Warped time lens in temporal imaging for optical real-time data compression

We introduce for the first time the concept of anamorphic temporal imaging and its application to analog data compression in a time lens. Placed in front of a conventional spectrometer, this technique enhances the spectral resolution and the update rate. More importantly, it performs real-time optical data compression to reduce the volume of the generated digital data. Our technique introduces the concept of the warped time lens. We show that a specific class of warped time-to-frequency mapping operations combined with the nonlinear operation inherent in a photo-detector compresses the time-bandwidth product in a temporal imaging system. We employ our newly introduced Stretched Modulation Distribution to design the warp profile. Using this method, the narrow spectral features beyond the spectrometer resolution can be captured and at the same time the output bandwidth and hence the record length is minimized. The reduction in the record length results in higher update rate for the spectrometer without sacrificing the spectral resolution or bandwidth. Our method also benefits from amplitude and phase detection to recover the input complexfield spectrum. By compressing the time-bandwidth product, anamorphictemporal imaging addresses the Big Data problem in such highthroughput instruments.     

Structural basis for the selectivity of the external thioesterase of the surfactin synthetase

Non-ribosomal peptide synthetases (NRPS) and polyketide synthases (PKS) found in bacteria, fungi and plants use two different types of thioesterases for the production of highly active biological compounds. Type I thioesterases (TEI) catalyse the release step from the assembly line of the final product where it is transported from one reaction centre to the next as a thioester linked to a 4'-phosphopantetheine (4'-PP) cofactor that is covalently attached to thiolation (T) domains. The second enzyme involved in the synthesis of these secondary metabolites, the type II thioesterase (TEII), is a crucial repair enzyme for the regeneration of functional 4'-PP cofactors of holo-T domains of NRPS and PKS systems. Mispriming of 4'-PP cofactors by acetyl- and short-chain acyl-residues interrupts the biosynthetic system. This repair reaction is very important, because roughly 80% of CoA, the precursor of the 4'-PP cofactor, is acetylated in bacteria. Here we report the three-dimensional structure of a type II thioesterase from Bacillus subtilis free and in complex with a T domain. Comparison with structures of TEI enzymes shows the basis for substrate selectivity and the different modes of interaction of TEII and TEI enzymes with T domains. Furthermore, we show that the TEII enzyme exists in several conformations of which only one is selected on interaction with its native substrate, a modified holo-T domain.     

Effects of intermediate Ni layer on mechanical properties of Al–Cu layered composites fabricated through cold roll bonding

Layered composites have attracted considerable interest in the recent literature on metal composites. Their mechanical properties depend on the quality of the bonding provided by the intermediate layers. In this study, we analyzed the mechanical properties and bond strengths provided by the nickel layer with respect to its thickness and nature (either powder or coating). The results suggest that bond strength decreases with an increase in the content of nickel powder. At 0.3vol% of nickel coating, we found the nature of nickel to be less efficient in terms of bond strength. A different picture arose when the content of nickel was increased and the bond strength increased in nickel coated samples. In addition, the results demonstrate that mechanical properties such as bend strength are strongly dependent on bond strength.     

A Systemic Framework for Business Model Design and Development -Part B: Practical Perspective

Systemic Practice and Action Research - Profit-making requires innovation in the design of a successful business model that brings about sustainable competitive advantage for the organization....     

Facile cathodic electrosynthesis and characterization of iron oxide nano-particles

Fe2O3 nano-particles have been synthesized by simple cathodic electrodeposition from the low-temperature nitrate bath.The morphology and crystal structure of the obtained oxide powder were analyzed by means of scanning and transmission microscopy(SEM and TEM),X-ray diffraction(XRD) and Fourier transform infrared(FTIR) spectroscopy.Thermal behavior and phase transformation during the heat treatment of as-deposited sample were investigated by differential scanning calorimetry(DSC) and thermogramimetric analysis(TGA).The results showed that the deposited Fe2O3 was composed of the nanoparticles with grain size of approximately 10-60 nm.A serious problem during cathodic electrodeposition of iron oxide was splashing of deposit into electrolyte due to its low adhesion.This problem was tackled by reducing the bath temperature and dielectric constant of solvent.     

