Long term monitoring of urban subsidence by Permanent Scatterer DInSAR

When using differential SAR interferometry (DInSAR) to monitor the surface deformation over a long time scale, it is often strongly affected by the spatial and temporal decorrelations and atmospheric dishomogeneities. The recently developed Permanent Scatterers (PS) technique proposed by Fertti et al. can overcome these difficulties by interpreting time-series of interferometric phase only at coherent point scatterers. In this study, we apply this PS technique using 25 ERS-1/2 scenes from 1992 to 2000 to monitor the subsidence in Suzhou. By using the linear deformation model, the deformation map in Suzhou urban area over the eight years is obtained. And the calculated results are in good agreement with the measurements of leveling.     

Effects of self evaluation on late ERP components

High-density event-related potentials (ERPs) were measured when participants were required to evaluate oneself, significant others (father and mother) and the most familiar public figures (Lei Feng and Jiang Qing) based on trait adjectives. There were three referential conditions and a non-referential control condition including self-evaluation (SE), significant other-evaluation (SOE), general other-evaluation (GOE), and semantic positivity-evaluation (SPE). The behavioral data showed that RTs to GOE condition were longer than the other three conditions. Scalp ERP analysis revealed that (1) SPE condition elicited a more negative N2 than SE condition, which was associated with inhibition of responses; (2) SE condition elicited a more positive P300 than SPE condition, which was an index of attention to self-relevant stimuli; (3) there was no difference on the amplitude and latency of P300 between SE and SOE conditions, which reflected that the concept of “self” included intimate others (e.g., father and mother) in Chinese culture.     

改善20CrMnTiH淬透性的研究

莱钢特钢厂20CrMnTiH钢材成分波动较大,淬透性带HRC8～10,范围较大,制约了齿轮钢质量的进一步提高.通过研究,发现铸坯中心偏析尤其是碳偏析为主要问题.通过工艺优化采取各项措施,尤其增加电磁搅拌后,中心碳偏析得到明显改善;C控制在0.19%～0.20%的炉次达到了95.6%;淬透性带控制在HRC6内的达到了92.1%;在HRC4内的达到了86.2%;提高了产品质量,满足了用户需求.     

三维光盘存储系统中双光头同步控制的频域分析与辨识

详细介绍了双光头同步控制原理.对采集的伺服模块聚焦误差跟踪信号及共焦模块读写光头的聚焦线圈驱动信号进行了频域分析,并以此两路信号作为系统输入输出,分别对三种参数模型进行参数优化.根据3种模型的频率响应及阶跃响应,选择双光头同步控制过程的参数模型为[450]阶的ARX模型.实测曲线与模型仿真结果符合度(fit)为78.0259%.     

试析仲裁简易程序的适用条件

虽然我国各仲裁委员会在实践中大量适用仲裁简易程序,但我国法学理论界却很少对其时代内涵进行界定,对其适用条件也缺乏探讨,因而制约了仲裁简易程序的研究和发展。本文在分析仲裁简易程序时代内涵的基础上,从主观条件和客观条件两方面对仲裁简易程序的适用条件进行了探讨,建议规范我国仲裁简易程序的适用条件,实现仲裁简易程序的和谐价值取向。     

合金铸铁激光处理的探讨——Ⅱ.激光辐照工艺参数的控制

用热传导方程控制激光辐照温度,建立了一种新回归方程以控制激光辐照硬化深度,选用卡尔丹公式列热传导方程及同归方程联立求解,可得到同时满足一定的硬化深度及表面最高温度双重要求的工艺参数,此种方法可作为激光硬化处理工艺参数的控制或预报,对本合金铸铁的激光硬化处理,其表面温度的下限应大于其熔点温度,即以表面产生微熔的快速冷凝处理为宜,并以选取低功率慢扫描为最佳。     

高分辨率谱估计算法MUSIC和Minimum-Norm及性能比较

本文从理论上详细叙述了高分辨率谱估计技术MUSIC和Minimum-Norm算法的机理,给出并比较了它们的空域谱平坦度、3dB谱宽度和谱峰值随信噪比的变化情况.文章对工程设计人员加深理解、选择算法具有一定的参考意义.     

一种新的基于Kohonen网络的图像矢量量化

矢量量化是一种重要的数据压缩方法.本文利用Kohonen自组织映射神经网络进行矢量量化,首次较为详细地讨论了具体实现的步骤与细节,并在此基础上为改善边缘质量,提出一种基于Laplas算子检测边缘弓引导神经网络训练的方法,并通过实验证明其效果是明显的.     

并行算法软件库PASL

本文介绍了并行算法软件库ＰＡＳＬ。ＰＡＳＬ库运行在具有共享存储的多处理机上，它可以用于科学工程计算和仿真。     

权重分析系统

本文利用加权模糊区间统计方法,对决策指标权重进行了讨论,并引入关联度的概念讨论了各专家的偏离度及一致性。