Enhanced urease inhibition activity of Ag nanomaterials capped with N-substituted methyl 5-acetamido-β-resorcylate

Medically, bacterial ureases are important virulent factors and are used for treatment of peptic ulcers and urinary tones. Reported urease inhibitors are associated with various side effects including antibiotic resistance as a major one. Still there is an urgent need to synthesize new urease inhibitors. In this context we have synthesized new urease inhibitor i.e. AgL that is composed of Ag nanomaterials capped with N-substituted methyl 5-acetamido-β-resorcylate(L). The conjugation of L to silver was confirmed through FTIR, UV–vis and TEM analysis.Bare silver nanomaterials(Ag) were also prepared. The stability of AgL nanostructures was determined against various parameters(temperature, high salt concentration, pH) and found to be stable. The in vitro antimicrobial(antibacterial, antifungal), enzyme inhibition(xanthine oxidase, urease, carbonic anhydrase, α-chymotrypsin,cholinesterase) and antioxidant activities of AgL were investigated and compared with Ag, L and standard drugs.In comparison to other bioactivities, AgL shows statistically enhanced selective enzyme inhibition activity against urease enzyme. Urease inhibition activity of AgL was significantly greater than standard drug(thiourea),L and Ag. On a per weight basis, AgL required about 11–18 times less amount of L for inhibition of urease enzyme.     

Mechanical and Thermal Properties of Apocynum and Ramie Fiber Mat Reinforced Polylactic Acid Composites

With the increasing awareness of environmental protection and rational utilization of resources, natural fiber reinforced composites have shown broad development prospects. Apocynum fiber, known as the "king of wild fiber", not only has moisture absorption, air permeability, and good mechanical properties but also has many health-related advantages such as antibacterial properties. In this study, four types of needle-punched Apocynum fiber and ramie fiber mat reinforced polylactic acid(PLA) composites were fabricated. Mechanical and thermal properties of the composites were tested and analyzed. The results showed that compared with those of the ramie fiber finish needle-punched mat reinforced composites, the tensile strength and the tensile modulus of Apocynum fiber finish needle-punched mat reinforced composites had increased by 15.3% and 60.1%, respectively. In comparison, the bending strength and the bending modulus were decreased by 21.8% and 7.6%, respectively. Moreover, compared with the Apocynum fiber finish needled-punched mat reinforced composites and the ramie fiber finish needle-punched mat reinforced composites, the Apocynum 50/ramie 50 finish needle-punched mat reinforced composites had the best tensile and bending properties. The after-fracture morphology was detected by a scanning electron microscope(SEM). The thermal properties of the composites were also characterized. It was found that the thermal properties of the four types of composites showed very similar behaviors.     

Liquid-phase aerobic oxidation of benzyl alcohol catalyzed by mechanochemically synthesized manganese oxide

Benzyl alcohol oxidation by molecular oxygen using solid manganese oxide as a catalyst and n-heptane as the solvent was studied in the liquid phase. The catalyst was synthesized by a simple mechanochemical process at room temperature and was characterized by different physical methods. The catalyst was highly active and 100% selective for benzyl alcohol conversion to benzaldehyde. The solid catalyst can be recovered from the reaction mixture by simple filtration and can be re-used. We found n-heptane to be an excellent solvent for the oxidation reaction, and that the catalyst did not leach into solution.     

Structural and dielectric properties of doped ferrite nanomaterials suitable for microwave and biomedical applications

The sol–gel auto-combustion method was adopted to synthesize nanomaterials of single-phase X-type hexagonal ferrites with the composition of Sr2?xGdxNi2Fe28?yCdyO46 (x=0.00, 0.02, 0.04, 0.06, 0.08, 0.10 and y=0, 0.1, 0.2, 0.3, 0.4, 0.5). The structural properties were carried out by XRD analysis and the lattice parameters show variation with the doping of Gd–Cd. The average particle size measured by TEM was in the range of 8–10 nm which is beneficial in obtaining suitable signal-to-noise ratio in recording media and biomedical applications. The room temperature resistivity enhanced with the increase of the dopant concentration. The increase in resistivity indicates that the synthesized materials can be considered good for the formation of the multilayer chip inductors (MLCIs) as well as for the reduction of eddy current losses. The dielectric constant decreased with the increase in the frequency which is the general reported trend of the hexagonal ferrites and can be explained on the basis of Koop?s theory and Maxwell–Wagner polarization-model. The abnormal dielectric behavior indicates the formation of small polarons in the material. The maximum value of tangent loss at low frequencies reflects the application of these materials in medium frequency devices (MF).     

Structural,morphological, Raman,optical, magnetic,and antibacterial characteristics of CeO<Subscript>2</Subscript> nanostructures

In this study, CeO₂ nanostructures were synthesized by a soft chemical method. A hydrothermal treatment was observed to lead to an interesting morphological transformation of the nanoparticles into homogeneous microspheres composed of nanosheets with an average thickness of 40 nm. Structural analysis revealed the formation of a single-phase cubic fluorite structure of CeO₂ for both samples. A Raman spectroscopic study confirmed the XRD results and furthermore indicated the presence of a large number of oxygen vacancies in the nanosheets. These oxygen vacancies led to room-temperature ferromagnetism (RTFM) of the CeO₂ nanosheets with enhanced magnetic characteristics. Amazingly, the nanosheets exhibited substantially greater antibacterial activity than the nanoparticles. This greater antibacterial activity was attributed to greater exposure of high-surface-energy polar surfaces and to the presence of oxygen vacancies.     

