影响聚丙烯酰胺在土壤和水分管理应用的因素

水溶性阴离子聚丙烯酰胺(PAMs)。因其影响土壤的分散、结絮和团聚作用，稳定土壤的结构争提高土壤的渗流，使得土壤地表水的径流、土壤侵蚀和板结程度降低到最小。已被应用于不同的农业目标来有效地控制土壤侵蚀、保护地下水水质和显著地降低动物废弃水中的细菌和养分含量。对影响PAM在土壤和水分管理应用的因素，从土壤和水特性包括土壤质地、溶解盐的浓度、有机质含量对PAM吸附的影响，PAM分子量及其电荷在土壤渗透作用中的作用等两方面进行了评述，介绍了PAM在土壤和水中降解与环境安全问题和今后研究的某些方向。参36。     

Pseudo-<Emphasis Type="Italic">in-situ</Emphasis> stir casting: a new method for production of aluminum matrix composites with bimodal-sized B<Subscript>4</Subscript>C reinforcement

A new method was applied to produce an Al-0.5wt%Ti-0.3wt%Zr/5vol%B₄C composite via stir casting with the aim of characterizing the microstructure of the resulting composite. For the production of the composite, large B₄C particles (larger than 75 μm) with no pre-heating were added to the stirred melt. Reflected-light microscopy, X-ray diffraction, scanning electron microscopy, field-emission scanning electron microscopy, laser particle size analysis, and image analysis using the Clemex software were performed on the cast samples for microstructural analysis and phase detection. The results revealed that as a consequence of thermal shock, B₄C particle breakage occurred in the melt. The mechanism proposed for this phenomenon is that the exerted thermal shock in combination with the low thermal shock resistance of B₄C and large size of the added B₄C particles were the three key parameters responsible for B₄C particle breakage. This breakage introduced small particles with sizes less than 10 μm and with no contamination on their surfaces into the melt. The mean particle distance measured via image analysis was approximately 60 μm. The coefficient of variation index, which was used as a measure of particle distribution homogeneity, showed some variations, indicating a relatively homogeneous distribution.     

PLGA/硬石复合涂层镁基纳米复合材料在植入应用时的体外生物活性和腐蚀行为

A type of polymer/ceramic coating was introduced on a magnesium-based nanocomposite, and the nanocomposite was evaluated for implant applications. The microstructure, corrosion, and bioactivity of the coated and uncoated samples were assessed. Mechanical alloying followed by sintering was applied to fabricate the Mg–3Zn–0.5Ag–15NiTi nanocomposite substrate. Moreover, different contents of poly(lactic-co-glycolic acid) (PLGA) coatings were studied, and 10wt% of PLGA content was selected. The scanning electron microscopy (SEM) images of the bulk nanocomposite showed an acceptable homogenous dispersion of the NiTi nanoparticles (NPs) in the Mg-based matrix. In the in vitro bioactivity evaluation, following the immersion of the uncoated and coated samples in a simulated body fluid (SBF) solution, the Ca/P atomic ratio demonstrated that the apatite formation amount on the coated sample was greater than that on the uncoated nanocomposite. Furthermore, assessing the corrosion resistance indicated that the coatings on the Mg-based substrate led to a corrosion current density (i_corr) that was considerably lower than that of the substrate. Such a condition revealed that the coating would provide an obstacle for the corrosion. Based on this study, the PLGA/hardystonite (HT) composite-coated Mg–3Zn–0.5Ag–15NiTi nanocomposite may be suitably applied as an orthopedic implant biomaterial.     

Exchange rate forecasting with optimum singular spectrum analysis

Forecasting exchange rate is undoubtedly an attractive and challenging issue that has been of interest in different domains for many years. The singular spectrum analysis （SSA） technique has been used as a promising technique for time series forecasting including exchange rate series. The SSA technique is based upon two main choices： Window length, L, and the number of singular values, r. These values are very important for the reconstruction stage and forecasting purposes. Here the authors consider an optimum version of the SSA technique for forecasting exchange rates. The forecasting performances of the SSA technique for one-step-ahead forecast of six exchange rate series are used to find the best L and r.     

