different Nb and Co contents were synthesized by melt spinning and copper mold casting.The effects of Nb addition to partially replace Co in the Zr55Al20Co25 glassy alloy on the glass-forming ability,thermal properties,in-vitro biocorrosion behavior and surface wettability of the metallic glasses were investigated.Although addition of Nb up to 5 at.% slightly decreased the supercooled liquid region and the glass-forming ability(GFA),the alloys could be casted in a bulk glassy rod form with diameters up to 3mm.The Zr-Al-Co-Nb glassy alloys were spontaneously passivated with low passive current densities in phosphate buffered saline and Hanks’ solution.Substitution of "toxic" Co by Nb is effective in improved the corrosion resistance of the Zr-Al-Co glassy alloy.Water contact angle measurements showed that Nb addition increased the hydrophilicity of the glassy alloys,which may enhance cell adhesion of the alloys in biomedical applications.     

Effect of interface morphology on the mechanical properties of titanium clad steel plates

Interface morphology has important influence on the bond quality of titanium clad steel plates. The mechanical properties of titanium clad steel plates with wavy and straight interfaces were investigated by tensile-shear tests and bending tests. The interface morphology of the plates was examined by optical microscopy (OM) and scanning electron microscopy (SEM). The experimental results show that the shear strength of a wavy interface is higher than that of a straight interface. A wavy interface is the guarantee for obtaining high shear strength to provide a greater shear resistance. During the macrobending process, cracks appear in the swirl of the wave tip and ferrotitanium intermetallics. For in-situ observing the bending process by SEM, the wave tip of a wavy interface and the massive ferrotitanium intermetallics of a straight interface are places where cracks initiate and propagate. The results are the same as those observed in the macrobending process. Because of high hardness, the wave tip and the massive ferrotitanium intermetallics are hard in terms of compatible deformation.     

Electromagnetic modification of faceted-faceted Ni<Subscript>31</Subscript>Si<Subscript>12</Subscript>-Ni<Subscript>2</Subscript>Si eutectic alloy

In an electromagnetic field, the morphology of a binary faceted-faceted (FF) Ni31Si12-Ni2Si eutectic microstructure and the alloy’s mechanical properties were investigated. Hardness experiments demonstrated that the solidified ingots were significantly strengthened, and the hardness was improved to 63.1 and 786.6 on the Rockwell hardness C and Vickers hardness scales, respectively. Tests of friction and wear in stirred FF eutectic alloys showed excellent anti-fatigue and anti-adhesion wear performance. Alloy changed from an anomalous microstructure to a refined quasi-regular structure, and there was an increase in the lamellar microstructure fraction. The formation process of the refined quasi-regular microstructure and the resulting mechanical properties were investigated.     

Effect of Ag addition on the thermal stability and glass-forming ability of Zr<Subscript>35</Subscript>Ti<Subscript>30</Subscript>Cu<Subscript>7.5</Subscript>Be<Subscript>27.5</Subscript> bulk metallic glass

The thermal stability and glass forming ability (GFA) of Zr35-xTi30Cu7.5Be27.5Agx (x = 0-10) alloys were studied by X-ray diffraction (XRD), differential scanning calorimetry (DSC) and ultrasonic techniques. We found that the addition of 1 at.% Ag can considerably enhance the GFA as indicated by an increase in the critical glass dimension from 15 mm in the Zr35Ti30Cu7.5Be27.5 alloy to 20 mm in the Zr34Ti30Cu7.5Be27.5Ag1 alloy. However, with the addition of more Ag the supercooled liquid region (△Tx) and y parameter (defined as Tx/(Tg+Tl)) drastically decreased from 155 K and 0.436 to 76 K and 0.363, respectively, resulting in a decrease in the GFA. Additionally, the elastic constant (the ratio of shear modulus to bulk modulus or Poisson’s ratio) was also used as a gauge to evaluate the GFA in Zr35-xTi30Cu7.5Be27.5Agx alloys.     

基于含沙紊动水流掺混长度的含沙量垂线分布

根据Prandtl掺混长度理论对紊流动量传递的假设,推广得到挟沙水流中泥沙扩散对应的含沙紊动水流掺混长度。类比Prandtl动量传递系数与紊流掺混长度的关系,由含沙紊动水流掺混长度推导出与实测数据吻合较好的泥沙扩散系数,得到新的含沙量垂线分布公式,并利用多个海域实测资料对其进行验证。验证结果表明,新的含沙量垂线分布公式能够较客观地反映含沙量垂线分布规律。