Influence of catalyst on structural and morphological properties of TiO2 nanostructured films prepared by sol–gel on glass

Transparent TiO2 thin films have been prepared by the sol-gel method using titanium alkoxides as precursors.Thin films were deposited on glass supports by the dip-coating technique.The TiO2 layer acts as a self-cleaning coating generated from its photocatalysis and photoinduced superhydrophilicity.The crystalline structure of TiO2 films was dominantly identified as the anatase phase,consisted of uniform spherical particles of about 14-50 nm in size,which strongly depends upon catalyst-type and heat treatment temperature.Increasing heat treating temperature can lead to an increase in crystalline size.The results indicated that the sample S.S(sample derived from sol containing sulfuric acid as catalyst) exhibits superhydrophilic nature and better photocatalytic activity,which can be attributed to its higher anatase content and lower crystalline size.Morphological studies,carried out using Atomic Force Microscopy(AFM),confirm the presence of crystalline phase with such a grain size and low surface roughness.Thus,the applied films exhibiting high photocatalytic activity,superhydrophilic behavior,and low surface roughness can be used as an efficient self-cleaning coating on glass and other optical applications.     

Cu-Zn-Al2O3 nanocomposites:study of microstructure,corrosion,and wear properties

Alumina nanoparticles were added to a Cu-Zn alloy to investigate their effect on the microstructural, tribological, and corrosion properties of the prepared alloys. Alloying was performed using a mixture of copper and zinc powders with 0vol% and 5vol% of α-Al nanopowder in a satellite ball mill. The results showed that the Cu-Zn solid solution formed after 18 h of mechanical alloying. The mechanically alloyed powder was compacted followed by sintering of the obtained green compacts at 750℃ for 30 min. Alumina nanoparticles were uniformly distributed in the matrix of the Cu-Zn alloy. The tribological properties were evaluated by pin-on-disk wear tests, which revealed that, upon the addition of alumina nanoparticles, the coefficient of friction and the wear rate were reduced to 20% and 40%, respectively. The corrosion properties of the samples exposed to a 3.5wt% NaCl solution were studied using the immersion and potentiodynamic polarization methods, which revealed that the addition of alumina nanoparticles reduced the corrosion current of the nanocomposite by 90%.     

Monetary policy,composite leading economic indicators and predicting the 2001 recession

On 26 November 2001, the National Bureau of Economic Research announced that the US economy had officially entered into a recession in March 2001. This decision was a surprise and did not end all the conflicting opinions expressed by economists. This matter was finally settled in July 2002 after a revision to the 2001 real gross domestic product showed negative growth rates for its first three quarters. A series of political and economic events in the years 2000–01 have increased the amount of uncertainty in the state of the economy, which in turn has resulted in the production of less reliable economic indicators and forecasts. This paper evaluates the performance of two very reliable methodologies for predicting a downturn in the US economy using composite leading economic indicators (CLI) for the years 2000–01. It explores the impact of the monetary policy on CLI and on the overall economy and shows how the gradualness and uncertainty of this impact on the overall economy have affected the forecasts of these methodologies. It suggests that the overexposure of the CLI to the monetary policy tools and a strong, but less effective, expansionary money policy have been the major factors in deteriorating the predictions of these methodologies. To improve these forecasts, it has explored the inclusion of the CLI diffusion index as a prior in the Bayesian methodology. Copyright © 2004 John Wiley & Sons, Ltd.     

A Robust Data‐Mining Approach to Bankruptcy Prediction

In this study, new variants of genetic programming (GP), namely gene expression programming (GEP) and multi‐expression programming (MEP), are utilized to build models for bankruptcy prediction. Generalized relationships are obtained to classify samples of 136 bankrupt and non‐bankrupt Iranian corporations based on their financial ratios. An important contribution of this paper is to identify the effective predictive financial ratios on the basis of an extensive bankruptcy prediction literature review and upon a sequential feature selection analysis. The predictive performance of the GEP and MEP forecasting methods is compared with the performance of traditional statistical methods and a generalized regression neural network. The proposed GEP and MEP models are effectively capable of classifying bankrupt and non‐bankrupt firms and outperform the models developed using other methods. Copyright © 2011 John Wiley & Sons, Ltd.     

Mutations in a new photoreceptor-pineal gene on 17p cause Leber congenital amaurosis

Leber congenital amaurosis (LCA, MIM 204000) accounts for at least 5% of all inherited retinal disease and is the most severe inherited retinopathy with the earliest age of onset. Individuals affected with LCA are diagnosed at birth or in the first few months of life with severely impaired vision or blindness, nystagmus and an abnormal or flat electroretinogram (ERG). Mutations in GUCY2D (ref. 3), RPE65 (ref. 4) and CRX (ref. 5) are known to cause LCA, but one study identified disease-causing GUCY2D mutations in only 8 of 15 families whose LCA locus maps to 17p13.1 (ref. 3), suggesting another LCA locus might be located on 17p13.1. Confirming this prediction, the LCA in one Pakistani family mapped to 17p13.1, between D17S849 and D17S960-a region that excludes GUCY2D. The LCA in this family has been designated LCA4 (ref. 6). We describe here a new photoreceptor/pineal-expressed gene, AIPL1 (encoding aryl-hydrocarbon interacting protein-like 1), that maps within the LCA4 candidate region and whose protein contains three tetratricopeptide (TPR) motifs, consistent with nuclear transport or chaperone activity. A homozygous nonsense mutation at codon 278 is present in all affected members of the original LCA4 family. AIPL1 mutations may cause approximately 20% of recessive LCA, as disease-causing mutations were identified in 3 of 14 LCA families not tested previously for linkage.     