Effects of heat treatment on the intermetallic compounds and mechanical properties of the stainless steel 321-aluminum 1230 explosive-welding interface

The effects of heat treatment on the microstructure and mechanical properties of intermetallic compounds in the interface of stainless steel 321 explosively bonded to aluminum 1230 were investigated in this study. Experimental investigations were performed by optical microscopy, scanning electron microscopy, and microhardness and shear tensile strength testing. Prior to heat treatment, increasing the stand-off distance between samples from 1 to 2.5 mm caused their interface to become wavy and the thickness of intermetallic layers to increase from 3.5 to 102.3 μm. The microhardness increased from HV 766 in the sample prepared at a stand-off distance of 1 mm to HV 927 in the sample prepared at a stand-off distance of 2.5 mm; in addition, the sample strength increased from 103.2 to 214.5 MPa. Heat treatment at 450℃ for 6 h increased the thickness of intermetallic compound layers to 4.4 and 118.5 μm in the samples prepared at stand-off distances of 1 and 2.5 mm, respectively. These results indicated that increasing the duration and temperature of heat treatment decreased the microhardness and strength of the interface of explosively welded stainless steel 321-Al 1230 and increased the thickness of the intermetallic region.     

Synergistic effect of Al and Gd on enhancement of mechanical properties of magnesium alloys

The effect of Gd/Al ratio on the properties of as-cast Mg-Gd-Al-Zn alloys was investigated by changing the chemical composition from that of AZ61 to GZ61. At the ratio of 1, the Al2Gd phase becomes predominant and Mg17Al12 is hardly seen in the microstructure. As a potent inoculant, the Al2Gd phase resulted in intense grain refinement and enhancement of strength, ductility and toughness. For instance, the tensile strength and elongation to failure of Mg-3Gd-3Al-1Zn alloy were enhanced by ~4% and 180% compared with those of AZ61 alloy, respectively. However, at high Gd/Al ratios, the Al2Gd phase was replaced by (Mg,Al)3Gd and Mg5Gd phases and very large grain sizes were achieved, which led to poor tensile properties and the appearance of cleavage facets on the fracture surfaces. Therefore, it can be deduced that the presence of Gd and Al, in appropriate amounts to reach Gd/Al ratio of ~ 1, is required for the achievement of grain refinement, good ductility, high strength, and the appearance of ductile fracture surfaces in the Mg-Gd-Al-Zn system. Conclusively, the Mg-Gd-Al-Zn alloys can be considered as a new class of structural magnesium alloy and it is superior to both AZ (Mg-Al-Zn) and GZ (Mg-Gd-Zn) series of alloys.     

Identification of large ancient duplications associated with human gene deserts

We identified 15 regions of >1 Mb in the human genome composed of large ancient local duplications corresponding to gene deserts. We detected these intrachromosomal duplications in mouse and dog but not in chicken; they present as patches of similarity as low as 60%. These findings suggest that some human gene deserts originated from duplications of segments lacking genes in a mammalian common ancestor.     

SNP and haplotype mapping for genetic analysis in the rat

The laboratory rat is one of the most extensively studied model organisms. Inbred laboratory rat strains originated from limited Rattus norvegicus founder populations, and the inherited genetic variation provides an excellent resource for the correlation of genotype to phenotype. Here, we report a survey of genetic variation based on almost 3 million newly identified SNPs. We obtained accurate and complete genotypes for a subset of 20,238 SNPs across 167 distinct inbred rat strains, two rat recombinant inbred panels and an F2 intercross. Using 81% of these SNPs, we constructed high-density genetic maps, creating a large dataset of fully characterized SNPs for disease gene mapping. Our data characterize the population structure and illustrate the degree of linkage disequilibrium. We provide a detailed SNP map and demonstrate its utility for mapping of quantitative trait loci. This community resource is openly available and augments the genetic tools for this workhorse of physiological studies.     

伊朗马什哈德多层住宅能耗水平研究

近20年来在伊朗马什哈德地区出现了一些形式特别的多层住宅,有大面积的东西外墙,且采用普通空心黏土砌块建造,热工性能差,造成此类型建筑采暖空调能耗较大。采用DeST-h模拟分析了不同东西墙体条件下马什哈德地区典型多层住宅的能耗情况,房间布置对楼层能耗的影响,以及不同楼层之间的能耗对比。结果表明东西墙的能耗约占总能耗的33%,在西墙或东墙有相邻房间的情况下,采暖和空调能耗分别降低37%和15%;房间布置和楼层布置对不同楼层的能耗较大影响。因此在设计时要特别注意建筑以及楼层中房间的布置。