静注西咪替丁对十二指肠溃疡出血患者24h胃内pH值的影响

１５例十二指肠球部溃疡出血的患者随机分为３组,分别静脉注射不同剂量的西咪替丁（Ｃｉｍｅｔｉｄｉｎｅ）并以生理盐水作为对照,用２４ｈ胃内监测仪来观察用药对胃酸分泌的影响。结果显示：各用药组的胃内ｐＨ值均有升高,各组间差异有显著性意义（Ｐ＜０００１）。各用药组ｐＨ值均高于对照组（Ｐ＜０００１）,只有药量达１６００ｍｇ／ｄ时才有满意抑酸效果,抑酸时间为（１９３±４７）ｈ,胃内ｐＨ值均数为６４±０９。     

Diamond synthesis from a system of chromium-carbide and Ni70Mn25Co5 alloy

In order to ascertain the mechanism of interaction between carbide and metallic catalyst and formation of diamond under high pressure and high temperature, and find a new method to synthesize diamond with special properties, it is necessary to investigate the reaction behavior of different carbides and metallic solvent_catalysts under high pressure and high temperature. A system of Cr-3C-2 powder and Ni 70Mn 25Co 5 alloy in weight ratio of 1∶6 was treated under 6 0 GPa and 1 500℃ for 20, 30 or 60 min respectively. X_ray diffraction of the samples indicated the Cr 3C 2 decomposed partially after high pressure and temperature treatment, and Cr 7C 3, Cr and diamond formed respectively. There was not any trace of graphite in the samples. The result suggested that the separated carbon atoms could form diamond directly without conversion process of graphite into diamond. The observation of SEI, WDX and EDX also showed that diamond crystals were synthesized in the system, which have perfect surfaces and shapes, with the average grain size of about 40 μm. The properties of the crystals are being investigated.     

Preliminary study on climatic signals of stable isotopes from Holocene speleothems under monsoon condition

Within the East Asian monsoon zone the change in oxygen isotope of Holocene stalagmite is mainly related to monsoon rain rather than to temperature. And carbon isotope can be taken as a comprehensive signal which contains the natural information and the information of anthropogenic activity. Isotopic analysis is also compared with the annual layer records.     

活塞数控系统控制软件的设计

介绍了中凸变椭圆活塞数控车削系统的构成及特点、活塞加工原理、控制软件的设计等项内容。汽车发动机活塞的形状复杂,传统的靠模加工法柔性差,不能满足现在汽车类型多样化、产品更新换代快的要求。本文所介绍的数控系统很好地解决了这一问题,它采用多级ＣＰＵ的控制方法和多层次模块化的软件设计思想,很好地满足了活塞加工的要求,并且具有功能强大、界面友好、活塞设计数据的输入和修改方便、柔性好等特点。该系统现已通过了工厂７２ｈ考机,并形成了正式产品。     

一种同步转速状态测定方法及其实现

提出一种同步转速状态测定方法．基于该方法设计了采用霍尔传感器的单片机测量系统．实现了对双螺旋推进器的转速和瞬时相差的准确测量,解决了无法预报“碰撞”现象的难题     

干湿循环法制备抗菌性 5A 沸石

本文探索了制备抗菌性沸石的新方法———干湿循环处理法,采用５Ａ沸石分别与抗菌性离子Ｚｎ２＋、Ａｇ＋、Ｃｕ２＋的溶液进行干湿循环处理,制备抗菌性５Ａ沸石。研究了反应条件,如温度、浓度、循环次数对沸石中抗菌性离子含量的影响,找出了最佳反应条件。测试了抗菌性５Ａ沸石的耐洗涤性能和抗菌性５Ａ沸石对黑曲霉菌、大肠杆菌及嗜热脂肪芽胞杆菌的抗菌效果。研究结果表明,干湿循环法制备抗菌性沸石,具有抗菌性离子含量多,抗菌性能好,方法简便,反应时间短,节约原料等优点。     

一些含指数函数的函数方程（Ⅰ）

本文确定满足条件ｆ（ｘｙｚ）＝ｆ（ｘｚｙ）的方程ｆ（ｘｙ）＋ｆ（ｘｙ－１）－［Ψ（ｙ）＋Ψ（ｙ）－１］ｆ（ｘ）＝ｇ（ｘ）ｈ（ｙ）的一般解．     

平面药包的最佳间距

在矿山剥离、场地平整以及建(构)筑物基坑开挖等露天爆破中,为了充分利用炸药能量将岩石松动或抛掷到一定区域,并确保底板满足一定平整度要求,按照爆破技术设计和工程质量要求,需要设计平面布药结构.本文通过在施工现场进行的大量小型模拟实验,对平面药包间、排距与爆破漏斗的开口面积、可见深度、爆岩的抛掷距离和堆积形态等关系进行了系统分析与研究.实验结果表明,当平面药包间、排距满足一定范围时,爆破漏斗的可见深度较小,而开口面积和抛掷距离最大,爆堆形态较好.平面布药结构存在一个有利于抛掷堆积的最佳间、排距.     

粗糙集方法在基于属性分类中的应用

介绍粗糙集基础上的属性分类系统的构造,给出一种数据挖掘中新的分类方法:从初始的数据信息出发,依次构造约简属性集,并对其使用Bayes判别法进行基于属性的分类。最后给出了实例,验证算法的可行性。     

锅炉炉膛防爆控制系统探析

介绍了炉膛爆炸的原因及防止措施，分析了传统炉膛压力控制系统的缺点，从高压保护回路、压力控制系统、运行程序、联锁系统等方面论述了新型炉膛防爆控制系统。