Bilirubin sensor based on CuO-CdO composites deposited in a nafion/glassy carbon electrode matrixes

Copper oxide-cadmium oxide nanocomposites(CuO-CdO NCs) were synthesized by solvothermal technique in a basic medium. CuO-CdO NCs were characterized using conventional techniques, such as Fourier Transform Infrared Spectroscopy(FTIR), UV–Visible Spectroscopy(UV/Vis), Field-Emission Scanning Electron Microscopy(FESEM), X-ray electron dispersive spectroscopy(XEDS), X-ray photoelectron spectroscopy(XPS), and powder X-ray diffraction(XRD). A selective and enzyme-less Bilirubin(BLR) sensor was developed with a thin-layer of NCs onto a glassy carbon electrode(GCE, surface area = 0.0316 cm~2) using 5% nafion binders at room conditions. Improved electrochemical performances of higher sensitivity, lower detection limit,linear dynamic range(LDR), and long-term stability of preferred BLR were achieved by a reliable currentvoltage(I-V) approach. The calibration curve was found linear(R~2= 0.9347) in a wide range of BLR concentration(10.0 pM ~ 10.0 mM). Based on the signal to noise ratio value of 3, the sensitivity and limit of detection(LOD) of the sensor were calculated as 95.0 pA μM~(-1) cm~(-2) and 1.0 ± 0.1 pM respectively.Solvothermally synthesized CuO-CdO NCs/GCE is an excellent advancement of developing a selective and sensitive BLR sensor by electrochemical approach and practically implemented in real sample applications.     

Effect of salinity and planting density on physiological responses of Allenrolfea occidentalis

Physiological responses of Allenrolfea occidentalis to salinity and seedling density were investigated. Effects of salinity (0, 200, 400, 600, 800, and 1000 mM NaCl) and 3 planting densities (2000, 4000, 6000 plants m -2 ) on the growth, survival, and ecophysiology of A. occidentalis , a stem succulent inland halophyte, were studied under controlled greenhouse conditions. Plants were grown in a sand culture using subirrigation. Dry mass of roots was highest at 600 mM NaCl at low density (2000 plants m -2 ), but declined as salinity increased. Tissue water content was highest at the 200 mM NaCl treatment and decreased with increased salinity. Water potential of the plants became more negative with increasing salinity due to the accumulation of NaCl in the leaves. Inorganic ions, especially Na + and Cl - , contributed substantially to dry mass. Na + and Cl - concentration in shoots and roots increased when NaCl level was increased while K + , Ca ++ , Mg ++ , SO 4 -- , and NO 3 - contents decreased. Net photosynthesis increased at low salinity (200 mM), but photosynthesis at other salinities was not significantly different from the control. While A. occidentalis is very salt tolerant and photosynthesis functioned reasonably well at high salinities, extremely high salinity did decrease dry mass of roots and shoots.     

Large-scale traveling ionospheric disturbances observed by GPS receivers in Antarctica

The paper examines the propagation direction and velocity of largescale traveling ionospheric disturbances (LSTIDs) during extreme geomagnetic storms in the 23rd solar cycle (e.g., October 2003 and No-vember 2003 storms) using GPS observations. In the analysis, the time delay between the vertical total electron content (VTEC) structures at Scott Base, McMurdo, Davis and Casey GPS stations and the distance between these stations were the main parameters in the determination of LSTIDs propagation speed and di...     

Preparation,characterization, and antibacterial activity of γ-irradiated silver nanoparticles in aqueous gelatin

Colloidal silver nanoparticles (Ag-NPs) were obtained through γ-irradiation of aqueous solutions containing AgNO₃ and gelatin as a silver source and stabilizer, respectively. The absorbed dose of γ-irradiation influences the particle diameter of the Ag-NPs, as evidenced from surface plasmon resonance (SPR) and transmission electron microscopy (TEM) images. When the γ-irradiation dose was increased (from 2 to 50 kGy), the mean particle size was decreased continuously as a result of γ-induced Ag-NPs fragmentation. The antibacterial properties of the Ag-NPs were tested against Methicillinresistant Staphylococcus aureus (MRSA) (Gram-positive) and Pseudomonas aeruginosa (P.a) (Gram-negative) bacteria. This approach reveals that the γ-irradiation-mediated method is a promising simple route for synthesizing highly stable Ag-NPs in aqueous solutions with good antibacterial properties for different applications.