Structural, electrical, dielectric and magnetic properties of Mn-Nd substituted CoFeO3 nano sized multiferroics

A series of Mn x Co_(1-x) Fe_(1-y) Nd_yO_3(where x=0.0–1.0 y=0.0–0.1) multiferroic nanocrystals was synthesized via sol-gel auto-combustion technique. The structure was confirmed by X-ray diffraction(XRD)while morphology was investigated by scanning electron microscopy(SEM). The electrical resistivity was observed to increase from 2.14 * 10~7 to 8.77 * 10~9 Ω-cm and activation energy was found to increase from 0.64 to 0.75 e V, while the drift mobility decreased from 4.75 * 10~(-13) to 1.27 * 10~(-15)cm~2V~(-1)S~(-1) by the substitution of Mn and Nd contents. The dielectric constant, dielectric loss and dielectric loss factor decrease with frequency and Mn-Nd contents. The saturation magnetization was increased from 34 to 70 emu g~(-1) while the coercivity decreased from 705 to 262 Oe with the increase of substituents.The increase in electrical resistivity and saturation magnetization while decrease in dielectric parameters and coercivity make these nanomaterials suitable for applications in microwave devices and longitudinal magnetic recording media.     

Quantitative estimation of dust fall and smoke particles in Quetta Valley

Tightening of air quality standards for populated urban areas has led to increasing attention to assessment of air quality management areas, where violation of air quality standards occurs, and development of control strategies to eliminate such violation of air quality standards. The Quetta urban area is very densely built and has heavy motorized traffic. The increase of emissions mainly from traffic and industry are responsible for the increase in atmospheric pollution levels during the last years. The dust examined in the current study was collected by both deposit gauge and Petri dish methods at various sites of Quetta Valley. Smoke particles were obtained by bladder method from the exhausts of various types of motor vehicles. The concentration of lead found in the smoke ranged from 1.5×10⁻⁶ to 4.5×10⁻⁶.     

De novo hem- and lymphangiogenesis by endothelial progenitor and mesenchymal stem cells in immunocompetent mice

Cellular pro-angiogenic therapies may be applicable for the treatment of peripheral vascular diseases. Interactions between mesenchymal stem cells (MSCs) and endothelial progenitor cells (EPCs) may provide such a treatment option. With the exception of some studies in man, experiments have only been performed in immunodeficient mice and rats. We studied an immunocompetent syngeneic mouse model. We isolated MSCs from bone marrow and EPCs from the lung of adult C57/Bl.6 mice and co-injected them in Matrigel subcutaneously in adult C57/Bl.6 mice. We demonstrate development of both blood vessels and lymphatics. Grafted EPCs integrated into the lining of the two vessel types, whereas MSCs usually did not incorporate into the vessel wall. Injections of each separate cell type did not, or hardly, reveal de novo angiogenesis. The release of VEGF-A by MSCs has been shown before, but its inhibitors, e.g., soluble VEGF receptors, have not been studied. We performed qualitative and quantitative studies of the proteins released by EPCs, MSCs, and cocultures of the cells. Despite the secretion of VEGF inhibitors (sVEGFR-1, sVEGFR-2) by EPCs, VEGF-A was secreted by MSCs at bioavailable amounts (350 pg/ml). We confirm the secretion of PlGF, FGF-1, MCP-1, and PDGFs by EPCs/MSCs and suggest functions for VEGF-B, amphiregulin, fractalkine, CXCL10, and CXCL16 during MSC-induced hem- and lymphangiogenesis. We assume that lymphangiogenesis is induced indirectly by growth factors from immigrating leukocytes, which we found in close association with the lymphatic networks. Inflammatory responses to the cellular markers GFP and cell-tracker red (CMPTX) used for tracing of EPCs or MSCs were not observed. Our studies demonstrate the feasibility of pro-angiogenic/lymphangiogenic therapies in immunocompetent animals and indicate new MSC/EPC-derived angiogenic factors.     

Genome-wide association study identifies 12 new susceptibility loci for primary biliary cirrhosis

In addition to the HLA locus, six genetic risk factors for primary biliary cirrhosis (PBC) have been identified in recent genome-wide association studies (GWAS). To identify additional loci, we carried out a GWAS using 1,840 cases from the UK PBC Consortium and 5,163 UK population controls as part of the Wellcome Trust Case Control Consortium 3 (WTCCC3). We followed up 28 loci in an additional UK cohort of 620 PBC cases and 2,514 population controls. We identified 12 new susceptibility loci (at a genome-wide significance level of P < 5 × 10??) and replicated all previously associated loci. We identified three further new loci in a meta-analysis of data from our study and previously published GWAS results. New candidate genes include STAT4, DENND1B, CD80, IL7R, CXCR5, TNFRSF1A, CLEC16A and NFKB1. This study has considerably expanded our knowledge of the genetic architecture of PBC.