Diamond synthesis from a system of chromium-carbide and Ni70Mn25Co5 alloy

In order to ascertain the mechanism of interaction between carbide and metallic catalyst and formation of diamond under high pressure and high temperature, and find a new method to synthesize diamond with special properties, it is necessary to investigate the reaction behavior of different carbides and metallic solvent_catalysts under high pressure and high temperature. A system of Cr-3C-2 powder and Ni 70Mn 25Co 5 alloy in weight ratio of 1∶6 was treated under 6 0 GPa and 1 500℃ for 20, 30 or 60 min respectively. X_ray diffraction of the samples indicated the Cr 3C 2 decomposed partially after high pressure and temperature treatment, and Cr 7C 3, Cr and diamond formed respectively. There was not any trace of graphite in the samples. The result suggested that the separated carbon atoms could form diamond directly without conversion process of graphite into diamond. The observation of SEI, WDX and EDX also showed that diamond crystals were synthesized in the system, which have perfect surfaces and shapes, with the average grain size of about 40 μm. The properties of the crystals are being investigated.     

Preliminary study on climatic signals of stable isotopes from Holocene speleothems under monsoon condition

Within the East Asian monsoon zone the change in oxygen isotope of Holocene stalagmite is mainly related to monsoon rain rather than to temperature. And carbon isotope can be taken as a comprehensive signal which contains the natural information and the information of anthropogenic activity. Isotopic analysis is also compared with the annual layer records.     

Molecular cloning and nucleotide sequence of classical swine fever virus strain Shimen

According to the previously published CSFV sequences, 18 paris of partially overlapping primers which span the entire genome of CSFV strain Shimen were designed and synthesized. Each cDNA fragment of strain Shimen was amplified by RT-PCR method from the anticoagulant blood of strain Shimen infected pig. The PCR fragments were cloned into pGEM-T vector respectively and sequenced. The results show that we have obtained the nucleotide sequence of strain Shimen. The viral RNA consists of 12 297 nucleotides including noncoding regions of 373 and 227 bases at the 5′ and 3′ end, respectively, and a single large open reading frame spanning 11 697 nucleotides in the middle, which encodes an amino acid sequence of 3 989 residues with a calculated molecular weight of 437.6×10³. The precisely sequencing of 5′ and 3′ termini is undertaking. Supported by the National Pandeng Project Huang Qianhua: born in 1968. Graduate student     

化学活性表面的分形研究

利用近十年来兴起的分形几何学,对固体表面进行了研究,指出固体表面的粗糙程度及不规则性可以用分形维数给予很好的定量描述,并给出了测定化学活性固体表面分形维数的方法。     

关于碳化硅作为超低碳钢连铸结晶器保护渣熔速调节剂的研究

本文研究了碳化硅（SiC）作为保护渣熔速调节剂的特性及作用机理,研究表明,以SiC替代炭质材料可大大降低保护渣对超低碳钢连铸坯的增碳和渗碳量。     

关于傅科摆相对运动轨迹的讨论

根据傅科摆确定的起始条件,正确导出其轨迹方程,并用计算机画出其相对运动轨迹曲线。同时推证得摆锤在最大幅角位置时,其相对速度为零这一重要特征。     

一种同步转速状态测定方法及其实现

提出一种同步转速状态测定方法．基于该方法设计了采用霍尔传感器的单片机测量系统．实现了对双螺旋推进器的转速和瞬时相差的准确测量,解决了无法预报“碰撞”现象的难题     

对电子束蒸发沉积的ZnO：Al膜电学性能的研究

使用电子束蒸发法沉积了铝掺杂的氧化锌透明导电膜。     

干湿循环法制备抗菌性 5A 沸石

本文探索了制备抗菌性沸石的新方法———干湿循环处理法,采用５Ａ沸石分别与抗菌性离子Ｚｎ２＋、Ａｇ＋、Ｃｕ２＋的溶液进行干湿循环处理,制备抗菌性５Ａ沸石。研究了反应条件,如温度、浓度、循环次数对沸石中抗菌性离子含量的影响,找出了最佳反应条件。测试了抗菌性５Ａ沸石的耐洗涤性能和抗菌性５Ａ沸石对黑曲霉菌、大肠杆菌及嗜热脂肪芽胞杆菌的抗菌效果。研究结果表明,干湿循环法制备抗菌性沸石,具有抗菌性离子含量多,抗菌性能好,方法简便,反应时间短,节约原料等优点。     

一些含指数函数的函数方程（Ⅰ）

本文确定满足条件ｆ（ｘｙｚ）＝ｆ（ｘｚｙ）的方程ｆ（ｘｙ）＋ｆ（ｘｙ－１）－［Ψ（ｙ）＋Ψ（ｙ）－１］ｆ（ｘ）＝ｇ（ｘ）ｈ（ｙ）的一般解．