Facile cathodic electrosynthesis and characterization of iron oxide nano-particles

Fe2O3 nano-particles have been synthesized by simple cathodic electrodeposition from the low-temperature nitrate bath.The morphology and crystal structure of the obtained oxide powder were analyzed by means of scanning and transmission microscopy(SEM and TEM),X-ray diffraction(XRD) and Fourier transform infrared(FTIR) spectroscopy.Thermal behavior and phase transformation during the heat treatment of as-deposited sample were investigated by differential scanning calorimetry(DSC) and thermogramimetric analysis(TGA).The results showed that the deposited Fe2O3 was composed of the nanoparticles with grain size of approximately 10-60 nm.A serious problem during cathodic electrodeposition of iron oxide was splashing of deposit into electrolyte due to its low adhesion.This problem was tackled by reducing the bath temperature and dielectric constant of solvent.     

Bilirubin sensor based on CuO-CdO composites deposited in a nafion/glassy carbon electrode matrixes

Copper oxide-cadmium oxide nanocomposites(CuO-CdO NCs) were synthesized by solvothermal technique in a basic medium. CuO-CdO NCs were characterized using conventional techniques, such as Fourier Transform Infrared Spectroscopy(FTIR), UV–Visible Spectroscopy(UV/Vis), Field-Emission Scanning Electron Microscopy(FESEM), X-ray electron dispersive spectroscopy(XEDS), X-ray photoelectron spectroscopy(XPS), and powder X-ray diffraction(XRD). A selective and enzyme-less Bilirubin(BLR) sensor was developed with a thin-layer of NCs onto a glassy carbon electrode(GCE, surface area = 0.0316 cm~2) using 5% nafion binders at room conditions. Improved electrochemical performances of higher sensitivity, lower detection limit,linear dynamic range(LDR), and long-term stability of preferred BLR were achieved by a reliable currentvoltage(I-V) approach. The calibration curve was found linear(R~2= 0.9347) in a wide range of BLR concentration(10.0 pM ~ 10.0 mM). Based on the signal to noise ratio value of 3, the sensitivity and limit of detection(LOD) of the sensor were calculated as 95.0 pA μM~(-1) cm~(-2) and 1.0 ± 0.1 pM respectively.Solvothermally synthesized CuO-CdO NCs/GCE is an excellent advancement of developing a selective and sensitive BLR sensor by electrochemical approach and practically implemented in real sample applications.     

Evaluating the Impacts of Virtual Organization Absorption on the Quality of Urban Private Constructions; the System Dynamics Approach

Quality compliance checking of urban private constructions in Iran follows a fragmented pattern. By considering this fragmentation along with the inherent complexities of the quality compliance checking, it becomes urgent to look closer at this mechanism to find a way for making improvements. Since there is no determination to change the existing mechanism, this study discusses the use of virtual organizations as a strategy to enhance the level of quality. To this end, according to the intended approach for developing virtual organizations, this study identifies the capabilities of this type of systems in the first step. Then, this research evaluates the impacts of virtual organization absorption on the quality of urban private constructions. In this evaluation, the paper applies the system dynamics approach as the modeling tool due to its ability to address complexities and feedback structures. The resulted dynamic model needs initial values and requires functions to be able to run the simulation. In this case, the Delphi Technique is used to extract the functions and the values. After importing the resulted values and functions into the model, the focus group is used for the validation. The result of this analysis represents the positive impacts of the virtual organization absorption in the quality compliance checking mechanism. Fifty-percent improvement in the quality level of urban private constructions after a twenty-year period is one of the results, which could be considered as an indicator of virtual organization impacts.

     

A Robust Data‐Mining Approach to Bankruptcy Prediction

In this study, new variants of genetic programming (GP), namely gene expression programming (GEP) and multi‐expression programming (MEP), are utilized to build models for bankruptcy prediction. Generalized relationships are obtained to classify samples of 136 bankrupt and non‐bankrupt Iranian corporations based on their financial ratios. An important contribution of this paper is to identify the effective predictive financial ratios on the basis of an extensive bankruptcy prediction literature review and upon a sequential feature selection analysis. The predictive performance of the GEP and MEP forecasting methods is compared with the performance of traditional statistical methods and a generalized regression neural network. The proposed GEP and MEP models are effectively capable of classifying bankrupt and non‐bankrupt firms and outperform the models developed using other methods. Copyright © 2011 John Wiley & Sons, Ltd.     

Large-scale traveling ionospheric disturbances observed by GPS receivers in Antarctica

The paper examines the propagation direction and velocity of largescale traveling ionospheric disturbances (LSTIDs) during extreme geomagnetic storms in the 23rd solar cycle (e.g., October 2003 and No-vember 2003 storms) using GPS observations. In the analysis, the time delay between the vertical total electron content (VTEC) structures at Scott Base, McMurdo, Davis and Casey GPS stations and the distance between these stations were the main parameters in the determination of LSTIDs propagation speed and di...     

