水轮机水力稳定性的分析

根据收集国内外水轮机水力稳定性资料 ,分析了引起水轮机水力不稳定性的因素 ,并结合实例分析可能引起的危害 ,最后提出了解决问题的方法和建议     

Machining studies of die cast aluminum alloy-silicon carbide composites

Metal matrix composites (MMCs) with high specific stiffness, high strength, improved wear resistance, and thermal properties are being increasingly used in advanced structural, aerospace, automotive, electronics, and wear applications. Aluminum alloy-silicon carbide composites were developed using a new combination of the vortex method and the pressure die-casting technique in the present work. Machining studies were conducted on the aluminum alloy-silicon carbide (SiC) composite work pieces using high speed steel (HSS) end-mill tools in a milling machine at different speeds and feeds. The quantitative studies on the machined work piece show that the surface finish is better for higher speeds and lower feeds. The surface roughness of the plain aluminum alloy is better than that of the aluminum alloy-silicon carbide composites. The studies on tool wear show that flank wear increases with speed and feed. The end-mill tool wear is higher on machining the aluminum alloy-silicon carbide composites than on machining the plain aluminum alloy.     

P-Fibonacci变换在水印技术中的应用

根据数字水印技术的需要,对水印图像进行置乱。本文提出的P-fibonacci变换简单易实现。根据水印的图像信息自适应的提取P值;满足对任意大小的图像进行置乱,变换后水印信息分布均匀;其图像的还原过程采用矩阵求逆,简单易实现。并给出了Matlab上的实现算法。     

骨料粒径与ASR膨胀关系及计算研究进展

综述了骨料粒径与碱硅酸反应(ASR)膨胀关系的研究现状,对现有研究的局限性和存在的问题进行了分析,阐述了进一步开展骨料粒径与ASR膨胀关系研究的必要性.重点介绍了ASR膨胀理论的研究方法,分别从材料层次和结构层次介绍了不同计算模型的思路、基本原理、基本假设和关键参数,指出了各自的优缺点和适用范围.最后通过对比分析,认为无论是材料层次还是结构层次的模型,在模拟ASR膨胀时均存在着一定的缺陷,并指出为了建立更为合理、适用性更强的ASR膨胀模型,应当同等重视微观的化学反应本身及宏观的物理膨胀过程.     

Chiral pyrrolidine-azole conjugates: Simple and efficient asymmetric organocatalysts for Michael addition to nitrostyrenes

Simple pyrrolidine-azole conjugates have been synthesized and found to be efficient catalysts for asymmetric Michael addition to nitrostyrenes. The identified optimal catalysts, pyrrolidine-azoles 2, 8 and 13, could catalyze the asymmetric Michael addition of a range of Michael donors and nitrostyrenes in high yields (up to 99%) and excellent stereoselectivities (up to 99:1 dr and 97% ee).     

Entanglement dynamics and transfer in a double Jaynes-Cummings model

We study the entanglement dynamics for a double Jaynes-Cummings model where two entangled atoms A and B locally interact with independent cavities a and b, respectively, but there are no interactions between locations Aa and Bb. We point out that there exists a parameter range in which simultaneous pairwise entanglement sudden death (ESD) for remote parties, i.e. AB, ab, Ab and Ba, may occur. We show that during this simultaneous ESD period various multipartite entanglement can be created. Our results imply that the pairwise entanglement between two independent locations may be transferred into other multipartite forms which account for the correlations between the two independent locations.     

A novel self-promoted Morita-Baylis-Hillman-like dimerization

While stable in CH₂Cl₂, hexane or THF, in the presence of MeOH, self-promoted dimerization of the triarylphosphine-alkene 1, a ligand for Pd-catalyzed reactions, produced an unusual racemic bis(phosphine) 2 in high yield. The reaction of 2 with Pd(dba)₂, followed by oxidative addition of p-IC₆H₄NO₂, yielded a trans-chelated Pd(II) aryl iodide complex.     

Temperature variability since A.D. 1837 inferred from tree-ring maximum density of <Emphasis Type="Italic">Abies fabri</Emphasis> on Gongga Mountain,China

Two tree-ring MXD (maximum latewood density) chronologies of Abies fabri were developed from the eastern slopes of Gongga Mountain, and a regional chronology (RC) was established based on the two MXD chronologies. There were significant positive correlations between the three MXD chronologies and August–September temperature, and the RC had the highest correlation (r=0.733, n=48, P<0.001) with mean August–September temperature. Based on growth-climate analyses, we reconstructed mean August–September temperature during the past 171 years for the study area. The reconstruction explained 53.5% of the instrumental temperature variance during the period 1960–2007 (F=52.8, R²_adj =52.4%). In the past 171 years, there were 22 very warm years and 23 very cold years, four cold periods (1837–1842, 1884–1891, 1899–1905 and 1984–1989) and three warm periods (1966–1973, 1916–1924 and 1876–1881). Our reconstruction was validated by other tree ring-based temperature reconstructions from the surrounding area and documented climate disaster events.     

Synthesis and photo-responsive behaviors of hollow polyazobenzene micro-spheres

By means of distillation precipitation polymerization, the silica-hybrid particles with polyazobenzene shell (PAzo@SiO₂) micro-spheres were prepared with 6-(4-methoxy-4′-oxy-azobenzene) hexyl methacrylate (Azo-M) as monomer, divinylbenzene (DVB) as cross-linker, and ~250 nm vinylated sol-gel silica particles as template. Hollow polyazobenzene microspheres were further developed after selective removal of the silica cores with HF solution. When the content of DVB related to Azo-M is 20 wt%, the acetonitrile is 200 mL, and the polymerization time is 4.5 h, the hollow PAzo microspheres with about 20 nm shell are successfully fabricated. These hollow PAzo microspheres have excellent reversible photoisomerization, and their first-order rate constant of trans-cis isomerization only decreases 11.8% compared with homopolymer of azobenzene (Homo-PAzo).     

Influence of isothermal aging on σ precipitation in super duplex stainless steel

The time-temperature-transformation (TTT) curve of the 00Cr25Ni7Mo4N duplex stainless steel was obtained with a Formastor-digital thermal dilatometer, and the influence of isothermal aging on σ precipitation was studied by metallographic observation, X-ray diffraction (XRD), and transmission electron microscopy (TEM). The results show that the decomposition of ferrite phase is accompanied by the formation of σ phase at 750–1000℃, especially in the range of 800–900℃. The longer the aging time, the higher the amount of σ precipitation. The area fraction of various phases remains at a certain value upon the completion of ferrite deformation. The temperature of 850℃ is the most sensitive transaction temperature, the incubation time for the formation of σ precipitation is less than 1 min, and aging for 20 min leads to the complete transformation of ferrite. The σ phase is formed preferentially at the α/α/γ junction, and then grows along the α/α boundary in the matrix.