Robust Control of Robotic Manipulators in the Task-Space Using an Adaptive Observer Based on Chebyshev Polynomials

In this paper, an adaptive observer for robust control of robotic manipulators is proposed.The lumped uncertainty is estimated using Chebyshev polynomials. Usually, the uncertainty upper bound is required in designing observer-controller structures. However, obtaining this bound is a challenging task. To solve this problem, many uncertainty estimation techniques have been proposed in the literature based on neuro-fuzzy systems. As an alternative, in this paper, Chebyshev polynomials have been applied to uncertainty estimation due to their simpler structure and less computational load.Based on strictly-positive-real(SPR) Lyapunov theory, the stability of the closed-loop system can be verified. The Chebyshev coefficients are tuned based on the adaptation rules obtained in the stability analysis. Also, to compensate the truncation error of the Chebyshev polynomials, a continuous robust control term is designed while in previous related works, usually a discontinuous term is used. An SCARA manipulator actuated by permanent magnet DC motors is used for computer simulations.Simulation results reveal the superiority of the designed method.     

Cu-Zn-Al2O3 nanocomposites: study of microstructure,corrosion, and wear properties

Alumina nanoparticles were added to a Cu-Zn alloy to investigate their effect on the microstructural, tribological, and corrosion properties of the prepared alloys. Alloying was performed using a mixture of copper and zinc powders with 0vol% and 5vol% of α-Al nanopowder in a satellite ball mill. The results showed that the Cu-Zn solid solution formed after 18 h of mechanical alloying. The mechan-ically alloyed powder was compacted followed by sintering of the obtained green compacts at 750℃ for 30 min. Alumina nanoparticles were uniformly distributed in the matrix of the Cu-Zn alloy. The tribological properties were evaluated by pin-on-disk wear tests, which revealed that, upon the addition of alumina nanoparticles, the coefficient of friction and the wear rate were reduced to 20% and 40%, respectively. The corrosion properties of the samples exposed to a 3.5wt% NaCl solution were studied using the immersion and potentiodynamic polarization methods, which revealed that the addition of alumina nanoparticles reduced the corrosion current of the nanocomposite by 90%.     

Gains of glycosylation comprise an unexpectedly large group of pathogenic mutations

Mutations involving gains of glycosylation have been considered rare, and the pathogenic role of the new carbohydrate chains has never been formally established. We identified three children with mendelian susceptibility to mycobacterial disease who were homozygous with respect to a missense mutation in IFNGR2 creating a new N-glycosylation site in the IFNgammaR2 chain. The resulting additional carbohydrate moiety was both necessary and sufficient to abolish the cellular response to IFNgamma. We then searched the Human Gene Mutation Database for potential gain-of-N-glycosylation missense mutations; of 10,047 mutations in 577 genes encoding proteins trafficked through the secretory pathway, we identified 142 candidate mutations ( approximately 1.4%) in 77 genes ( approximately 13.3%). Six mutant proteins bore new N-linked carbohydrate moieties. Thus, an unexpectedly high proportion of mutations that cause human genetic disease might lead to the creation of new N-glycosylation sites. Their pathogenic effects may be a direct consequence of the addition of N-linked carbohydrate.     

Earliest date for milk use in the Near East and southeastern Europe linked to cattle herding

The domestication of cattle, sheep and goats had already taken place in the Near East by the eighth millennium bc. Although there would have been considerable economic and nutritional gains from using these animals for their milk and other products from living animals-that is, traction and wool-the first clear evidence for these appears much later, from the late fifth and fourth millennia bc. Hence, the timing and region in which milking was first practised remain unknown. Organic residues preserved in archaeological pottery have provided direct evidence for the use of milk in the fourth millennium in Britain, and in the sixth millennium in eastern Europe, based on the delta(13)C values of the major fatty acids of milk fat. Here we apply this approach to more than 2,200 pottery vessels from sites in the Near East and southeastern Europe dating from the fifth to the seventh millennia bc. We show that milk was in use by the seventh millennium; this is the earliest direct evidence to date. Milking was particularly important in northwestern Anatolia, pointing to regional differences linked with conditions more favourable to cattle compared to other regions, where sheep and goats were relatively common and milk use less important. The latter is supported by correlations between the fat type and animal bone evidence.