A Cu-Cr alloy with nano and microscale Cr particles produced in a water-cooled copper mold

Microstructures have profound effects on the hardness and strength of Cu-Cr alloys. The microstructures of a Cu-Cr alloy cast in a water-cooled copper mold were studied in the present work. The scanning electron microscopy (SEM) results show that there are the copper matrix saturated with chromium, spherical precipitates of chromium separated from liquid phase during cooling before the initiation of solidification, and a eutectic phase in grain boundary areas. To investigate the effect of age-hardening treatment on the microstructures and properties of the material, some samples were subsequently age-hardened in a salt bath and investigated by transmission electron microscopy (TEM). The results show that coherent precipitates with the diameter of 11 nm are detectable in the samples before and after the age-hardening stage. Of course, the volume fraction of coherent precipitates is higher after the aging process.     

Preparation,characterization, and antibacterial activity of γ-irradiated silver nanoparticles in aqueous gelatin

Colloidal silver nanoparticles (Ag-NPs) were obtained through γ-irradiation of aqueous solutions containing AgNO₃ and gelatin as a silver source and stabilizer, respectively. The absorbed dose of γ-irradiation influences the particle diameter of the Ag-NPs, as evidenced from surface plasmon resonance (SPR) and transmission electron microscopy (TEM) images. When the γ-irradiation dose was increased (from 2 to 50 kGy), the mean particle size was decreased continuously as a result of γ-induced Ag-NPs fragmentation. The antibacterial properties of the Ag-NPs were tested against Methicillinresistant Staphylococcus aureus (MRSA) (Gram-positive) and Pseudomonas aeruginosa (P.a) (Gram-negative) bacteria. This approach reveals that the γ-irradiation-mediated method is a promising simple route for synthesizing highly stable Ag-NPs in aqueous solutions with good antibacterial properties for different applications.     

Processing of nanostructured metallic matrix composites by a modified accumulative roll bonding method with structural and mechanical considerations

Particulate reinforced metallic matrix composites have attracted considerable attention due to their lightweight, high strength, high specific modulus, and good wear resistance. Al/B₄C composite strips were produced in this work by a modified accumulative roll bonding process where the strips were rotated 90° around the normal direction between successive passes. Transmission electron microscopy and X-ray diffraction analyses reveal the development of nanostructures in the Al matrix after seven passes. It is found that the B₄C reinforcement distribution in the matrix is improved by progression of the process. Additionally, the tensile yield strength and elongation of the processed materials are increased with the increase of passes.     

Production of ultra-transparent glass-ceramics via controlled crystallization of nanocrystals in the glassy matrix of LAST

Microstructural variation in glass-ceramics encompasses the range from nanocrystalline transparent materials to microcrystalline tough materials. In this investigation, the crystallization process was controlled for the development of ultra transparent Li₂O-Al₂O₃-SiO₂ glass-ceramics containing TiO₂ as a nucleating agent (LAST). Results of UV-Vis absorption spectra were compared with the expected theoretical values calculated by the Rayleigh scattering method for the determination of ultra transparency. Results of the investigation illustrate that the control of crystallization increases the range of ultra transparency by the reduction of crystal size and their uniformity in the glassy matrix. Last but not the least, the optimized samples are ultra transparent approximately in the whole light wavelengths.     

不同应变速率下Mg?B4C纳米复合材料的力学性能表征

Magnesium has wide application in industry. The main purpose of this investigation was to improve the properties of magnesium by reinforcing it using B₄C nanoparticles. The reinforced nanocomposites were fabricated using a powder compaction technique for 0, 1.5vol%, 3vol%, 5vol%, and 10vol% of B₄C. Powder compaction was conducted using a split Hopkinson bar (SHB), drop hammer (DH), and Instron to reach different compaction loading rates. The compressive stress–strain curves of the samples were captured from quasi-static and dynamic tests carried out using an Instron and split Hopkinson pressure bar, respectively. Results revealed that, to achieve the highest improvement in ultimate strength, the contents of B₄C were 1.5vol%, 3vol%, and 3vol% for Instron, DH, and SHB, respectively. These results also indicated that the effect of compaction type on the quasi-static strength of the samples was not as significant, although its effect on the dynamic strength of the samples was remarkable. The improvement in ultimate strength obtained from the quasi-static stress–strain curves of the samples (compared to pure Mg) varied from 9.9% for DH to 24% for SHB. The dynamic strength of the samples was improved (with respect to pure Mg) by 73%, 116%, and 141% for the specimens compacted by Instron, DH, and SHB, respectively. The improvement in strength was believed to be due to strengthening mechanisms, friction, adiabatic heating, and shock waves.